Subversion Repositories ALCASAR

; PSI Config File

;

; @category  PHP

; @package   PSI

; @author    Michael Cramer <BigMichi1@users.sourceforge.net>

; @copyright 2009 phpSysInfo

; @license   http://opensource.org/licenses/gpl-2.0.php GNU General Public License version 2, or (at your option) any later version

; @version   SVN: $Id: phpsysinfo.ini.new 705 2012-11-11 00:33:29Z namiltd $

; @link      http://phpsysinfo.sourceforge.net

[main]

; ********************************

;        MAIN PARAMETERS

; ********************************

; Turn on debugging of some functions and include errors and warnings in xml and provide a popup for displaying errors

; - false : no debug information are stored in xml or displayed

; - true : debug information stored in xml and displayed *be careful if set this to true, may include sensitive information from your pc*

;

DEBUG=false

; Turn on logging/unlogging of functions executeProgram() and rfts()

; example : executeProgram () and rfts () record the results to the "/tmp/phpsysinfo.log" file

; LOG="/tmp/phpsysinfo.log"

; example : executeProgram () and rfts () read the results from the "/tmp/phpsysinfo.log" file

; LOG="-/tmp/phpsysinfo.log"

; example : executeProgram () and rfts () read the results from the "/tmp/phpsysinfo.log" file

; LOG="+/tmp/phpsysinfo.log", if lack in the log file it runs normally

;

LOG=false

; Turn on/off compression for JavaScript file

; - JS_COMPRESSION=false  //no compression (recommended with slow processor)

; - JS_COMPRESSION="None"  //code minimizing

; - JS_COMPRESSION="Normal"  //code packing

;

JS_COMPRESSION="Normal"

; Additional paths where to look for installed programs

; Example : ADD_PATHS="/opt/bin,/opt/sbin"

;

ADD_PATHS=false

; List of IP addresses (IPv4) of clients authorized to run

; Example : ALLOWED="127.0.0.1,192.168.1.48,192.168.0.0/24" //allowed IP 127.0.0.1, 192.168.1.48 and 192.168.0.0/24

;           ALLOWED=false //no IP checking

;

ALLOWED=false

; List of sudo commands

; Example : SUDO_COMMANDS="iptables-save" //execute "sudo iptables-save" instead "iptables-save"

;           SUDO_COMMANDS=false //no sudo commands

;

SUDO_COMMANDS=false

; Order of data blocks

; Example : BLOCKS="vitals,hardware,memory,filesystem,network,voltage,current,temperature,fans,power,other,ups" or BLOCKS=true //default order

;           BLOCKS=false //hide all blocks

;

BLOCKS=true

; Maximum time in seconds a script is allowed to run before it is terminated by the parser

;

;MAX_TIMEOUT=30

; executeProgram() timeout value in seconds

;

;EXEC_TIMEOUT=30

; snmprealwalk() and executeProgram("snmpwalk") number of seconds until the first timeout

;

;SNMP_TIMEOUT=3

; snmprealwalk() and executeProgram("snmpwalk") number of times to retry if timeouts occur

;

;SNMP_RETRY=0

; Root path of the system

; Example : ROOTFS="/rootfs"

;

;ROOTFS="/"

; External Linux, GNU Hurd, DrayOS and FortiOS connection parameters via SSH

; For safety reasons make sure that phpsysinfo.ini cannot be read by the network or other users!

; These settings can also be entered for a specific plug-in so that only it connects to an external server

; For safety reasons make sure that phpsysinfo.ini cannot be read by the network or other users!

;

;SSH_HOSTNAME="hostname:22"

;SSH_USER="username"

;SSH_PASSWORD="password"

;

; Additional paths where to look for installed programs

; Example : SSH_ADD_PATHS="/sbin,/usr/sbin"

;

;SSH_ADD_PATHS=false

;

; Additional SSH options

; Example : SSH_ADD_OPTIONS="KexAlgorithms=+diffie-hellman-group1-sha1,HostKeyAlgorithms=+ssh-dss,Ciphers=+3des-cbc"

;

;SSH_ADD_OPTIONS=""

; External WinNT server connection parameters

; Possibility available for WinNT and partly for LINUX (if wmic tool from wmic-linux or openvas-smb package is installed)

; These settings can also be entered for a specific plug-in so that only it connects to an external server

; For safety reasons make sure that phpsysinfo.ini cannot be read by the network or other users!

