WebSVN – ALCASAR – Diff – /scripts/alcasar-rpm.sh


#!/bin/bash
 
# alcasar-rpm.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# script de mise en place des dépots RPM + installation des RPM complémentaires
# configure the RPM repository + complementary RPM installation
 
Lang=`echo $LANG|cut -c 1-2`
SED="/bin/sed -i"
VERSION="7"
ARCH="x86_64"
# The kernel version we compile netflow for
KERNEL="kernel-server-5.10.46-1.mga7-1-1.mga7"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
# (old) perl-Socket6 : needed by nfsen
# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf
# "lsscsi" & nvme-cli" : needed by phpsysinfo
# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")
# "sudo" : needed after a reinstallation (to be investigated)
# "clamav" + "clamav-db" : needed because of a lack of mutual dependance
# "postfix" + "cyrus-sasl" : email registration method
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl"
 
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}
 
rpm_error ()
{
echo
if [ $Lang == "fr" ]
then
	echo "Relancez l'installation ultérieurement."
	echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"
else
	echo "Try an other install later."
	echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"
fi
}
 
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
	if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
	then
		DISTRIBUTION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
	then
		CURRENT_VERSION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
	then
		ARCH=`echo $i|cut -d"=" -f2`
	fi
done
IFS="$old"
 
# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm
 
# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
MIRROR_NBR=3
#                       For French
MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"
#                       For Europeans
MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"
#                       For everybody
MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
try_nb="0"; nb_repository="0"
while [ "$nb_repository" != "4" ]
do
	try_nb=`expr $try_nb + 1`
	MIRRORLIST="MIRRORLIST$try_nb"
	rpm_repository_sync
	nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
	if [ "$nb_repository" != "4" ]
	then
		if [ $Lang == "fr" ]
		then
			echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
		else
			echo "An error occurs when synchronising the repositories N°$try_nb"
		fi
		if [ $(expr $try_nb) -eq $MIRROR_NBR ]
		then
			rpm_error
			exit 1
		fi
		if [ $Lang == "fr" ]
		then
			echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"
		else
			echo "Do you want to try a synchronisation with an other repository? (Y/n)"
		fi
		response=0
		PTN='^[oOnNyY]?$'
		until [[ "$response" =~ $PTN ]]
		do
			read response
		done
		if [ "$response" = "n" ] || [ "$response" = "N" ]
		then
			exit 1
		fi
	fi
done
# download the kernel used by ALCASAR
if [ $Lang == "fr" ]
then
	echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
	echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
# Remove some RPMs in order to avoid error (or automatic update of "home made" RPM)
urpme wkhtmltopdf freeradius-ldap
# At this time, only skip Kernel update
echo "/^kernel/" > /etc/urpmi/skip.list
if [ `egrep '^exclude=' /etc/dnf/dnf.conf |wc -l` -eq "1" ]; then
	$SED "s?^exclude=.*?exclude=kernel\*?g" /etc/dnf/dnf.conf
else
	echo "exclude=kernel*" >> /etc/dnf/dnf.conf
fi
# download updated RPM in cache
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
	echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
	echo "Updated RPM download. Please wait ..."
	echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages."
	else
		echo "An error occurs when downloading RPMS"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la mise à jour des paquetages."
	else
		echo "An error occurs when updating packages"
	fi
	rpm_error
	exit 1
fi
# Clean the RPM cache
urpmi --clean
 
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then
	echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
	echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
	else
		echo "An error occurs when downloading complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --no-recommends $PACKAGES
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then
		echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
	else
		echo "An error occurs when installing complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
	if [ $i != $KERNEL ];then
		urpme --auto $i
	fi
done
# delete unused RPMs
if [ $Lang == "fr" ]
then
	echo "Cleaning the system : "
else
	echo "Nettoyage du système : "
fi
unused_rpm="shorewall mandi plymouth squid polkit"
/usr/sbin/urpme --auto -a $unused_rpm
/usr/sbin/urpme --auto --auto-orphans
 
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
for pkg in `ls rpms/$ARCH/*.rpm`
do
    urpmi --no-verify --auto $pkg
done
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)
/sbin/depmod -a 2>/dev/null
# test if all needed rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in $PACKAGES
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
# test if all custom rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in `ls rpms/$ARCH/|sed 's/.x86_64.rpm//'`
do
	nb_pkg=`expr $nb_pkg + 1`
	if rpm -q --quiet $pkg ; then
		count_pkg=`expr $count_pkg + 1`
	else
		echo "error installing $pkg"
	fi
done
if [ $count_pkg -ne $nb_pkg ]
then
	exit 1
fi
exit 0
 

