WebSVN – ALCASAR – Diff – /scripts/alcasar-urpmi.sh


#!/bin/bash
# $Id: alcasar-urpmi.sh 1985 2016-07-08 17:33:09Z richard $
 
# alcasar-urpmi.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
 
# script de mise en place des dépots RPM 
# configure the RPM repository
 
Lang=`echo $LANG|cut -c 1-2`
VERSION="5"
ARCH="i586" 
# The kernel version we compile netflow for
KERNEL="kernel-server-4.4.13-1.mga5-1-1.mga5"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop man kernel-firmware-nonfree"
 
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}
 
rpm_error ()
{
echo
if [ $Lang == "fr" ]
then	
	echo "Relancez l'installation ultérieurement."
	echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"
else
	echo "Try an other install later."
	echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"
fi
}
 
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
old="$IFS"
IFS=","
set $fic
for i in $*
do
	if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
	then 
		DISTRIBUTION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
	then 
		CURRENT_VERSION=`echo $i|cut -d"=" -f2`
	fi
	if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
	then 
		ARCH=`echo $i|cut -d"=" -f2`
	fi
done
IFS="$old"
 
# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm
 
# Set the RPM repository (if not already set)
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
#if [ "$ACTIVE_REPO" != "2" ]
#	then
	MIRROR_NBR=2
	#                       For Europeans 
	MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"
	#                       For International install
	MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
	try_nb="0"; nb_repository="0"
	while [ "$nb_repository" != "4" ]
	do
		try_nb=`expr $try_nb + 1`
		MIRRORLIST="MIRRORLIST$try_nb"
		rpm_repository_sync 
		nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
		if [ "$nb_repository" != "4" ]
		then
			if [ $Lang == "fr" ]
			then	
				echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
			else
				echo "An error occurs when synchronising the repositories N°$try_nb"
			fi
			if [ $(expr $try_nb) -eq $MIRROR_NBR ]
			then
				rpm_error
				exit 1
			fi
			if [ $Lang == "fr" ]
			then	
				echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"
			else
				echo "Do you wan't to try a synchronisation with an other repository?"
			fi
			response=0
			PTN='^[oOnNyY]$'
			until [[ $(expr $response : $PTN) -gt 0 ]]
			do
				read response
			done
			if [ "$response" = "n" ] || [ "$response" = "N" ] 
			then
			exit 1
			fi
		fi
	done
#fi
 
# download the kernel used by ALCASAR and fix its version
if [ $Lang == "fr" ]
then	
	echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
	echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
rm -f /etc/urpmi/skip.list
urpmi --auto --quiet $KERNEL
echo "/^kernel/" > /etc/urpmi/skip.list
 
# download updated RPM in cache 
if [ $Lang == "fr" ]
then	
	echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
	echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
	echo "Updated RPM download. Please wait ..."
	echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la récupération des paquetages."
	else
		echo "An error occurs when downloading RPMS"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la mise à jour des paquetages."
	else
		echo "An error occurs when updating packages"
	fi
	rpm_error
	exit 1
fi
# Clean the RPM cache
urpmi --clean
 
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then	
	echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
	echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
	else
		echo "An error occurs when downloading complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# update with cached RPM
urpmi --auto $PACKAGES 
if [ "$?" != "0" ]
then
	echo
	if [ $Lang == "fr" ]
	then	
		echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
	else
		echo "An error occurs when installing complementary packages"
	fi
	rpm_error
	exit 1
fi
 
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
	if [ $i != $KERNEL ];then
		urpme --auto $i
	fi
done
# delete unused RPMs
if [ $Lang == "fr" ]
then
	echo "Cleaning the system : "
else
	echo "Nettoyage du système : "
fi
for rm_rpm in shorewall mandi avahi mageia-gfxboot-theme privoxy cpupower squid gamin
do
	/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null
	echo -n "."
done
 
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
urpmi --no-verify --auto rpms/$ARCH/*.rpm
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated)
/sbin/depmod -a
exit 0
 

