WebSVN – ALCASAR – Diff – /scripts/alcasar-urpmi.sh


#!/bin/bash
# $Id: alcasar-urpmi.sh 1799 2016-02-28 12:15:23Z richard $
 
# alcasar-urpmi.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# script de mise en place des dépots RPM 
# configure the RPM repository
 
Lang=`echo $LANG|cut -c 1-2`
VERSION="5"
ARCH="i586" 
# The kernel version we compile netflow for
KERNEL="kernel-server-4.1.15-2.mga5-1-1.mga5"
ModuleTree="kernel-server-4.1.15-2.mga5"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap freeradius-web apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop"
 
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
}
 
rpm_error ()
{
echo
if [ $Lang == "fr" ]
then	
	echo "Relancez l'installation ultérieurement."
	echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"
else
	echo "Try an other install later."
	echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"
fi
}
 
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
	if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
	then 
		DISTRIBUTION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
	then 
		CURRENT_VERSION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
	then 
		ARCH=`echo $i|cut -d"=" -f2`
	fi
done
IFS="$old"
 
# We prefer wget than curl
urpmi --no-verify-rpm --auto conf/rpms/$ARCH/wget*.rpm
 
# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
if [ "$ACTIVE_REPO" != "2" ]
	then
	MIRROR_NBR=2
	#                       For Europeans 
	MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"
	#                       For International install
	MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
	try_nb="0"; nb_repository="0"
	while [ "$nb_repository" != "2" ]
	do
		try_nb=`expr $try_nb + 1`
		MIRRORLIST="MIRRORLIST$try_nb"
		rpm_repository_sync 
		nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
		if [ "$nb_repository" != "2" ]
		then
			if [ $Lang == "fr" ]
			then	
				echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
			else
				echo "An error occurs when synchronising the repositories N°$try_nb"
			fi
			if [ $(expr $try_nb) -eq $MIRROR_NBR ]
			then
				rpm_error
				exit 1
			fi
			if [ $Lang == "fr" ]
			then	
				echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"
			else
				echo "Do you wan't to try a synchronisation with an other repository?"
			fi
			response=0
			PTN='^[oOnNyY]$'
			until [[ $(expr $response : $PTN) -gt 0 ]]
			do
				read response
			done
			if [ "$response" = "n" ] || [ "$response" = "N" ] 
			then
			exit 1
			fi
		fi
	done
fi
 
# download the kernel used by ALCASAR and fix its version
if [ $Lang == "fr" ]
then	
	echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
	echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
echo "/^kernel/" > /etc/urpmi/skip.list
 
# download updated RPM in cache 
if [ $Lang == "fr" ]
then	
	echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
	echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
	echo "Updated RPM download. Please wait ..."
	echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la récupération des paquetages."
	else
		echo "An error occurs when downloading RPMS"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la mise à jour des paquetages."
	else
		echo "An error occurs when updating packages"
	fi
	rpm_error
	exit 1
fi
# Clean the RPM cache
urpmi --clean
 
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then	
	echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
	echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
	else
		echo "An error occurs when downloading complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto $PACKAGES 
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
	else
		echo "An error occurs when installing complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep "^kernel-")
for i in $kernelVersion
do
	if [ ! $i = $KERNEL ];then
		urpme --auto $i
	fi
done
 
# delete unused RPMs
if [ $Lang == "fr" ]
then
	echo "Cleaning the system : "
else
	echo "Nettoyage du système : "
fi
for rm_rpm in shorewall mandi avahi mageia-gfxboot-theme privoxy cpupower squid gamin
do
	/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null
	echo -n "."
done
 
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
urpmi --no-verify --auto conf/rpms/$ARCH/*.rpm
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
exit 0
 

