| 0,0 → 1,407 |
|---|
| #!/bin/bash |
| # $Id$ |
| |
| # Generic Load balancer for multiple WAN links - version 1.1 (04 Feb 2011) |
| # (c) 2011 Pau Oliva Fora - http://pof.eslack.org |
| # |
| # Licensed under GPLv3 - for full terms see: |
| # http://www.gnu.org/licenses/gpl-3.0.html |
| # |
| # Adapted and debugged (adr et ping -S) by ALCASAR Team (3abtux@alcasar.net) |
| # (c) 2013 3abtux - http://www.alcasar.net |
| # |
| # Specify each WAN link in a separate column, example: |
| # In this example we have 3 wan links (vlanXXX interfaces) attached to a single |
| # physical interface because we use a vlan-enabled switch between the balancer |
| # machine and the ADSL routers we want to balance. The weight parameter should |
| # be kept to a low integer. |
| # |
| # |
| # Modified by ALCASAR team : |
| |
| |
| prog="alcasar-load_balancing.sh" |
| pidfile="/var/run/alcasar-load_balancing.pid" |
| |
| ############################### |
| # MAIN PARAMETERs Configuration |
| ############################### |
| |
| DIR_ETC="/usr/local/etc" |
| CONF_FILE="$DIR_ETC/alcasar.conf" |
| MULTIWAN=`grep MULTIWAN= $CONF_FILE|cut -d"=" -f2` |
| MULTIWAN=${MULTIWAN:=off} |
| FAILOVER=`grep FAILOVER= $CONF_FILE|cut -d"=" -f2` |
| FAILOVER=${FAILOVER:=30} |
| EXTIF=`grep ^EXTIF= $CONF_FILE|cut -d"=" -f2` # INTernal InterFace |
| |
| |
| # space separated list of public IPs to ping in watchdog mode |
| # set this to some public ip addresses pingable and always on. |
| TESTIPS="8.8.8.8 192.0.32.10" |
| |
| # set to 1 when testing, set to 0 when happy with the results |
| VERBOSE=0 |
| |
| # CONFIGURATION ENDS HERE |
| ############################### |
| |
| |
| if [ $(whoami) != "root" ]; then |
| echo "You must be root to run this!" ; echo ; exit 1 |
| fi |
| |
| # Adapter for ALCASAR project |
| CONF_FILE="/usr/local/etc/alcasar.conf" |
| |
| # Virtual interfaces creating |
| function create_eth () { |
| routecmd="ip route replace default scope global" |
| NBIFACE=`grep "^WAN" $CONF_FILE | wc -l` # Nbre interfaces virtuelles |
| i=0 |
| while [ $i -le $NBIFACE ] |
| do |
| INT="WAN$i" |
| echo $INT |
| ACTIVE=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $1}'` # Active |
| WT=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $5}'` # WEIGHT |
| WT=${WT:-1} |
| IP=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $3}' | cut -d"/" -f1` # @IP |
| |
| if [ $i -ne 0 ]; then |
| [ -e /etc/sysconfig/network-scripts/ifcfg-$EXTIF:$i ] && ifdown $EXTIF:$i && rm -f /etc/sysconfig/network-scripts/ifcfg-$EXTIF:$i |
| IFACE=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $2}'` # IFACE |
| IP_NET=`grep "^$INT=" $CONF_FILE | awk -F'"' '{print $2}' | awk -F, '{ print $3}'` # IP |
| NET="`ipcalc -n $IP_NET | cut -d"=" -f2`/`ipcalc -p $IP_NET|cut -d"=" -f2`" |
| GW=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $4}'` # @GW |
| MTU=`grep "$INT=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $6}'` # MTU |
| |
| # Config $EXTIF:$i (Internet) |
| cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF:$i |
| DEVICE=$IFACE |
| BOOTPROTO=static |
| IPADDR=`echo $IP | cut -d"/" -f1` |
| NETMASK=`ipcalc -m $IP_NET | cut -d= -f2` |