Rev 1983	Rev 1985
1	`#!/bin/bash`	1	`#!/bin/bash`
2	`# $Id: alcasar-urpmi.sh 1983 2016-07-08 10:14:42Z raphael.pion $`	2	`# $Id: alcasar-urpmi.sh 1985 2016-07-08 17:33:09Z richard $`
3		3
4	`# alcasar-urpmi.sh`	4	`# alcasar-urpmi.sh`
5	`# by 3abtux and Rexy`	5	`# by 3abtux and Rexy`
6	`# This script is distributed under the Gnu General Public License (GPL)`	6	`# This script is distributed under the Gnu General Public License (GPL)`
7		7
8	`# script de mise en place des dépots RPM`	8	`# script de mise en place des dépots RPM`
9	`# configure the RPM repository`	9	`# configure the RPM repository`
10		10
11	Lang=`echo $LANG\|cut -c 1-2`	11	Lang=`echo $LANG\|cut -c 1-2`
12	`VERSION="5"`	12	`VERSION="5"`
13	`ARCH="i586"`	13	`ARCH="i586"`
14	`# The kernel version we compile netflow for`	14	`# The kernel version we compile netflow for`
15	`KERNEL="kernel-server-4.4.13-1.mga5-1-1.mga5"`	15	`KERNEL="kernel-server-4.4.13-1.mga5-1-1.mga5"`
16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`	16	`# **** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ****`
17	`PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop man"`	17	`PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap apache apache-mod_ssl apache-mod_php dansguardian postfix mariadb ntp bind-utils openssh-server php-xml php-ldap php-mysql php-mysqli php-mbstring php-sockets php-cli php-curl php-pdo_sqlite php-json rng-utils rsync clamav perl-rrdtool perl-MailTools perl-Socket6 fail2ban gnupg ulogd pm-fallback-policy ipset cronie-anacron gammu usbutils locales-en usb_modeswitch tinyproxy vnstat php-gd sudo iftop man kernel-firmware-nonfree"`
18		18
19	`rpm_repository_sync ()`	19	`rpm_repository_sync ()`
20	`{`	20	`{`
21	`cat <<EOF > /etc/urpmi/urpmi.cfg`	21	`cat <<EOF > /etc/urpmi/urpmi.cfg`
22	`{`	22	`{`
23	`downloader: wget`	23	`downloader: wget`
24	`}`	24	`}`
25	`EOF`	25	`EOF`
26	`echo ${!MIRRORLIST}`	26	`echo ${!MIRRORLIST}`
27	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`	27	`urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release`
28	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`	28	`urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates`
29	`urpmi.addmedia non-free --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`	29	`urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release`
-		30	`urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates`
30	`}`	31	`}`
31		32
32	`rpm_error ()`	33	`rpm_error ()`
33	`{`	34	`{`
34	`echo`	35	`echo`
35	`if [ $Lang == "fr" ]`	36	`if [ $Lang == "fr" ]`
36	`then`	37	`then`
37	`echo "Relancez l'installation ultérieurement."`	38	`echo "Relancez l'installation ultérieurement."`
38	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`	39	`echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-urpmi.sh'"`
39	`else`	40	`else`
40	`echo "Try an other install later."`	41	`echo "Try an other install later."`
41	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`	42	`echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-urpmi.sh'"`
42	`fi`	43	`fi`
43	`}`	44	`}`
44		45
45	`# extract the current Mageia version and hardware architecture (i586 ou X64)`	46	`# extract the current Mageia version and hardware architecture (i586 ou X64)`
46	fic=`cat /etc/product.id`	47	fic=`cat /etc/product.id`
47	`old="$IFS"`	48	`old="$IFS"`
48	`IFS=","`	49	`IFS=","`
49	`set $fic`	50	`set $fic`
50	`for i in $*`	51	`for i in $*`
51	`do`	52	`do`
52	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]	53	if [ "`echo $i\|grep distribution\|cut -d'=' -f1`" == "distribution" ]