Rev 1785	Rev 1799
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`# $Id: alcasar-urpmi.sh 1785 2016-01-22 19:56:39Z richard $`	2	`# $Id: alcasar-urpmi.sh 1799 2016-02-28 12:15:23Z richard $`
3		3
4	`# alcasar-urpmi.sh`	4	`# alcasar-urpmi.sh`
5	`# by 3abtux and Rexy`	5	`# by 3abtux and Rexy`
6	`# This script is distributed under the Gnu General Public License (GPL)`	6	`# This script is distributed under the Gnu General Public License (GPL)`
7		7
8	`# script de mise en place des dépots RPM`	8	`# script de mise en place des dépots RPM`
9	`# configure the RPM repository`	9	`# configure the RPM repository`
10		10
11	Lang=`echo $LANG\|cut -c 1-2`	11	Lang=`echo $LANG\|cut -c 1-2`
12	`VERSION="5"`	12	`VERSION="5"`
13	`ARCH="i586"`	13	`ARCH="i586"`
-		14	`# The kernel version we compile netflow for`
-		15	`KERNEL="kernel-server-4.1.15-2.mga5-1-1.mga5"`
-		16	`ModuleTree="kernel-server-4.1.15-2.mga5"`
14	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`	17	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`
15	PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap freeradius-web apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd dkms-ipt_NETFLOW iptables-NETFLOW pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop"	18	`PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap freeradius-web apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop"`
16		19
17	`rpm_repository_sync ()`	20	`rpm_repository_sync ()`
18	`{`	21	`{`
19	`cat <<EOF > /etc/urpmi/urpmi.cfg`	22	`cat <<EOF > /etc/urpmi/urpmi.cfg`
20	`{`	23	`{`
21	`downloader: wget`	24	`downloader: wget`
22	`}`	25	`}`
23	`EOF`	26	`EOF`
24	`echo ${!MIRRORLIST}`	27	`echo ${!MIRRORLIST}`
25	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`	28	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`
26	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`	29	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`
27	`}`	30	`}`
28		31
29	`rpm_error ()`	32	`rpm_error ()`
30	`{`	33	`{`
31	`echo`	34	`echo`
32	`if [ $Lang == "fr" ]`	35	`if [ $Lang == "fr" ]`
33	`then`	36	`then`
34	`echo "Relancez l'installation ultérieurement."`	37	`echo "Relancez l'installation ultérieurement."`
35	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`	38	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`
36	`else`	39	`else`
37	`echo "Try an other install later."`	40	`echo "Try an other install later."`
38	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`	41	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`
39	`fi`	42	`fi`
40	`}`	43	`}`
-		44
41	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	45	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
42	fic=`cat /etc/product.id`	46	fic=`cat /etc/product.id`
43	`old="$IFS"`	47	`old="$IFS"`
44	`IFS=","`	48	`IFS=","`
45	`set $fic`	49	`set $fic`
46	`for i in $*`	50	`for i in $*`
47	`do`	51	`do`
48	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	52	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
49	`then`	53	`then`
50	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	54	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
51	`fi`	55	`fi`
52	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	56	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
53	`then`	57	`then`
54	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	58	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
55	`fi`	59	`fi`
56	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	60	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
57	`then`	61	`then`
58	ARCH=`echo $i\|cut -d"=" -f2`	62	ARCH=`echo $i\|cut -d"=" -f2`
59	`fi`	63	`fi`
60	`done`	64	`done`
61	`IFS="$old"`	65	`IFS="$old"`
-		66
62	`# We prefer wget than curl`	67	`# We prefer wget than curl`
63	`urpmi --no-verify-rpm --auto conf/rpms/$ARCH/wget*.rpm`	68	`urpmi --no-verify-rpm --auto conf/rpms/$ARCH/wget*.rpm`
-		69
64	`# Set the RPM repository (if not already set)`	70	`# Set the RPM repository (if not already set)`
65	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`	71	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`
66	`if [ "$ACTIVE_REPO" != "2" ]`	72	`if [ "$ACTIVE_REPO" != "2" ]`
67	`then`	73	`then`
68	`MIRROR_NBR=2`	74	`MIRROR_NBR=2`
