0,0 → 1,284 |
----------/etc/config/uLinux.conf---------- |
[System] |
Model = TS-439 |
Internal Model = TS-439 |
Server comment = american |
Version = 3.1.2 |
Build Number = 1014T |
Time Zone = America/Phoenix |
Enable Daylight Saving Time = TRUE |
Workgroup = DODOES |
Code Page = 437 |
System Device = /dev/sdx |
Test Mode = FALSE |
Auto Create Raid = raid0 |
Wan Access = TRUE |
Lan Access = TRUE |
Web Access Port = 8080 |
E2KEY Support = FALSE |
Rsync Support = TRUE |
Rsync Model = QNAP |
FS Type = ext3 |
Auto PowerOn = FALSE |
Quota Type = vfsv0 |
Write Connection Log = 0 |
|
Booting = 0 |
Server Name = american |
UPNP_UUID = 76c5f8aa-558a-40f7-a07e-3f4ea6ab79ff |
Redundant Power Enable = FALSE |
[Test] |
Test Program = /sbin/test/Self-test-main |
|
[NTP] |
USE NTP Server = FALSE |
NTP Server IP = pool.ntp.org |
Enable NTP Server = FALSE |
Server1 IP = |
Server2 IP = |
Sercer3 IP = |
Interval = 1 |
TimeUnit = DAY |
|
[Alert] |
Alert Level = 0 |
SMTP IP = 0.0.0.0 |
Alert Mail = |
SMS Mode = 0 |
|
[Network] |
Interface Number = 2 |
DNS = 0.0.0.0 |
WINS IP = 0.0.0.0 |
WINS Enable = False |
BONDING Support = TRUE |
BONDING01 = Interface1 |
BONDING02 = Interface2 |
Domain Name Server 1 = 0.0.0.0 |
Domain Name Server 2 = 0.0.0.0 |
[bond0] |
Bonding Mode = 4 |
Configure = TRUE |
Use DHCP = TRUE |
Usage = DHCP |
IP Address = 169.254.100.100 |
Subnet Mask = 255.255.0.0 |
Broadcast = 169.254.255.255 |
Gateway = 169.254.100.100 |
Speed = auto |
MTU = 1500 |
|
[eth0] |
Configure = False |
Use DHCP = TRUE |
Usage = DHCP |
IP Address = 169.254.100.100 |
Subnet Mask = 255.255.0.0 |
Broadcast = 192.168.255.255 |
Gateway = 169.254.100.100 |
Speed = auto |
MTU = 1500 |
|
[eth1] |
Configure = False |
Use DHCP = TRUE |
Usage = DHCP |
IP Address = 169.254.100.100 |
Subnet Mask = 255.255.0.0 |
Broadcast = 192.168.255.255 |
Gateway = 169.254.100.100 |
Speed = auto |
MTU = 1500 |
|
[Samba] |
Enable = TRUE |
[Appletalk] |
Enable = TRUE |
Default Zone = * |
[SNMP] |
Server Enable = FALSE |
|
[WebFS] |
Enable = TRUE |
Web Root Path = /WWW |
|
[QWEB] |
Enable = 1 |
Port = 80 |
[QPHOTO] |
Enable = TRUE |
[BTDownload] |
Enable = TRUE |
Max_Running = 3 |
Qget_Support = TRUE |
Download_Folder = /share/Qdownload/ |
Total Job = 0 |
Run List Job = 0 |
Pause List Job = 0 |
Finish List Job = 0 |
Overwrite List = 0 |
Max Download Rate = 0 |
Max Upload Rate = 0 |
Port Range From = 6881 |
Port Range To = 6999 |
UPnP Port Forwarding = 0 |
encrypt = 0 |
DT Time = 1 |
S1 Enable = 0 |
S2 Enable = 0 |
[NVR] |
Enable = FALSE |
Support = TRUE |
|
[Storage] |
Auto Init = FALSE |
Disk Drive Number = 4 |
Drive 1 = sda |
Drive 2 = sdb |
Drive 3 = sdc |
Drive 4 = sdd |
Disk Check On Boot = Error |
Auto Fix Disk Check Errors = TRUE |
Support RAID 5 = FALSE |
SUPPORT HOTSWAP = TRUE |
Support Hot Spare = FALSE |
Support LVM = FALSE |
|
Encrypt_sda3 = FALSE |
Encrypt_sdb3 = FALSE |