| NETWORK=`ipcalc -n $IP_NET | cut -d= -f2` |
| MTU=$MTU |
| ONBOOT=yes |
| NOZEROCONF=yes |
| MII_NOT_SUPPORTED=yes |
| IPV6INIT=no |
| IPV6TO4INIT=no |
| ACCOUNTING=no |
| USERCTL=no |
| EOF |
| echo "ifup $EXTIF:$i" |
| ifup $EXTIF:$i |
| NET="`ipcalc -n $IP_NET | cut -d"=" -f2`/`ipcalc -p $IP_NET|cut -d"=" -f2`" |
| else |
| IFACE="$EXTIF" |
| IP_NET=`grep "^PUBLIC_IP=" $CONF_FILE | awk -F'=' '{print $2}'` # IP/MSK |
| IP=`grep "^PUBLIC_IP=" $CONF_FILE | awk -F= '{ print $2 }' | cut -d"/" -f1` # @IP |
| GW=`grep "^GW=" $CONF_FILE | awk -F= '{print $2}'` # @GW |
| # MTU=`grep "^PUBLIC_MTU=" $CONF_FILE | awk -F= '{print $2}'` # MTU |
| fi # End |
| |
| NET="`ipcalc -n $IP_NET | cut -d"=" -f2`/`ipcalc -p $IP_NET|cut -d"=" -f2`" |
| if [ "$PARAM" == "add" ]; then |
| set -x |
| table=$(($i + 1)) |
| ip route ${PARAM} ${NET} dev ${IFACE} src ${IP} table $table |
| ip route ${PARAM} default via ${GW} table $table |
| ip rule ${PARAM} from ${IP} table $table |
| set +x |
| fi |
| echo " Iface: ${IFACE}" |
| echo " IP: ${IP}" |
| echo " IP_NET: ${IP_NET}" |
| echo " NET: ${NET}" |
| echo " GW: ${GW}" |
| echo " Weight: ${WT}" |
| echo " MTU : ${MTU}" |
| echo |
| routecmd="${routecmd} nexthop via ${GW} dev ${IFACE} weight ${WT}" |
| i=$(($i + 1)) |
| done # End While |
| |
| if [ "$PARAM" == "add" ]; then |
| echo "[] Balanced routing:" |
| # suppress default route |
| ip route del default scope global |
| set -x |
| ${routecmd} |
| set +x |
| echo |
| fi |
| |
| } # end create_eth |
| |
| ########################### |
| # Fonction virtual Interfaces deleting |
| ########################### |
| delete_eth () { |
| IFACE_COUNT=`ls -l /etc/sysconfig/network-scripts/ifcfg-$EXTIF:* | wc -l` |
| echo $IFACE_COUNT |
| while [ $IFACE_COUNT -ne 0 ] |
| do |
| i=$IFACE_COUNT |
| echo "ifdown $EXTIF:$i" |
| ifdown $EXTIF:$i |
| rm -f /etc/sysconfig/network-scripts/ifcfg-$EXTIF:$i |
| IFACE_COUNT=$(($IFACE_COUNT - 1)) |
| done |
| ip route del default scope global |
| # ip route add default gw 192.168.1.1 |
| } |
| |
| |
| # do not modify below this line unless you know what you're doing :) |
| function getvalue() { |
| index=$1 |
| VAR=$2 |
| |
| n=1 |
| for f in ${VAR} ; do |
| if [ "${n}" == "${index}" ]; then |
| echo "$f" |
| break |
| fi |
| n=$(($n++)) |
| done |
| } |
| |
| ###################### |
| # Fonction de FailOver |
| ###################### |
| function failover () { |
| |
| echo "[] Watchdog started" |
| # 0 == all links ok, 1 == some link down |
| STATE=0 |
| |
| DOWNCOUNT_BAK=0 |
| DOWN_BAK="" |
| NBIFACE=`grep "^WAN" $CONF_FILE | wc -l` # Nbre interfaces virtuelles |
| echo "Nombre interfaces = "$NBIFACE |
| WANIFACE[0]="$EXTIF" |
| c=0 |
| while [ $c -le $NBIFACE ]; do |
| ITH=(`grep "WAN$c=" $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $2}'`) # IFACE |
| echo $ITH |
| WANIFACE="${WANIFACE} $ITH" |
| echo $WANIFACE |
| c=$(($c + 1)) |
| done |
| echo "Liste des interfaces : "${WANIFACE[*]} |
| # Failover test |
| while : ; do |
| |
| if [ $VERBOSE -eq 1 ]; then |
| echo "[] Sleeping, state=$STATE" |
| fi |
| sleep $FAILOVER |
| |
| IFINDEX=1 |