69	`# For Europeans`	75	`# For Europeans`
70	`MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"`	76	`MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"`
71	`# For International install`	77	`# For International install`
72	`MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`	78	`MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`
73	`try_nb="0"; nb_repository="0"`	79	`try_nb="0"; nb_repository="0"`
74	`while [ "$nb_repository" != "2" ]`	80	`while [ "$nb_repository" != "2" ]`
75	`do`	81	`do`
76	try_nb=`expr $try_nb + 1`	82	try_nb=`expr $try_nb + 1`
77	`MIRRORLIST="MIRRORLIST$try_nb"`	83	`MIRRORLIST="MIRRORLIST$try_nb"`
78	`rpm_repository_sync`	84	`rpm_repository_sync`
79	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`	85	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`
80	`if [ "$nb_repository" != "2" ]`	86	`if [ "$nb_repository" != "2" ]`
81	`then`	87	`then`
82	`if [ $Lang == "fr" ]`	88	`if [ $Lang == "fr" ]`
83	`then`	89	`then`
84	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`	90	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`
85	`else`	91	`else`
86	`echo "An error occurs when synchronising the repositories N°$try_nb"`	92	`echo "An error occurs when synchronising the repositories N°$try_nb"`
87	`fi`	93	`fi`
88	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`	94	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`
89	`then`	95	`then`
90	`rpm_error`	96	`rpm_error`
91	`exit 1`	97	`exit 1`
92	`fi`	98	`fi`
93	`if [ $Lang == "fr" ]`	99	`if [ $Lang == "fr" ]`
94	`then`	100	`then`
95	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"`	101	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"`
96	`else`	102	`else`
97	`echo "Do you wan't to try a synchronisation with an other repository?"`	103	`echo "Do you wan't to try a synchronisation with an other repository?"`
98	`fi`	104	`fi`
99	`response=0`	105	`response=0`
100	`PTN='^[oOnNyY]$'`	106	`PTN='^[oOnNyY]$'`
101	`until [[ $(expr $response : $PTN) -gt 0 ]]`	107	`until [[ $(expr $response : $PTN) -gt 0 ]]`
102	`do`	108	`do`
103	`read response`	109	`read response`
104	`done`	110	`done`
105	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	111	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
106	`then`	112	`then`
107	`exit 1`	113	`exit 1`
108	`fi`	114	`fi`
109	`fi`	115	`fi`
110	`done`	116	`done`
111	`fi`	117	`fi`
-		118
-		119	`# download the kernel used by ALCASAR and fix its version`
-		120	`if [ $Lang == "fr" ]`
-		121	`then`
-		122	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`
-		123	`else`
-		124	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`
-		125	`fi`
-		126	`urpmi --auto --quiet $KERNEL`
-		127	`echo "/^kernel/" > /etc/urpmi/skip.list`
-		128
112	`# download updated RPM in cache`	129	`# download updated RPM in cache`
113	`if [ $Lang == "fr" ]`	130	`if [ $Lang == "fr" ]`
114	`then`	131	`then`
115	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`	132	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`
116	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`	133	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`
117	`else`	134	`else`
118	`echo "Updated RPM download. Please wait ..."`	135	`echo "Updated RPM download. Please wait ..."`
119	`echo "You should now take a coffe (or a good beer) ;-)"`	136	`echo "You should now take a coffe (or a good beer) ;-)"`
120	`fi`	137	`fi`
121	`urpmi --auto --auto-update --quiet --test --retry 2`	138	`urpmi --auto --auto-update --quiet --test --retry 2`
122	`if [ "$?" != "0" ]`	139	`if [ "$?" != "0" ]`
123	`then`	140	`then`
124	`echo`	141	`echo`
125	`if [ $Lang == "fr" ]`	142	`if [ $Lang == "fr" ]`
126	`then`	143	`then`
127	`echo "Une erreur a été détectée lors de la récupération des paquetages."`	144	`echo "Une erreur a été détectée lors de la récupération des paquetages."`
128	`else`	145	`else`
129	`echo "An error occurs when downloading RPMS"`	146	`echo "An error occurs when downloading RPMS"`
130	`fi`	147	`fi`
131	`rpm_error`	148	`rpm_error`
132	`exit 1`	149	`exit 1`
133	`fi`	150	`fi`
-		151
134	`# update with cached RPM`	152	`# update with cached RPM`
135	`urpmi --auto --auto-update`	153	`urpmi --auto --auto-update`
136	`if [ "$?" != "0" ]`	154	`if [ "$?" != "0" ]`