53	`then`	54	`then`
54	DISTRIBUTION=`echo $i\|cut -d"=" -f2`	55	DISTRIBUTION=`echo $i\|cut -d"=" -f2`
55	`fi`	56	`fi`
56	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]	57	if [ "`echo $i\|grep version\|cut -d'=' -f1`" == "version" ]
57	`then`	58	`then`
58	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`	59	CURRENT_VERSION=`echo $i\|cut -d"=" -f2`
59	`fi`	60	`fi`
60	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]	61	if [ "`echo $i\|grep arch\|cut -d'=' -f1`" == "arch" ]
61	`then`	62	`then`
62	ARCH=`echo $i\|cut -d"=" -f2`	63	ARCH=`echo $i\|cut -d"=" -f2`
63	`fi`	64	`fi`
64	`done`	65	`done`
65	`IFS="$old"`	66	`IFS="$old"`
66		67
67	`# We prefer wget than curl`	68	`# We prefer wget than curl`
68	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`	69	`urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm`
69		70
70	`# Set the RPM repository (if not already set)`	71	`# Set the RPM repository (if not already set)`
71	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`	72	ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg\|grep "mageia.org"\|wc -l`
72	`#if [ "$ACTIVE_REPO" != "2" ]`	73	`#if [ "$ACTIVE_REPO" != "2" ]`
73	`# then`	74	`# then`
74	`MIRROR_NBR=2`	75	`MIRROR_NBR=2`
75	`# For Europeans`	76	`# For Europeans`
76	`MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"`	77	`MIRRORLIST1="http://www.mirrorservice.org/sites/mageia.org/pub/mageia/distrib/$VERSION/$ARCH"`
77	`# For International install`	78	`# For International install`
78	`MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`	79	`MIRRORLIST2="http://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"`
79	`try_nb="0"; nb_repository="0"`	80	`try_nb="0"; nb_repository="0"`
80	`while [ "$nb_repository" != "3" ]`	81	`while [ "$nb_repository" != "4" ]`
81	`do`	82	`do`
82	try_nb=`expr $try_nb + 1`	83	try_nb=`expr $try_nb + 1`
83	`MIRRORLIST="MIRRORLIST$try_nb"`	84	`MIRRORLIST="MIRRORLIST$try_nb"`
84	`rpm_repository_sync`	85	`rpm_repository_sync`
85	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`	86	nb_repository=`cat /etc/urpmi/urpmi.cfg\|grep mirrorlist\|wc -l`
86	`if [ "$nb_repository" != "3" ]`	87	`if [ "$nb_repository" != "4" ]`
87	`then`	88	`then`
88	`if [ $Lang == "fr" ]`	89	`if [ $Lang == "fr" ]`
89	`then`	90	`then`
90	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`	91	`echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."`
91	`else`	92	`else`
92	`echo "An error occurs when synchronising the repositories N°$try_nb"`	93	`echo "An error occurs when synchronising the repositories N°$try_nb"`
93	`fi`	94	`fi`
94	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`	95	`if [ $(expr $try_nb) -eq $MIRROR_NBR ]`
95	`then`	96	`then`
96	`rpm_error`	97	`rpm_error`
97	`exit 1`	98	`exit 1`
98	`fi`	99	`fi`
99	`if [ $Lang == "fr" ]`	100	`if [ $Lang == "fr" ]`
100	`then`	101	`then`
101	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"`	102	`echo "Voulez-vous tenter une synchronisation avec un autre dépôt?"`
102	`else`	103	`else`
103	`echo "Do you wan't to try a synchronisation with an other repository?"`	104	`echo "Do you wan't to try a synchronisation with an other repository?"`
104	`fi`	105	`fi`
105	`response=0`	106	`response=0`
106	`PTN='^[oOnNyY]$'`	107	`PTN='^[oOnNyY]$'`
107	`until [[ $(expr $response : $PTN) -gt 0 ]]`	108	`until [[ $(expr $response : $PTN) -gt 0 ]]`
108	`do`	109	`do`
109	`read response`	110	`read response`
110	`done`	111	`done`
111	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`	112	`if [ "$response" = "n" ] \|\| [ "$response" = "N" ]`
