WebSVN – ALCASAR – Diff – /scripts/alcasar-condown.sh


#!/bin/sh
 
# alcasar-condown.sh
# by Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# This script is launched after each logout
# Ce script est lancé à chaque déconnexion d'usager
 
# Debug : show all the coova parse variables. There are declared in /src/chilli.c
#echo "------------------------------------------------------------" >> /tmp/debug-condown.txt
#echo `date` >> /tmp/debug-condown.txt
#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE
#do
#	echo "$i : ${!i}" >> /tmp/debug-condown.txt
#done
 
# Remove user from his IPSET (depending on FILTER_ID)
 
#FilterID : 12345678
#1-> profile1
#2-> profile2
#3-> profile3
#4-> warn_user (if imputability report has been generated)
#6-> WL
#7-> BL
#8-> HAVP
 
if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP
then 
	set="havp"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL
then 
	set="havp_bl"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL
then 
	set="havp_wl"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
 
 
if [ -z "$set"  ] #NOT_FILTERED
then 
	set="not_filtered"
	if [ ${FILTER_ID:0:1} -eq '1' ]
	then 
		set_proto="proto_1";
	fi
 
	if [ ${FILTER_ID:1:1} -eq '1' ]
	then 
		set_proto="proto_2";
	fi
	
	if [ ${FILTER_ID:2:1} -eq '1' ]
	then 
		set_proto="proto_3";
	fi
 
	if [ -z "$set_proto"  ]
	then 
		set_proto="proto_0";
	fi
fi
 
 
ipset del $set $FRAMED_IP_ADDRESS
ipset del $set_proto $FRAMED_IP_ADDRESS
 

Rev 2069	Rev 2079
1	`#!/bin/sh`	1	`#!/bin/sh`
2		2
3	`# alcasar-condown.sh`	3	`# alcasar-condown.sh`
4	`# by Rexy`	4	`# by Rexy`
5	`# This script is distributed under the Gnu General Public License (GPL)`	5	`# This script is distributed under the Gnu General Public License (GPL)`
6		6
7	`# This script is launched after each logout`	7	`# This script is launched after each logout`
8	`# Ce script est lancé à chaque déconnexion d'usager`	8	`# Ce script est lancé à chaque déconnexion d'usager`
9		9
10	`# Debug : show all the coova parse variables. There are declared in /src/chilli.c`	10	`# Debug : show all the coova parse variables. There are declared in /src/chilli.c`
11	`#echo "------------------------------------------------------------" >> /tmp/debug-condown.txt`	11	`#echo "------------------------------------------------------------" >> /tmp/debug-condown.txt`
12	#echo `date` >> /tmp/debug-condown.txt	12	#echo `date` >> /tmp/debug-condown.txt
13	#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE	13	#for i in LAYER3 DEV NET MASK ADDR USER_NAME NAS_IP_ADDRESS SERVICE_TYPE FRAMED_IP_ADDRESS FILTER_ID STATE CLASS CUI SESSION_TIMEOUT IDLE_TIMEOUT CALLING_STATION_ID CALLED_STATION_ID NAS_ID NAS_PORT_TYPE ACCT_SESSION_ID ACCT_INTERIM_INTERVAL WISPR_LOCATION_ID WISPR_LOCATION_NAME WISPR_BANDWIDTH_MAX_UP WISPR_BANDWIDTH_MAX_DOWN WISPR-SESSION_TERMINATE_TIME CHILLISPOT_MAX_INPUT_OCTETS CHILLISPOT_MAX_OUTPUT_OCTETS CHILLISPOT_MAX_TOTAL_OCTETS INPUT_OCTETS OUTPUT_OCTETS SESSION_TIME IDLE_TIME LOCATION OLD_LOCATION TERMINATE_CAUSE
14	`#do`	14	`#do`
15	`# echo "$i : ${!i}" >> /tmp/debug-condown.txt`	15	`# echo "$i : ${!i}" >> /tmp/debug-condown.txt`
16	`#done`	16	`#done`
17		17
18	`# Remove user from his IPSET (depending on FILTER_ID)`	18	`# Remove user from his IPSET (depending on FILTER_ID)`
19		19
20	`#12345678`	20	`#FilterID : 12345678`
21	`#1-> profile1`	21	`#1-> profile1`
22	`#2-> profile2`	22	`#2-> profile2`
23	`#3-> profile3`	23	`#3-> profile3`
-		24	`#4-> warn_user (if imputability report has been generated)`
24	`#6-> WL`	25	`#6-> WL`
25	`#7-> BL`	26	`#7-> BL`
26	`#8-> HAVP`	27	`#8-> HAVP`
27		28