| DOWN="" # liste des interfaces down |
| DOWNCOUNT=0 # nombre d'interface down |
| for iface in $WANIFACE ; do |
| COUNT=0 # compteur de test |
| FAIL=0 # Nombre de fois down |
| # Recup de l'adresse IP dynamiquement |
| IP=`ifconfig $iface |grep "inet adr" |cut -f 2 -d ":" |awk '{print $1}'` |
| if [ $i -ne 0 ]; then |
| GW=`grep "$iface," $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $4}'` # @GW |
| WT=`grep "$iface," $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $5}'` # @WT |
| else |
| GW=`grep "^GW=" $CONF_FILE | awk -F= '{print $2}'` # @GW |
| fi |
| for TESTIP in $TESTIPS ; do |
| COUNT=$(($COUNT + 1)) |
| ping -W 3 -I $IP -c 1 $TESTIP > /dev/null 2>&1 |
| # ping -W 3 -I $IP -c 1 $TESTIP |
| # Si ping de la première adresse --> ok --> stop du test pour l'interface testée |
| if [ $? -eq 0 ]; then |
| break |
| else |
| # sinon on compte une erreur |
| FAIL=$(($FAIL + 1)) |
| fi |
| done # End of test sur un serveur Internet |
| # Affichage du nombre de down |
| echo "FAIL=$FAIL" |
| # Si nombre de fois down = nombre de tests --> Iface down --> log dans fichier log avec l'heure |
| if [ $FAIL -eq $COUNT ]; then |
| echo "`date +%F-%Hh%mm%Ss` : [WARN] $iface is down!" |
| # Si etat différent de 1 (déjà tombé) --> changement de l'état général en default |
| if [ $STATE -ne 1 ]; then |
| echo "Switching state $STATE -> 1" |
| STATE=1 |
| fi |
| # Rajout de l'iface dans la liste des interfaces down |
| DOWN="${DOWN} $IFINDEX" |
| echo "DOWN=$DOWN" |
| # Nombre d'interface down |
| DOWNCOUNT=$(($DOWNCOUNT + 1)) |
| echo "DOWNCOUNT=$DOWNCOUNT" |
| fi |
| IFINDEX=$(($IFINDEX + 1)) |
| echo "IFINDEX =$IFINDEX" |
| done # End Test Interface in WANIFACE |
| |
| # 0 Passerelle down et état précédent différent (retour à la normale)) --> mise à la normale des passerelles |
| # if [ $DOWNCOUNT -eq 0 ] && [ $DOWNCOUNT -ne $DOWNCOUNT_BAK ]; then |
| if [ $DOWNCOUNT -eq 0 ] ; then |
| if [ $STATE -eq 1 ]; then |
| echo |
| echo "[] All links up and running :)" |
| set -x |
| ${routecmd} |
| set +x |
| # Changement de l'état en normal |
| STATE=0 |
| echo "Switching state 1 -> 0" |
| fi # End retour etat normal |
| # if no interface is down, go to the next cycle |
| continue |
| # cas ou au moins une passerelle down mais état identique au précédent Test --> rien à changer |
| else |
| if [ "$DOWN_BAK" == "$DOWN" ]; then |
| echo "DOWN_BAK == DOWN = $DOWN" |
| continue # --> état identique test precedent --> boucle suivante |
| # cas ou au moins une passerelle down mais état différent de test précédent --> remplacement par nouvelle règle |
| else |
| cmd="ip route replace default scope global" |
| IFINDEX=1 |
| suffix="" |
| # Pour chaque interface --> traitement et application de la règle de routage |
| for iface in $WANIFACE ; do |
| echo "-------------------------" |
| echo "iface=$iface" |
| echo "Index = " $IFINDEX |
| FAILIF=0 |
| # Pour chaque interface down --> |
| echo "Interfaces DOWN = $DOWN" |
| for lnkdwn in $DOWN ; do |
| echo "LINKDOWN = "$lnkdown |
| if [ $lnkdwn -eq $IFINDEX ]; then |
| FAILIF=1 |
| break |
| else |
| continue |
| fi |
| done # End linkdown in DOWN |