Rev 2988	Rev 2990
1	`#!/bin/bash`	1	`#!/bin/bash`
2		2
3	`# alcasar-rpm.sh`	3	`# alcasar-rpm.sh`
4	`# by 3abtux and Rexy`	4	`# by 3abtux and Rexy`
5	`# This script is distributed under the Gnu General Public License (GPL)`	5	`# This script is distributed under the Gnu General Public License (GPL)`
6		6
7	`# script de mise en place des dépots RPM`	7	`# script de mise en place des dépots RPM + installation des RPM complémentaires`
8	`# configure the RPM repository`	8	`# configure the RPM repository + complementary RPM installation`
9		9
10	Lang=`echo $LANG\|cut -c 1-2`	10	Lang=`echo $LANG\|cut -c 1-2`
11	`SED="/bin/sed -i"`	11	`SED="/bin/sed -i"`
12	`VERSION="7"`	12	`VERSION="7"`
13	`ARCH="x86_64"`	13	`ARCH="x86_64"`
14	`# The kernel version we compile netflow for`	14	`# The kernel version we compile netflow for`
15	`KERNEL="kernel-server-5.10.46-1.mga7-1-1.mga7"`	15	`KERNEL="kernel-server-5.10.46-1.mga7-1-1.mga7"`
16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`	16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`
17	`# (old) perl-Socket6 : needed by nfsen`	17	`# (old) perl-Socket6 : needed by nfsen`
18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`	18	`# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf`
19	`# "lsscsi" & nvme-cli" : needed by phpsysinfo`	19	`# "lsscsi" & nvme-cli" : needed by phpsysinfo`
20	`# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")`	20	`# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")`
21	`# "sudo" : needed after a reinstallation (to be investigated)`	21	`# "sudo" : needed after a reinstallation (to be investigated)`
22	`# "clamav + clamav-db" : needed because of a lack of mutual dependance`	22	`# "clamav" + "clamav-db" : needed because of a lack of mutual dependance`
-		23	`# "postfix" + "cyrus-sasl" : email registration method`
23	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat"	24	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli unbound e2guardian postfix mariadb ntp bind-utils openssh-server rng-utils rsync clamav clamav-db clamd fail2ban gnupg2 ulogd pm-fallback-policy ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware-nonfree dnsmasq dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl"
24		25
25	`rpm_repository_sync ()`	26	`rpm_repository_sync ()`
26	`{`	27	`{`
27	`cat <<EOF > /etc/urpmi/urpmi.cfg`	28	`cat <<EOF > /etc/urpmi/urpmi.cfg`
28	`{`	29	`{`
29	`downloader: wget`	30	`downloader: wget`
30	`}`	31	`}`
31	`EOF`	32	`EOF`
32	`echo ${!MIRRORLIST}`	33	`echo ${!MIRRORLIST}`
33	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`	34	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`
34	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`	35	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`
35	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`	36	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`
36	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`	37	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`
37	`}`	38	`}`
38		39
39	`rpm_error ()`	40	`rpm_error ()`
40	`{`	41	`{`
41	`echo`	42	`echo`
42	`if [ $Lang == "fr" ]`	43	`if [ $Lang == "fr" ]`
43	`then`	44	`then`
44	`echo "Relancez l'installation ultérieurement."`	45	`echo "Relancez l'installation ultérieurement."`
45	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"`	46	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"`
46	`else`	47	`else`
47	`echo "Try an other install later."`	48	`echo "Try an other install later."`
48	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"`	49	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"`
49	`fi`	50	`fi`
50	`}`	51	`}`
51		52
52	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	53	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
53	fic=`cat /etc/product.id`	54	fic=`cat /etc/product.id`
54	`old="$IFS"`	55	`old="$IFS"`
55	`IFS=","`	56	`IFS=","`
56	`set $fic`	57	`set $fic`
57	`for i in $*`	58	`for i in $*`
58	`do`	59	`do`
59	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	60	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
60	`then`	61	`then`
61	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	62	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