;

;WMI_HOSTNAME="hostname"

;WMI_USER="username"

;WMI_PASSWORD="password"

; Plugins that should be included in xml and output

; List of plugins should look like "plugin,plugin,plugin". See /plugins directory

; - PLUGINS="Raid,PS"  //list of plugins

; - PLUGINS=false  //no plugins

; included plugins:

; - Raid           - show the software, fake, zpool or megaraid RAID status

; - PS             - show a process tree of all running processes

; - PSStatus       - show a graphical representation if a process is running or not

; - Quotas         - show a table with all quotas that are active and there current state

; - SMART          - show S.M.A.R.T. information from drives that support it

; - BAT            - show battery state on a laptop, tablet or phone

; - UpdateNotifier - show update notifications (only for Ubuntu server)

; - SNMPPInfo      - show printers info via SNMP

; - Uprecords      - show uprecords info

; - PingTest       - show Ping Test info

; - StableBit      - show StableBit Scanner info (WinNT)

; - HyperV         - show Hyper-V info (WinNT)

; - Docker         - show docker stats

; - Viewer         - show output of any command or file viewer.tmp contents

;

PLUGINS=false

; ********************************

;       DISPLAY PARAMETERS

; ********************************

; Define the default display mode

; auto: let user browser choose the mode

; dynamic: use javascript to refresh data

; static: static page (use metatag to reload page)

; bootstrap: use twitter bootstrap template

;

DEFAULT_DISPLAY_MODE="dynamic"

; Define the default language

;

DEFAULT_LANG="en"

; Define the default template

;

DEFAULT_TEMPLATE="aqua"

; Define the default template for frontend "bootstrap"

;

DEFAULT_BOOTSTRAP_TEMPLATE="phpsysinfo"

; Show or hide language picklist

;

SHOW_PICKLIST_LANG=false

; Show or hide template picklist

;

SHOW_PICKLIST_TEMPLATE=true

; Show CPU list expanded

;

SHOW_CPULIST_EXPANDED=true

; Show CPU info expanded

;

SHOW_CPUINFO_EXPANDED=false

; Show memory infos expanded

;

SHOW_MEMORY_INFOS_EXPANDED=false

; Show virtualizer info for Linux, Android and WinNT

;

SHOW_VIRTUALIZER_INFO=true

; Hide loader for frontend "bootstrap"

;

HIDE_BOOTSTRAP_LOADER=false

; Increase the body width for the "dynamic" frontend by pixels. The value should be even

; - 0 : disabled

; - 200 : wider by 200px

; Default is 0 pixels

;

INCREASE_WIDTH=0

; Define the interval for refreshing data in ms

; - 0 : disabled

; - 1000 : 1 second

; Default is 60 seconds

;

REFRESH=60000

; Show a graph for current cpuload

; - true : displayed, but it's a performance hit (because we have to wait to get a value, 1 second)

; - "compact" : displayed like above but in compact mode

; - false : will not be displayed (also in Load Averages field)

;

LOAD_BAR=true

; Display the virtual host name and address

; - Default is canonical host name and address

; - Use USE_VHOST=true to display virtual host name.