112	`then`	113	`then`
113	`exit 1`	114	`exit 1`
114	`fi`	115	`fi`
115	`fi`	116	`fi`
116	`done`	117	`done`
117	`#fi`	118	`#fi`
118		119
119	`# download the kernel used by ALCASAR and fix its version`	120	`# download the kernel used by ALCASAR and fix its version`
120	`if [ $Lang == "fr" ]`	121	`if [ $Lang == "fr" ]`
121	`then`	122	`then`
122	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`	123	`echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."`
123	`else`	124	`else`
124	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`	125	`echo "Download the Linux kernel used by ALCASAR. Please wait ..."`
125	`fi`	126	`fi`
126	`rm -f /etc/urpmi/skip.list`	127	`rm -f /etc/urpmi/skip.list`
127	`urpmi --auto --quiet $KERNEL`	128	`urpmi --auto --quiet $KERNEL`
128	`echo "/^kernel/" > /etc/urpmi/skip.list`	129	`echo "/^kernel/" > /etc/urpmi/skip.list`
129		130
130	`# download updated RPM in cache`	131	`# download updated RPM in cache`
131	`if [ $Lang == "fr" ]`	132	`if [ $Lang == "fr" ]`
132	`then`	133	`then`
133	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`	134	`echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."`
134	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`	135	`echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"`
135	`else`	136	`else`
136	`echo "Updated RPM download. Please wait ..."`	137	`echo "Updated RPM download. Please wait ..."`
137	`echo "You should now take a coffe (or a good beer) ;-)"`	138	`echo "You should now take a coffe (or a good beer) ;-)"`
138	`fi`	139	`fi`
139	`urpmi --auto --auto-update --quiet --test --retry 2`	140	`urpmi --auto --auto-update --quiet --test --retry 2`
140	`if [ "$?" != "0" ]`	141	`if [ "$?" != "0" ]`
141	`then`	142	`then`
142	`echo`	143	`echo`
143	`if [ $Lang == "fr" ]`	144	`if [ $Lang == "fr" ]`
144	`then`	145	`then`
145	`echo "Une erreur a été détectée lors de la récupération des paquetages."`	146	`echo "Une erreur a été détectée lors de la récupération des paquetages."`
146	`else`	147	`else`
147	`echo "An error occurs when downloading RPMS"`	148	`echo "An error occurs when downloading RPMS"`
148	`fi`	149	`fi`
149	`rpm_error`	150	`rpm_error`
150	`exit 1`	151	`exit 1`
151	`fi`	152	`fi`
152		153
153	`# update with cached RPM`	154	`# update with cached RPM`
154	`urpmi --auto --auto-update`	155	`urpmi --auto --auto-update`
155	`if [ "$?" != "0" ]`	156	`if [ "$?" != "0" ]`
156	`then`	157	`then`
157	`echo`	158	`echo`
158	`if [ $Lang == "fr" ]`	159	`if [ $Lang == "fr" ]`
159	`then`	160	`then`
160	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`	161	`echo "Une erreur a été détectée lors de la mise à jour des paquetages."`
161	`else`	162	`else`
162	`echo "An error occurs when updating packages"`	163	`echo "An error occurs when updating packages"`
163	`fi`	164	`fi`
164	`rpm_error`	165	`rpm_error`
165	`exit 1`	166	`exit 1`
166	`fi`	167	`fi`
167	`# Clean the RPM cache`	168	`# Clean the RPM cache`
168	`urpmi --clean`	169	`urpmi --clean`
169		170
170	`# Download of ALCASAR specifics RPM in cache (and test)`	171	`# Download of ALCASAR specifics RPM in cache (and test)`
171	`if [ $Lang == "fr" ]`	172	`if [ $Lang == "fr" ]`
172	`then`	173	`then`
173	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`	174	`echo "Récupération des paquetages complémentaires. Veuillez patienter ..."`
174	`else`	175	`else`
175	`echo "Download of complementary packages. Please wait ..."`	176	`echo "Download of complementary packages. Please wait ..."`
176	`fi`	177	`fi`