62	`fi`	63	`fi`
63	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	64	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
64	`then`	65	`then`
65	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	66	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
66	`fi`	67	`fi`
67	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	68	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
68	`then`	69	`then`
69	ARCH=`echo $i\|cut -d"=" -f2`	70	ARCH=`echo $i\|cut -d"=" -f2`
70	`fi`	71	`fi`
71	`done`	72	`done`
72	`IFS="$old"`	73	`IFS="$old"`
73		74
74	`# We prefer wget than curl`	75	`# We prefer wget than curl`
75	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`	76	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`
76		77
77	`# Set the RPM repository (if not already set)`	78	`# Set the RPM repository (if not already set)`
78	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`	79	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`
79	`MIRROR_NBR=2`	80	`MIRROR_NBR=3`
-		81	`# For French`
-		82	`MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"`
80	`# For Europeans`	83	`# For Europeans`
81	`MIRRORLIST1="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`	84	`MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"`
82	`# For International install`	85	`# For everybody`
83	`MIRRORLIST2="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`	86	`MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`
84	`try_nb="0"; nb_repository="0"`	87	`try_nb="0"; nb_repository="0"`
85	`while [ "$nb_repository" != "4" ]`	88	`while [ "$nb_repository" != "4" ]`
86	`do`	89	`do`
87	try_nb=`expr $try_nb + 1`	90	try_nb=`expr $try_nb + 1`
88	`MIRRORLIST="MIRRORLIST$try_nb"`	91	`MIRRORLIST="MIRRORLIST$try_nb"`
89	`rpm_repository_sync`	92	`rpm_repository_sync`
90	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`	93	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`
91	`if [ "$nb_repository" != "4" ]`	94	`if [ "$nb_repository" != "4" ]`
92	`then`	95	`then`
93	`if [ $Lang == "fr" ]`	96	`if [ $Lang == "fr" ]`
94	`then`	97	`then`
95	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`	98	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`
96	`else`	99	`else`
97	`echo "An error occurs when synchronising the repositories N°$try_nb"`	100	`echo "An error occurs when synchronising the repositories N°$try_nb"`
98	`fi`	101	`fi`
99	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`	102	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`
100	`then`	103	`then`
101	`rpm_error`	104	`rpm_error`
102	`exit 1`	105	`exit 1`
103	`fi`	106	`fi`
104	`if [ $Lang == "fr" ]`	107	`if [ $Lang == "fr" ]`
105	`then`	108	`then`
106	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`	109	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"`
107	`else`	110	`else`
108	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`	111	`echo "Do you want to try a synchronisation with an other repository? (Y/n)"`
109	`fi`	112	`fi`
110	`response=0`	113	`response=0`
111	`PTN='^[oOnNyY]?$'`	114	`PTN='^[oOnNyY]?$'`
112	`until [[ "$response" =~ $PTN ]]`	115	`until [[ "$response" =~ $PTN ]]`
113	`do`	116	`do`
114	`read response`	117	`read response`
115	`done`	118	`done`
116	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	119	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
117	`then`	120	`then`
118	`exit 1`	121	`exit 1`
119	`fi`	122	`fi`
120	`fi`	123	`fi`
121	`done`	124	`done`
122	`# download the kernel used by ALCASAR`	125	`# download the kernel used by ALCASAR`
123	`if [ $Lang == "fr" ]`	126	`if [ $Lang == "fr" ]`
124	`then`	127	`then`
125	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`	128	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`
126	`else`	129	`else`
127	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`	130	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`
128	`fi`	131	`fi`
129	`urpmi --auto --quiet $KERNEL`	132	`urpmi --auto --quiet $KERNEL`
130	`# Remove some RPMs in order to avoid error (or automatic update of "home made" RPM)`	133	`# Remove some RPMs in order to avoid error (or automatic update of "home made" RPM)`