;

USE_VHOST=false

; Controls the units & format for network, memory and filesystem

; - 1 KiB = 2^10 bytes = 1,024 bytes

; - 1 KB = 10^3 bytes = 1,000 bytes

; - "B"     everything is in Byte

; - "PiB"   everything is in PeBiByte

; - "TiB"   everything is in TeBiByte

; - "GiB"   everything is in GiBiByte

; - "MiB"   everything is in MeBiByte

; - "KiB"   everything is in KiBiByte

; - "auto_binary" everything is automatic done if value is to big for, e.g MiB then it will be in GiB

; - "PB"    everything is in PetaByte

; - "TB"    everything is in TeraByte

; - "GB"    everything is in GigaByte

; - "MB"    everything is in MegaByte

; - "KB"    everything is in KiloByte

; - "auto_decimal" everything is automatic done if value is to big for, e.g MB then it will be in GB

;

BYTE_FORMAT="auto_binary"

; Format in which temperature is displayed

; - "c"    shown in celsius

; - "f"    shown in fahrenheit

; - "c-f"  both shown first celsius and fahrenheit in braces

; - "f-c"  both shown first fahrenheit and celsius in braces

;

TEMP_FORMAT="c"

; Show devices infos

; Example : SHOW_DEVICES_INFOS=true

;

SHOW_DEVICES_INFOS=false

; Show devices serial number

; Example : SHOW_DEVICES_SERIAL=true

;

SHOW_DEVICES_SERIAL=false

; Format in which datetime is displayed

; - "UTC"    shown as UTC string

; - "locale" shown as Locale string

;

DATETIME_FORMAT="UTC"

; ********************************

;       SENSORS PARAMETERS

; ********************************

; Define the motherboard monitoring program

; We support the following programs so far

; - HDDtemp        http://www.guzu.net/linux/hddtemp.php (Linux)

; - LMSensors      http://www.lm-sensors.org/ (Linux)

; - Healthd        http://healthd.thehousleys.net/ (FreeBSD)

; - HWSensors      http://www.openbsd.org/ (OpenBSD)

; - MBMon          http://www.nt.phys.kyushu-u.ac.jp/shimizu/download/download.html (FreeBSD/Linux/NetBSD/OpenBSD)

; - MBM5           http://mbm.livewiredev.com/ (data from file data/MBM5.csv - WinNT)

; - CpuMem         No addon tool neded (FreeBSD/Linux/WinNT or others but with the dmidecode utility installed)

; - IPMItool       http://ipmitool.sourceforge.net/ (Linux)

; - FreeIPMI       http://www.gnu.org/software/freeipmi/ (FreeBSD/Linux/OpenBSD/SunOS)

; - IPMIutil       http://ipmiutil.sourceforge.net/ (Darwin/FreeBSD/Linux/SunOS/WinNT)

; - IPMIcfg        http://www.supermicro.com/en/solutions/management-software/ipmi-utilities (Linux/WinNT)

; - K8Temp         http://hur.st/k8temp/ (DragonFly/FreeBSD/NetBSD/OpenBSD)

; - PiTemp         No addon tool neded (Raspberry Pi and Banana Pi - Linux)

; - OHM            http://openhardwaremonitor.org/ (WinNT)

; - ThermalZone    No addon tool neded (WinNT/Linux/Android)

; - QTSsnmp        SNMP service enabled and snmp-utils package installed: opkg install snmp-utils (QNAP - QTS Linux)

; - Hwmon          No addon tool neded (Linux)

; - SpeedFan       http://www.almico.com/speedfan.php (required tool packaged in: tools/speedfan/SpeedFanGet_bin.zip) (WinNT)

; - Thinkpad       No addon tool neded (Lenovo Thinkpad - Linux)

; - NvidiaSMI      Nvidia GPU drivers (FreeBSD/Linux/SunOS/WinNT)

; - FortiSensor    No addon tool neded (Fortinet devices - FortiOS)

;

; Example: If you want to use lmsensors : SENSOR_PROGRAM="LMSensors"

;          If you want to use lmsensors and IPMItool: SENSOR_PROGRAM="LMSensors,IPMItool"

;

SENSOR_PROGRAM=false

; Show events of sensors

; - true : show events

; - false : do not show events

;

SENSOR_EVENTS=true

; Sort sensors list

;

SORT_SENSORS_LIST=false

; Some sensors programs contain an additional configuration in the relevant sections [sensor_...]

