| 2776 |
rexy |
1 |
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
|
|
|
2 |
Home page is http://smartmontools.sourceforge.net/
|
|
|
3 |
|
|
|
4 |
=== START OF INFORMATION SECTION ===
|
|
|
5 |
Device Model: Hitachi HDS722020ALA330
|
|
|
6 |
Serial Number: JK1121[rest of serial number redacted]
|
|
|
7 |
Firmware Version: JKAOA20N
|
|
|
8 |
User Capacity: 2,000,398,934,016 bytes
|
|
|
9 |
Device is: Not in smartctl database [for details use: -P showall]
|
|
|
10 |
ATA Version is: 8
|
|
|
11 |
ATA Standard is: ATA-8-ACS revision 4
|
|
|
12 |
Local Time is: Tue Dec 1 15:21:30 2009 CST
|
|
|
13 |
SMART support is: Available - device has SMART capability.
|
|
|
14 |
SMART support is: Enabled
|
|
|
15 |
|
|
|
16 |
=== START OF READ SMART DATA SECTION ===
|
|
|
17 |
SMART overall-health self-assessment test result: PASSED
|
|
|
18 |
|
|
|
19 |
General SMART Values:
|
|
|
20 |
Offline data collection status: (0x84) Offline data collection activity
|
|
|
21 |
was suspended by an interrupting command from host.
|
|
|
22 |
Auto Offline Data Collection: Enabled.
|
|
|
23 |
Self-test execution status: ( 0) The previous self-test routine completed
|
|
|
24 |
without error or no self-test has ever
|
|
|
25 |
been run.
|
|
|
26 |
Total time to complete Offline
|
|
|
27 |
data collection: (21742) seconds.
|
|
|
28 |
Offline data collection
|
|
|
29 |
capabilities: (0x5b) SMART execute Offline immediate.
|
|
|
30 |
Auto Offline data collection on/off support.
|
|
|
31 |
Suspend Offline collection upon new
|
|
|
32 |
command.
|
|
|
33 |
Offline surface scan supported.
|
|
|
34 |
Self-test supported.
|
|
|
35 |
No Conveyance Self-test supported.
|
|
|
36 |
Selective Self-test supported.
|
|
|
37 |
SMART capabilities: (0x0003) Saves SMART data before entering
|
|
|
38 |
power-saving mode.
|
|
|
39 |
Supports SMART auto save timer.
|
|
|
40 |
Error logging capability: (0x01) Error logging supported.
|
|
|
41 |
General Purpose Logging supported.
|
|
|
42 |
Short self-test routine
|
|
|
43 |
recommended polling time: ( 1) minutes.
|
|
|
44 |
Extended self-test routine
|
|
|
45 |
recommended polling time: ( 255) minutes.
|
|
|
46 |
SCT capabilities: (0x003d) SCT Status supported.
|
|
|
47 |
SCT Feature Control supported.
|
|
|
48 |
SCT Data Table supported.
|
|
|
49 |
|
|
|
50 |
SMART Attributes Data Structure revision number: 16
|
|
|
51 |
Vendor Specific SMART Attributes with Thresholds:
|
|
|
52 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|
|
53 |
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
|
|
|
54 |
2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 98
|
|
|
55 |
3 Spin_Up_Time 0x0007 123 123 024 Pre-fail Always - 587 (Average 584)
|
|
|
56 |
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 16
|
|
|
57 |
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
|
|
|
58 |
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
|
|
|
59 |
8 Seek_Time_Performance 0x0005 114 114 020 Pre-fail Offline - 38
|
|
|
60 |
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 292
|
|
|
61 |
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
|
|
|
62 |
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16
|
|
|
63 |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 16
|
|
|
64 |
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 16
|
|
|
65 |
194 Temperature_Celsius 0x0002 230 230 000 Old_age Always - 27 (Lifetime Min/Max 20/45)
|
|
|
66 |
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|
|
67 |
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
|
|
|
68 |
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
|
|
|
69 |
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
|
|
|
70 |
|
|
|
71 |
SMART Error Log Version: 0
|
|
|
72 |
No Errors Logged
|
|
|
73 |
|
|
|
74 |
SMART Self-test log structure revision number 1
|
|
|
75 |
No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|
|
76 |
|
|
|
77 |
SMART Selective self-test log data structure revision number 1
|
|
|
78 |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|
|
79 |
1 0 0 Not_testing
|
|
|
80 |
2 0 0 Not_testing
|
|
|
81 |
3 0 0 Not_testing
|
|
|
82 |
4 0 0 Not_testing
|
|
|
83 |
5 0 0 Not_testing
|
|
|
84 |
Selective self-test flags (0x0):
|
|
|
85 |
After scanning selected spans, do NOT read-scan remainder of disk.
|
|
|
86 |
If Selective self-test is pending on power-up, resume after 0 minute delay.
|