177	`urpmi --auto $PACKAGES --quiet --test --retry 2`	178	`urpmi --auto $PACKAGES --quiet --test --retry 2`
178	`if [ "$?" != "0" ]`	179	`if [ "$?" != "0" ]`
179	`then`	180	`then`
180	`echo`	181	`echo`
181	`if [ $Lang == "fr" ]`	182	`if [ $Lang == "fr" ]`
182	`then`	183	`then`
183	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`	184	`echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."`
184	`else`	185	`else`
185	`echo "An error occurs when downloading complementary packages"`	186	`echo "An error occurs when downloading complementary packages"`
186	`fi`	187	`fi`
187	`rpm_error`	188	`rpm_error`
188	`exit 1`	189	`exit 1`
189	`fi`	190	`fi`
190		191
191	`# update with cached RPM`	192	`# update with cached RPM`
192	`urpmi --auto $PACKAGES`	193	`urpmi --auto $PACKAGES`
193	`if [ "$?" != "0" ]`	194	`if [ "$?" != "0" ]`
194	`then`	195	`then`
195	`echo`	196	`echo`
196	`if [ $Lang == "fr" ]`	197	`if [ $Lang == "fr" ]`
197	`then`	198	`then`
198	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`	199	`echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."`
199	`else`	200	`else`
200	`echo "An error occurs when installing complementary packages"`	201	`echo "An error occurs when installing complementary packages"`
201	`fi`	202	`fi`
202	`rpm_error`	203	`rpm_error`
203	`exit 1`	204	`exit 1`
204	`fi`	205	`fi`
205		206
206	`# Keep only the kernel version we compil netflow with, and remove all others`	207	`# Keep only the kernel version we compil netflow with, and remove all others`
207	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`	208	`kernelVersion=$(rpm -qa \| grep -e ^kernel-server -e ^kernel-desktop)`
208	`for i in $kernelVersion`	209	`for i in $kernelVersion`
209	`do`	210	`do`
210	`if [ $i != $KERNEL ];then`	211	`if [ $i != $KERNEL ];then`
211	`urpme --auto $i`	212	`urpme --auto $i`
212	`fi`	213	`fi`
213	`done`	214	`done`
214	`# delete unused RPMs`	215	`# delete unused RPMs`
215	`if [ $Lang == "fr" ]`	216	`if [ $Lang == "fr" ]`
216	`then`	217	`then`
217	`echo "Cleaning the system : "`	218	`echo "Cleaning the system : "`
218	`else`	219	`else`
219	`echo "Nettoyage du système : "`	220	`echo "Nettoyage du système : "`
220	`fi`	221	`fi`
221	`for rm_rpm in shorewall mandi avahi mageia-gfxboot-theme privoxy cpupower squid gamin`	222	`for rm_rpm in shorewall mandi avahi mageia-gfxboot-theme privoxy cpupower squid gamin`
222	`do`	223	`do`
223	`/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null`	224	`/usr/sbin/urpme --auto $rm_rpm --auto-orphans 2>/dev/null`
224	`echo -n "."`	225	`echo -n "."`
225	`done`	226	`done`
226		227
227	`# Save chilli launch script (erase with new rpm one)`	228	`# Save chilli launch script (erase with new rpm one)`
228	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`	229	`[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/`
229	`# Install home made RPMs`	230	`# Install home made RPMs`
230	`urpmi --no-verify --auto rpms/$ARCH/*.rpm`	231	`urpmi --no-verify --auto rpms/$ARCH/*.rpm`
231	`# restore chilli launch script`	232	`# restore chilli launch script`
232	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`	233	`[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/`
233	`# Clean the RPM cache`	234	`# Clean the RPM cache`
234	`urpmi --clean`	235	`urpmi --clean`
235	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated)`	236	`# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated)`
236	`/sbin/depmod -a`	237	`/sbin/depmod -a`
237	`exit 0`	238	`exit 0`
238		239

Subversion Repositories ALCASAR

(root)/scripts/alcasar-urpmi.sh @ 2656 – Rev 1983 → 1985