Encrypt_sdc3 = FALSE |
Encrypt_md0 = FALSE |
[Disk] |
Drive 1 EXIST = 1 |
Drive 2 EXIST = 1 |
Drive 3 EXIST = 1 |
Drive 4 EXIST = 0 |
Drive 5 EXIST = 0 |
|
Drive 13 EXIST = 0 |
Drive 9 EXIST = 1 |
[FTP] |
ServerName = ProFTPD |
Enable = False |
Port = 21 |
MaxInstances = 30 |
User = guest |
Group = guest |
DefaultRoot = /share |
MaxAnonymous = 30 |
AllowAnonymous = False |
Unicode = 0 |
CharsetRemote = 999 |
SSL MODE = 1 |
Passive Enabled = 1 |
Bandwidth Enabled = 0 |
Max connection per account = 10 |
EnableUserWanIp = FALSE |
WanIp = |
[DHCP Server] |
Enable = FALSE |
Start Range = 169.254.1.100 |
End Range = 169.254.1.200 |
Max Lease Time = 86400 |
|
[Printers] |
Support = FALSE |
Enable = False |
Name = |
Comment = Printer port on NAS |
|
Phy exist = 0 |
Phy exist2 = 0 |
Phy exist3 = 0 |
Phy exist4 = 0 |
Phy exist5 = 0 |
[LOGO] |
Show PIC Index = 1 |
PIC Counter = 10 |
Default LOGO Image Path = /etc/config/logo/default_logo_img.gif |
Upload LOGO Image Path = /etc/config/logo/upload_logo_img.gif |
PIC1 LOGO Image Path = /etc/config/logo/pic1_logo_img.gif |
PIC2 LOGO Image Path = /etc/config/logo/pic2_logo_img.gif |
PIC3 LOGO Image Path = /etc/config/logo/pic3_logo_img.gif |
PIC4 LOGO Image Path = /etc/config/logo/pic4_logo_img.gif |
PIC5 LOGO Image Path = /etc/config/logo/pic5_logo_img.gif |
LOGO Image Size Limitation = 20480 |
|
[UPS] |
Support = TRUE |
Serial UPS = FALSE |
Snmp UPS = TRUE |
Daemon Type = 1 |
UPS IP = 0.0.0.0 |
Enable = FALSE |
UPS Type = PhxTec-A1000 |
Shutdown System In = 5 |
ValidCOM = 1 |
AC Power = OK |
Battery Power = OK |
|
[Misc] |
Disk StandBy Timeout = 5 |
Disk StandBy Timeout Enable = TRUE |
Disk Free Size Alert = 3072 |
Disk Free Size Alert Enable = TRUE |
Buzzer Warning Enable = TRUE |
Wake On Lan = FALSE |
|
System Started = TRUE |
Configured = TRUE |
Reset Password Switch = TRUE |
Custom Temp = 0 |
system low temp = 40 |
system high temp = 48 |
[HWTEST] |
mini PCI = Agere Systems |
|
[MySQL] |
Enable = FALSE |
DB_Init = FALSE |
[LOGIN] |
SSH Enable = TRUE |
SSH Port = 22 |
TELNET Enable = FALSE |
TELNET Port = 13131 |
|
[Index] |
Qphoto_LOGO = FALSE |
Qdownlod_LOGO = FALSE |
|
[iSCSI] |
Company Info = 2004-04.com.qnap |
Model Name = TS-439 |
[END_FLAG] |
[usb copy] |
usb_copy_avail = 1 |
lock flag = 0 |
usb copying = 0 |
copy func old = 0 |
copy func = 0 |
internal = Qusb |
copy type = 0 |
[UPnP Service] |
Enable = TRUE |
[NFS] |
Enable = TRUE |
[TwonkyMedia] |
Enable = TRUE |
[iTune] |
Enable = TRUE |
Password Enabled = 0 |
Code Page = CP437 |
[Bonjour Service] |
Web = 1 |
Web Service Name = american |
SAMBA = 1 |
SAMBA Service Name = american(SAMBA) |
AFP = 1 |
AFP Service Name = american(AFP) |
SSH = 0 |
SSH Service Name = american(SSH) |
FTP = 0 |
FTP Service Name = american(FTP) |
[QRAID1] |
device name = |
Property changes: |
Added: svn:eol-style |
+native |
\ No newline at end of property |