131	`urpme wkhtmltopdf freeradius-ldap`	134	`urpme wkhtmltopdf freeradius-ldap`
132	`# At this time, only skip Kernel update`	135	`# At this time, only skip Kernel update`
133	`echo "/^kernel/" > /etc/urpmi/skip.list`	136	`echo "/^kernel/" > /etc/urpmi/skip.list`
134	if [ `egrep '^exclude=' /etc/dnf/dnf.conf \|wc -l` -eq "1" ]; then	137	if [ `egrep '^exclude=' /etc/dnf/dnf.conf \|wc -l` -eq "1" ]; then
135	`$SED "s?^exclude=.?exclude=kernel\?g" /etc/dnf/dnf.conf`	138	`$SED "s?^exclude=.?exclude=kernel\?g" /etc/dnf/dnf.conf`
136	`else`	139	`else`
137	`echo "exclude=kernel*" >> /etc/dnf/dnf.conf`	140	`echo "exclude=kernel*" >> /etc/dnf/dnf.conf`
138	`fi`	141	`fi`
139	`# download updated RPM in cache`	142	`# download updated RPM in cache`
140	`if [ $Lang == "fr" ]`	143	`if [ $Lang == "fr" ]`
141	`then`	144	`then`
142	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`	145	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`
143	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`	146	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`
144	`else`	147	`else`
145	`echo "Updated RPM download. Please wait ..."`	148	`echo "Updated RPM download. Please wait ..."`
146	`echo "You should now take a coffe (or a good beer) ;-)"`	149	`echo "You should now take a coffe (or a good beer) ;-)"`
147	`fi`	150	`fi`
148	`urpmi --auto --auto-update --quiet --test --retry 2`	151	`urpmi --auto --auto-update --quiet --test --retry 2`
149	`if [ "$?" != "0" ]`	152	`if [ "$?" != "0" ]`
150	`then`	153	`then`
151	`echo`	154	`echo`
152	`if [ $Lang == "fr" ]`	155	`if [ $Lang == "fr" ]`
153	`then`	156	`then`
154	`echo "Une erreur a été détectée lors de la récupération des paquetages."`	157	`echo "Une erreur a été détectée lors de la récupération des paquetages."`
155	`else`	158	`else`
156	`echo "An error occurs when downloading RPMS"`	159	`echo "An error occurs when downloading RPMS"`
157	`fi`	160	`fi`
158	`rpm_error`	161	`rpm_error`
159	`exit 1`	162	`exit 1`
160	`fi`	163	`fi`
161		164
162	`# update with cached RPM`	165	`# update with cached RPM`
163	`urpmi --auto --auto-update`	166	`urpmi --auto --auto-update`
164	`if [ "$?" != "0" ]`	167	`if [ "$?" != "0" ]`
165	`then`	168	`then`
166	`echo`	169	`echo`
167	`if [ $Lang == "fr" ]`	170	`if [ $Lang == "fr" ]`
168	`then`	171	`then`
169	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`	172	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`
170	`else`	173	`else`
171	`echo "An error occurs when updating packages"`	174	`echo "An error occurs when updating packages"`
172	`fi`	175	`fi`
173	`rpm_error`	176	`rpm_error`
174	`exit 1`	177	`exit 1`
175	`fi`	178	`fi`
176	`# Clean the RPM cache`	179	`# Clean the RPM cache`
177	`urpmi --clean`	180	`urpmi --clean`
178		181
179	`# Download of ALCASAR specifics RPM in cache (and test)`	182	`# Download of ALCASAR specifics RPM in cache (and test)`
180	`if [ $Lang == "fr" ]`	183	`if [ $Lang == "fr" ]`
181	`then`	184	`then`
182	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`	185	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`
183	`else`	186	`else`
184	`echo "Download of complementary packages. Please wait ..."`	187	`echo "Download of complementary packages. Please wait ..."`
185	`fi`	188	`fi`
186	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`	189	`urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2`
187	`if [ "$?" != "0" ]`	190	`if [ "$?" != "0" ]`
188	`then`	191	`then`
189	`echo`	192	`echo`
190	`if [ $Lang == "fr" ]`	193	`if [ $Lang == "fr" ]`
191	`then`	194	`then`
192	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`	195	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`
193	`else`	196	`else`
194	`echo "An error occurs when downloading complementary packages"`	197	`echo "An error occurs when downloading complementary packages"`
195	`fi`	198	`fi`
196	`rpm_error`	199	`rpm_error`
197	`exit 1`	200	`exit 1`
198	`fi`	201	`fi`
199		202
200	`# update with cached RPM`	203	`# update with cached RPM`
201	`urpmi --auto --no-recommends $PACKAGES`	204	`urpmi --auto --no-recommends $PACKAGES`
202	`if [ "$?" != "0" ]`	205	`if [ "$?" != "0" ]`
203	`then`	206	`then`
204	`echo`	207	`echo`