28	`if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP`	29	`if [ ${FILTER_ID:7:1} -eq '1' ] #HAVP`
29	`then`	30	`then`
30	`set="havp"`	31	`set="havp"`
31	`if [ ${FILTER_ID:0:1} -eq '1' ]`	32	`if [ ${FILTER_ID:0:1} -eq '1' ]`
32	`then`	33	`then`
33	`set_proto="proto_1";`	34	`set_proto="proto_1";`
34	`fi`	35	`fi`
35		36
36	`if [ ${FILTER_ID:1:1} -eq '1' ]`	37	`if [ ${FILTER_ID:1:1} -eq '1' ]`
37	`then`	38	`then`
38	`set_proto="proto_2";`	39	`set_proto="proto_2";`
39	`fi`	40	`fi`
40		41
41	`if [ ${FILTER_ID:2:1} -eq '1' ]`	42	`if [ ${FILTER_ID:2:1} -eq '1' ]`
42	`then`	43	`then`
43	`set_proto="proto_3";`	44	`set_proto="proto_3";`
44	`fi`	45	`fi`
45		46
46	`if [ -z "$set_proto" ]`	47	`if [ -z "$set_proto" ]`
47	`then`	48	`then`
48	`set_proto="proto_0";`	49	`set_proto="proto_0";`
49	`fi`	50	`fi`
50	`fi`	51	`fi`
51		52
52	`if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL`	53	`if [ ${FILTER_ID:6:1} -eq '1' ] #HAVP_BL`
53	`then`	54	`then`
54	`set="havp_bl"`	55	`set="havp_bl"`
55	`if [ ${FILTER_ID:0:1} -eq '1' ]`	56	`if [ ${FILTER_ID:0:1} -eq '1' ]`
56	`then`	57	`then`
57	`set_proto="proto_1";`	58	`set_proto="proto_1";`
58	`fi`	59	`fi`
59		60
60	`if [ ${FILTER_ID:1:1} -eq '1' ]`	61	`if [ ${FILTER_ID:1:1} -eq '1' ]`
61	`then`	62	`then`
62	`set_proto="proto_2";`	63	`set_proto="proto_2";`
63	`fi`	64	`fi`
64		65
65	`if [ ${FILTER_ID:2:1} -eq '1' ]`	66	`if [ ${FILTER_ID:2:1} -eq '1' ]`
66	`then`	67	`then`
67	`set_proto="proto_3";`	68	`set_proto="proto_3";`
68	`fi`	69	`fi`
69		70
70	`if [ -z "$set_proto" ]`	71	`if [ -z "$set_proto" ]`
71	`then`	72	`then`
72	`set_proto="proto_0";`	73	`set_proto="proto_0";`
73	`fi`	74	`fi`
74	`fi`	75	`fi`
75		76
76	`if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL`	77	`if [ ${FILTER_ID:5:1} -eq '1' ] #HAVP_WL`
77	`then`	78	`then`
78	`set="havp_wl"`	79	`set="havp_wl"`
79	`if [ ${FILTER_ID:0:1} -eq '1' ]`	80	`if [ ${FILTER_ID:0:1} -eq '1' ]`
80	`then`	81	`then`
81	`set_proto="proto_1";`	82	`set_proto="proto_1";`
82	`fi`	83	`fi`
83		84
84	`if [ ${FILTER_ID:1:1} -eq '1' ]`	85	`if [ ${FILTER_ID:1:1} -eq '1' ]`
85	`then`	86	`then`
86	`set_proto="proto_2";`	87	`set_proto="proto_2";`
87	`fi`	88	`fi`
88		89
89	`if [ ${FILTER_ID:2:1} -eq '1' ]`	90	`if [ ${FILTER_ID:2:1} -eq '1' ]`
90	`then`	91	`then`
91	`set_proto="proto_3";`	92	`set_proto="proto_3";`
92	`fi`	93	`fi`
93		94
94	`if [ -z "$set_proto" ]`	95	`if [ -z "$set_proto" ]`
95	`then`	96	`then`
96	`set_proto="proto_0";`	97	`set_proto="proto_0";`
97	`fi`	98	`fi`
98	`fi`	99	`fi`
99		100
100		101
101		102
102	`if [ -z "$set" ] #NOT_FILTERED`	103	`if [ -z "$set" ] #NOT_FILTERED`
103	`then`	104	`then`
104	`set="not_filtered"`	105	`set="not_filtered"`
105	`if [ ${FILTER_ID:0:1} -eq '1' ]`	106	`if [ ${FILTER_ID:0:1} -eq '1' ]`
106	`then`	107	`then`
107	`set_proto="proto_1";`	108	`set_proto="proto_1";`
108	`fi`	109	`fi`
109		110
110	`if [ ${FILTER_ID:1:1} -eq '1' ]`	111	`if [ ${FILTER_ID:1:1} -eq '1' ]`
111	`then`	112	`then`
112	`set_proto="proto_2";`	113	`set_proto="proto_2";`
113	`fi`	114	`fi`
114		115
115	`if [ ${FILTER_ID:2:1} -eq '1' ]`	116	`if [ ${FILTER_ID:2:1} -eq '1' ]`
116	`then`	117	`then`
117	`set_proto="proto_3";`	118	`set_proto="proto_3";`
118	`fi`	119	`fi`
119		120
120	`if [ -z "$set_proto" ]`	121	`if [ -z "$set_proto" ]`
121	`then`	122	`then`
122	`set_proto="proto_0";`	123	`set_proto="proto_0";`
123	`fi`	124	`fi`
124	`fi`	125	`fi`
125		126
126		127
127	`ipset del $set $FRAMED_IP_ADDRESS`	128	`ipset del $set $FRAMED_IP_ADDRESS`
128	`ipset del $set_proto $FRAMED_IP_ADDRESS`	129	`ipset del $set_proto $FRAMED_IP_ADDRESS`
129		130

Subversion Repositories ALCASAR

(root)/scripts/alcasar-condown.sh – Rev 2069 → 2079