137	`then`	155	`then`
138	`echo`	156	`echo`
139	`if [ $Lang == "fr" ]`	157	`if [ $Lang == "fr" ]`
140	`then`	158	`then`
141	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`	159	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`
142	`else`	160	`else`
143	`echo "An error occurs when updating packages"`	161	`echo "An error occurs when updating packages"`
144	`fi`	162	`fi`
145	`rpm_error`	163	`rpm_error`
146	`exit 1`	164	`exit 1`
147	`fi`	165	`fi`
148	`# Clean the RPM cache`	166	`# Clean the RPM cache`
149	`urpmi --clean`	167	`urpmi --clean`
-		168
150	`# Download of ALCASAR specifics RPM in cache (and test)`	169	`# Download of ALCASAR specifics RPM in cache (and test)`
151	`if [ $Lang == "fr" ]`	170	`if [ $Lang == "fr" ]`
152	`then`	171	`then`
153	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`	172	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`
154	`else`	173	`else`
155	`echo "Download of complementary packages. Please wait ..."`	174	`echo "Download of complementary packages. Please wait ..."`
156	`fi`	175	`fi`
157	`urpmi --auto $PACKAGES --quiet --test --retry 2`	176	`urpmi --auto $PACKAGES --quiet --test --retry 2`
158	`if [ "$?" != "0" ]`	177	`if [ "$?" != "0" ]`
159	`then`	178	`then`
160	`echo`	179	`echo`
161	`if [ $Lang == "fr" ]`	180	`if [ $Lang == "fr" ]`
162	`then`	181	`then`
163	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`	182	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`
164	`else`	183	`else`
165	`echo "An error occurs when downloading complementary packages"`	184	`echo "An error occurs when downloading complementary packages"`
166	`fi`	185	`fi`
167	`rpm_error`	186	`rpm_error`
168	`exit 1`	187	`exit 1`
169	`fi`	188	`fi`
-		189
170	`# update with cached RPM`	190	`# update with cached RPM`
171	`urpmi --auto $PACKAGES`	191	`urpmi --auto $PACKAGES`
172	`if [ "$?" != "0" ]`	192	`if [ "$?" != "0" ]`
173	`then`	193	`then`
174	`echo`	194	`echo`
175	`if [ $Lang == "fr" ]`	195	`if [ $Lang == "fr" ]`
176	`then`	196	`then`
177	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`	197	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`
178	`else`	198	`else`
179	`echo "An error occurs when installing complementary packages"`	199	`echo "An error occurs when installing complementary packages"`
180	`fi`	200	`fi`
181	`rpm_error`	201	`rpm_error`
182	`exit 1`	202	`exit 1`
183	`fi`	203	`fi`
-		204
-		205	`# Keep only the kernel version we compil netflow with, and remove all others`
-		206	`kernelVersion=$(rpm -qa \| grep "^kernel-")`
-		207	`for i in $kernelVersion`
-		208	`do`
-		209	`if [ ! $i = $KERNEL ];then`
-		210	`urpme --auto $i`
-		211	`fi`
-		212	`done`
-		213
184	`# delete unused RPMs`	214	`# delete unused RPMs`
185	`if [ $Lang == "fr" ]`	215	`if [ $Lang == "fr" ]`
186	`then`	216	`then`
187	`echo "Cleaning the system : "`	217	`echo "Cleaning the system : "`
188	`else`	218	`else`
189	`echo "Nettoyage du système : "`	219	`echo "Nettoyage du système : "`
190	`fi`	220	`fi`
191	`for rm_rpm in shorewall mandi radeontool avahi mageia-gfxboot-theme privoxy cpupower squid gamin`	221	`for rm_rpm in shorewall mandi avahi mageia-gfxboot-theme privoxy cpupower squid gamin`
192	`do`	222	`do`
193	`/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null`	223	`/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null`
194	`echo -n "."`	224	`echo -n "."`
195	`done`	225	`done`
196		226
197	`# Save chilli launch script (erase with new rpm one)`	227	`# Save chilli launch script (erase with new rpm one)`
198	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`	228	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`
199	`# Install home made RPMs`	229	`# Install home made RPMs`
200	`urpmi --no-verify --auto conf/rpms/$ARCH/*.rpm`	230	`urpmi --no-verify --auto conf/rpms/$ARCH/*.rpm`
201	`# restore chilli launch script`	231	`# restore chilli launch script`
202	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`	232	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`
203	`# Clean the RPM cache`	233	`# Clean the RPM cache`
204	`urpmi --clean`	234	`urpmi --clean`
205	`exit 0`	235	`exit 0`
206		236

Subversion Repositories ALCASAR

(root)/scripts/alcasar-urpmi.sh @ 2864 – Rev 1785 → 1799