| # Interface en etat normal --> rajout de la règle en mode nexthop |
| if [ $FAILIF -eq 0 ]; then |
| IP=`ifconfig $iface |grep "inet adr" |cut -f 2 -d ":" |awk '{print $1}'` |
| if [ $iface != "$EXTIF" ]; then |
| GW=`grep "$iface," $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $4}'` # @GW |
| WT=`grep "$iface," $CONF_FILE | awk -F'"' '{ print $2 }' | awk -F, '{ print $5}'` # @GW |
| else |
| GW=`grep "^GW=" $CONF_FILE | awk -F= '{print $2}'` # @GW |
| fi |
| echo "GW=$GW" |
| echo "WT=$WT" |
| echo "suffix=$sufix" |
| suffix="${suffix} nexthop via ${GW} dev ${iface} weight ${WT:-1}" |
| fi # End interface = noFAIL |
| IFINDEX=$(($IFINDEX + 1)) |
| done # End iface IN WANIFACE |
| # Commande globale |
| cmd="ip route replace default scope global $suffix" |
| |
| if [ $VERBOSE -eq 1 ]; then |
| set -x |
| # echo "Avec commentaire : " ${cmd} |
| ${cmd} |
| set +x |
| echo |
| else |
| ${cmd} 2>/dev/null |
| echo ${cmd} |
| fi # end Application de la commande de routage globale |
| fi # |
| DOWN_BAK=$DOWN # Enregistrement de l'etat |
| fi # End |
| done |
| } # End of Failover |
| |
| |
| ################# |
| # Main |
| ################# |
| |
| echo "[] Load balancer for multiple WAN interfaces - v2.1" |
| echo "[] (c) 2011 Pau Oliva Fora <pof> @eslack.org" |
| echo "[] (c) 2013 3abtux ALCASAR <3abtux> @alcasar.net" |
| echo |
| |
| case $1 in |
| create) |
| create_eth |
| ;; |
| delete) |
| delete_eth |
| ;; |
| start) |
| if [ "$MULTIWAN" != "on" ] && [ "$MULTIWAN" != "On" ]; then |
| echo "The MultiGateway is not activated !" |
| exit 0 |
| fi |
| PARAM="add" |
| create_eth |
| ip route flush cache |
| if [ $FAILOVER -eq 0 ]; then |
| echo "The MultiWAN Mode is actived but not failover connectivity !" |
| exit 0 |
| fi |
| echo "Starting down $prog: " |
| pid=`pidof -x "alcasar-load_balancing.sh"` |
| if [ $pid != "" ]; then |
| echo $pid > $pidfile |
| fi |
| touch /var/lock/subsys/alcasar-load_balancing |
| failover |
| ;; |
| stop) |
| PARAM="del" |
| echo "Shutting down $prog: " |
| if [ -f $pidfile ]; then |
| pid=`cat $pidfile` |
| kill -9 $pid |
| else |
| echo "$prog is not running." |
| exit 1 |
| fi |
| RETVAL=$? |
| echo |
| [ $RETVAL -eq 0 ] && rm -f $pidfile && rm -f /var/lock/subsys/alcasar-load_balancing |
| echo "Delete of virtual interfaces" |
| delete_eth |
| echo "Network restart" |
| service network restart 2>&1 > /dev/null |
| ip route |
| |
| ;; |
| status) |
| echo "Checking $prog : " |
| if [ -f $pidfile ]; then |
| pid=`cat $pidfile` |
| CHECK=`ps -p $pid --no-heading | awk {'printf $1'}` |
| if [ "$CHECK" = "" ]; then |
| echo "$prog is NOT running." |
| else |
| echo "$prog is running !" |
| fi |
| else |
| echo "$prog is Not running." |
| fi |
| ;; |
| fail) |
| failover |
| ;; |
| *) |
| echo "Usage: $0 [start|stop|status|create|delete]" ; echo ; exit 1 |
| ;; |
| esac |
| |
| exit 0 |
| Property changes: |
|---|
| Added: svn:eol-style |
|---|
| +LF |
|---|
| \ No newline at end of property |
|---|
| Added: svn:executable |
|---|
| +* |
|---|
| \ No newline at end of property |
|---|
| Added: svn:keywords |
|---|
| +Id Author Date |
|---|
| \ No newline at end of property |
|---|