; ********************************

;      FILESYSTEM PARAMETERS

; ********************************

; Show mount point

; - true : show mount point

; - false : do not show mount point

;

SHOW_MOUNT_POINT=true

; Show mount option

; - true : show mount option

; - false : do not show mount option

;

SHOW_MOUNT_OPTION=true

; Show mount credentials

; - true : show mount credentials

; - false : do not show mount credentials

;

SHOW_MOUNT_CREDENTIALS=false

; Show inode usage

; - true : display used inodes in percent

; - false : hide them

;

SHOW_INODES=true

; Hide mounts

; Example : HIDE_MOUNTS="/home,/usr"

;

HIDE_MOUNTS=""

; Filesystem usage warning threshold in percent

; - 0 : disabled

; - 90 : 90%

; Default is 90%

;

FS_USAGE_THRESHOLD=90

; Ignore usage and usage threshold for filesystem types

; Example : IGNORE_THRESHOLD_FS_TYPES="packagefs, iso9660, squashfs, devfs, devtmpfs, tmpfs, lxfs, udf, UDF, CDFS"

;

IGNORE_THRESHOLD_FS_TYPES="packagefs, iso9660, squashfs, devfs, devtmpfs, tmpfs, lxfs, udf, UDF, CDFS"

; Ignore usage of mounts

; Example : IGNORE_USAGE="/root,/mnt/c"

;

IGNORE_USAGE=""

; Ignore total size of mounts

; Example : IGNORE_TOTAL="/System/Volumes/VM,/System/Volumes/Prebot"

;

IGNORE_TOTAL=""

; Ignore free space size of mounts

; Example : IGNORE_FREE="/zfs/space,/zfs/data"

;

IGNORE_FREE=""

; Hide filesystem types

; Example : HIDE_FS_TYPES="tmpfs,devtmpfs,usbfs,bstfolder"

;

HIDE_FS_TYPES="tmpfs,devtmpfs"

; Hide partitions

; Example : HIDE_DISKS="rootfs,/dev/sda1"

;           HIDE_DISKS=true  //hide all partitions

;

HIDE_DISKS=""

; Hide totals information

;

HIDE_TOTALS=false

; ********************************

;      NETWORK PARAMETERS

; ********************************

; Hide network interfaces

; Example : HIDE_NETWORK_INTERFACE="eth0,sit0"

;           HIDE_NETWORK_INTERFACE=true  //hide all network interfaces

;

HIDE_NETWORK_INTERFACE="lo,tun0"

; Use a regular expression in the name of a hidden network interface (e.g. HIDE_NETWORK_INTERFACE="docker.*")

; - true : use a regular expression

; - false : do not use a regular expression

;

HIDE_NETWORK_INTERFACE_REGEX=false

; Show network interfaces infos for Linux, Android, FreeBSD, NetBSD, OpenBSD, Haiku, Darwin, SunOS, Minix, QNX and WinNT

; Example : SHOW_NETWORK_INFOS=true

;

SHOW_NETWORK_INFOS=true

; Hide MAC address in the infos

;

HIDE_NETWORK_MACADDR=false

; Sort network interfaces list

;

SORT_NETWORK_INTERFACES_LIST=false

; Show network infos expanded

;

SHOW_NETWORK_INFOS_EXPANDED=false

; Show network active speed

; - true : display network active speed

; - "bps" : display network active speed in bits per second (b/s, Kb/s, etc...)

; - false : hide them

;

SHOW_NETWORK_ACTIVE_SPEED=true

; ********************************

;        UPS PARAMETERS

; ********************************

; Define the ups monitoring program

; We support the following programs so far

; - Apcupsd        http://www.apcupsd.com/

; - Nut            http://www.networkupstools.org/

; - SNMPups        monitoring via Simple Network Management Protocol (SNMP)

; - PowerSoftPlus  http://ever.eu/

; - pmset          based on the result of the command "pmset -g batt" on Darwin system

;

; Example: If you want to use Apcupsd : UPS_PROGRAM="Apcupsd"

;          If you want to use Apcupsd and Nut : UPS_PROGRAM="Apcupsd,Nut"

;

UPS_PROGRAM=false

; Apcupsd supports multiple UPSes

; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The defaults are: "127.0.0.1:3551"

; See the following parameters in apcupsd.conf: NETSERVER, NISIP, NISPORT

; It uses the defaults if not specified.