205	`if [ $Lang == "fr" ]`	208	`if [ $Lang == "fr" ]`
206	`then`	209	`then`
207	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`	210	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`
208	`else`	211	`else`
209	`echo "An error occurs when installing complementary packages"`	212	`echo "An error occurs when installing complementary packages"`
210	`fi`	213	`fi`
211	`rpm_error`	214	`rpm_error`
212	`exit 1`	215	`exit 1`
213	`fi`	216	`fi`
214		217
215	`# Keep only the kernel version we compil netflow with, and remove all others`	218	`# Keep only the kernel version we compil netflow with, and remove all others`
216	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`	219	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`
217	`for i in $kernelVersion`	220	`for i in $kernelVersion`
218	`do`	221	`do`
219	`if [ $i != $KERNEL ];then`	222	`if [ $i != $KERNEL ];then`
220	`urpme --auto $i`	223	`urpme --auto $i`
221	`fi`	224	`fi`
222	`done`	225	`done`
223	`# delete unused RPMs`	226	`# delete unused RPMs`
224	`if [ $Lang == "fr" ]`	227	`if [ $Lang == "fr" ]`
225	`then`	228	`then`
226	`echo "Cleaning the system : "`	229	`echo "Cleaning the system : "`
227	`else`	230	`else`
228	`echo "Nettoyage du système : "`	231	`echo "Nettoyage du système : "`
229	`fi`	232	`fi`
230	`unused_rpm="shorewall mandi plymouth squid polkit"`	233	`unused_rpm="shorewall mandi plymouth squid polkit"`
231	`/usr/sbin/urpme --auto -a $unused_rpm`	234	`/usr/sbin/urpme --auto -a $unused_rpm`
232	`/usr/sbin/urpme --auto --auto-orphans`	235	`/usr/sbin/urpme --auto --auto-orphans`
233		236
234	`# Save chilli launch script (erase with new rpm one)`	237	`# Save chilli launch script (erase with new rpm one)`
235	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`	238	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`
236	`# Install home made RPMs`	239	`# Install home made RPMs`
237	for pkg in `ls rpms/$ARCH/*.rpm`	240	for pkg in `ls rpms/$ARCH/*.rpm`
238	`do`	241	`do`
239	`urpmi --no-verify --auto $pkg`	242	`urpmi --no-verify --auto $pkg`
240	`done`	243	`done`
241	`# restore chilli launch script`	244	`# restore chilli launch script`
242	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`	245	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`
243	`# Clean the RPM cache`	246	`# Clean the RPM cache`
244	`urpmi --clean`	247	`urpmi --clean`
245	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`	248	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)`
246	`/sbin/depmod -a 2>/dev/null`	249	`/sbin/depmod -a 2>/dev/null`
247	`# test if all needed rpms are correctly installed`	250	`# test if all needed rpms are correctly installed`
248	`count_pkg=0; nb_pkg=0;`	251	`count_pkg=0; nb_pkg=0;`
249	`for pkg in $PACKAGES`	252	`for pkg in $PACKAGES`
250	`do`	253	`do`
251	nb_pkg=`expr $nb_pkg + 1`	254	nb_pkg=`expr $nb_pkg + 1`
252	`if rpm -q --quiet $pkg ; then`	255	`if rpm -q --quiet $pkg ; then`
253	count_pkg=`expr $count_pkg + 1`	256	count_pkg=`expr $count_pkg + 1`
254	`else`	257	`else`
255	`echo "error installing $pkg"`	258	`echo "error installing $pkg"`
256	`fi`	259	`fi`
257	`done`	260	`done`
258	`if [ $count_pkg -ne $nb_pkg ]`	261	`if [ $count_pkg -ne $nb_pkg ]`
259	`then`	262	`then`
260	`exit 1`	263	`exit 1`
261	`fi`	264	`fi`
262	`# test if all custom rpms are correctly installed`	265	`# test if all custom rpms are correctly installed`
263	`count_pkg=0; nb_pkg=0;`	266	`count_pkg=0; nb_pkg=0;`
264	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`	267	for pkg in `ls rpms/$ARCH/\|sed 's/.x86_64.rpm//'`
265	`do`	268	`do`
266	nb_pkg=`expr $nb_pkg + 1`	269	nb_pkg=`expr $nb_pkg + 1`
267	`if rpm -q --quiet $pkg ; then`	270	`if rpm -q --quiet $pkg ; then`
268	count_pkg=`expr $count_pkg + 1`	271	count_pkg=`expr $count_pkg + 1`
269	`else`	272	`else`
270	`echo "error installing $pkg"`	273	`echo "error installing $pkg"`
271	`fi`	274	`fi`
272	`done`	275	`done`
273	`if [ $count_pkg -ne $nb_pkg ]`	276	`if [ $count_pkg -ne $nb_pkg ]`
274	`then`	277	`then`
275	`exit 1`	278	`exit 1`
276	`fi`	279	`fi`
277	`exit 0`	280	`exit 0`
278		281

Subversion Repositories ALCASAR

(root)/scripts/alcasar-rpm.sh – Rev 2988 → 2990