;

UPS_APCUPSD_LIST=false

; define how to access the Apcupsd data

; - "command" execute apcaccess command

; - "data" for reading data from file data/upsapcupsd{ups_number}.tmp

;    content is the output from "apcaccess status"

;

UPS_APCUPSD_ACCESS="command"

; Apcupsd has a CGI monitoring utility called apcupsd-cgi

; You can set the parameter below to true if you have it installed - this will add apcupsd-cgi links to the UPS tree

;

UPS_APCUPSD_CGI_ENABLE=false

; Nut supports multiple UPSes

; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The defaults are: "127.0.0.1:3493"

; See the following parameters in upsd.conf: LISTEN

; It uses the defaults if not specified.

;

UPS_NUT_LIST=false

; define how to access the Nut data

; - "command" execute upsc command

; - "data" for reading data from file data/upsnut{ups_number}.tmp

;    content is the output from "upsc {upsname}"

;

UPS_NUT_ACCESS="command"

; SNMPups supports multiple UPSes

; You can specify comma delimited list in the form <hostname>:<port> or <ip>:<port>. The default port is 161

; List must be specified.

;

UPS_SNMPUPS_LIST=false

; define how to access the SNMP data

; - "php-snmp" execute php snmprealwalk function (php-snmp module must be installed)

; - "command" execute snmpwalk command

; - "data" for reading data from file data/upssnmpups{ups_number}.tmp

;    content is the output from:

;     "snmpwalk -Ona -c public -v 1 -r 0 -t 3 {upsaddress} .1.3.6.1.4.1.318.1.1.1.1>upssnmpups{ups_number}.tmp

;      snmpwalk -Ona -c public -v 1 -r 0 -t 3 {upsaddress} .1.3.6.1.4.1.318.1.1.1.2>>upssnmpups{ups_number}.tmp

;      snmpwalk -Ona -c public -v 1 -r 0 -t 3 {upsaddress} .1.3.6.1.4.1.318.1.1.1.3>>upssnmpups{ups_number}.tmp

;      snmpwalk -Ona -c public -v 1 -r 0 -t 3 {upsaddress} .1.3.6.1.4.1.318.1.1.1.4>>upssnmpups{ups_number}.tmp"

;

UPS_SNMPUPS_ACCESS="php-snmp"

; define how to access the PowerSoftPlus data

; - "command" execute powersoftplus command

; - "data" for reading data from file data/upspowersoftplus.tmp

;    content is the output from "powersoftplus -p"

;

UPS_POWERSOFTPLUS_ACCESS="command"

; define how to access the pmset data

; - "command" execute pmset command

; - "data" for reading data from file data/upspmset.tmp

;    content is the output from "pmset -g batt"

;

UPS_PMSET_ACCESS="command"

; ********************************

;       MISC PARAMETERS

; ********************************

; define how to access the dmidecode data

; - "data" read data from file data/dmidecode.tmp; content is the output from "dmidecode -t 17")

; - "command" execute command: dmidecode -t 17

;   If access error try execute first: chmod 4755 /usr/sbin/dmidecode

;   This method is not recommended for safety reasons!

;

DMIDECODE_ACCESS="command"

; ********************************

;    SENSORS PROGRAMS PARAMETERS

; ********************************

[sensor_hddtemp]

; Hddtemp motherboard monitoring program configuration

;

; If the hddtemp program is available we can read the temperature, if hdd is smart capable

; !!ATTENTION!! hddtemp might be a security issue

; - ACCESS="command"  //read data from 'hddtemp' command (must be set suid)

; - ACCESS="tcp"  //read data from hddtemp deamon (localhost:7634)

;

ACCESS="command"

[sensor_lmsensors]

; LMSensors motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'sensors' command

; - ACCESS="data"  //read data from file data/lmsensors.tmp

;

ACCESS="command"

[sensor_healthd]

; Healthd motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'healthdc' command

; - ACCESS="data"  //read data from file data/healthd.tmp

;

ACCESS="command"

[sensor_mbmon]

; MBMon motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'mbmon -c 1 -r' command

; - ACCESS="data"  //read data from file data/mbmon.tmp

; - ACCESS="tcp"  //read data from mbmon deamon (localhost:411)

;

ACCESS="command"

[sensor_ipmitool]

; IPMItool motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'ipmitool sensor -v' command

;                     //if access error execute first: chmod 666 /dev/ipmi0

; - ACCESS="data"  //read data from file data/ipmitool.tmp

;

ACCESS="command"

[sensor_freeipmi]

; FreeIPMI motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'ipmi-sensors --output-sensor-thresholds' program

; - ACCESS="data"  //read data from file data/freeipmi.tmp

;

ACCESS="command"

[sensor_ipmiutil]

; IPMIutil motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'ipmiutil sensor -stw' command

;                     //if access error execute first: chmod 666 /dev/ipmi0

; - ACCESS="data"  //read data from file data/ipmiutil.tmp

;

ACCESS="command"

[sensor_ipmicfg]

; IPMIcfg motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'ipmicfg -sdr' and/or 'ipmicfg -psfruinfo' command

; - ACCESS="data"  //read data from file data/ipmicfg.tmp (output from: "ipmicfg -sdr>ipmicfg.tmp; ipmicfg -psfruinfo>>ipmicfg.tmp")

;

ACCESS="command"

; Execute power supply FRU health info

; - true   : execute 'ipmicfg --psfruinfo'

; - false  : don't execute 'ipmicfg --psfruinfo'

; - "only" : execute 'ipmicfg --psfruinfo' and don't execute 'ipmicfg -sdr'

;

PSFRUINFO=true

[sensor_k8temp]

; K8Temp motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'k8temp' command

; - ACCESS="data"  //read data from file data/k8temp.tmp

;

ACCESS="command"

[sensor_thermalzone]

; ThermalZone motherboard monitoring program configuration

;

; - ACCESS="command"  //on Linux information is retrieved everytime through system files / on WinNT information is retrieved everytime through WMI

; - ACCESS="data"  //read data from file data/thermalzone.tmp (output of WinNT command "wmic /namespace:\\root\wmi PATH MSAcpi_ThermalZoneTemperature get CriticalTripPoint,CurrentTemperature,InstanceName")

;

ACCESS="command"

[sensor_speedfan]

; SpeedFan motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'speedfanget' command

; - ACCESS="data"  //read data from file data/speedfan.tmp

;

ACCESS="command"

[sensor_nvidiasmi]

; NvidiaSMI motherboard monitoring program configuration

;

; - ACCESS="command"  //read data from 'nvidia-smi -q' command

; - ACCESS="data"  //read data from file data/nvidiasmi.tmp

;

ACCESS="command"

;The path to nvidia-smi.exe for the WinNT system

;

EXE_PATH="c:\Program Files\NVIDIA Corporation\NVSMI\nvidia-smi.exe"

; ********************************

;        PLUGINS PARAMETERS

; ********************************

[bat]

; BAT Plugin configuration

; define how to access the battery statistic data

; - "command" on Linux and Android read data from /proc/acpi/battery/BAT0/info and /proc/acpi/battery/BAT0/state

;                or on newer kernel from /sys/class/power_supply/

;                or from 'upower -d' command (if UPOWER is true)

;             on Android read data from /sys/class/power_supply/ 

;             on Darwin read data from 'ioreg -w0 -l -n AppleSmartBattery -r' command

;             on FreeBSD read data from 'acpiconf -i batt' command

;             on OpenBSD read data from 'sysctl hw.sensors.acpibat0' command

; - "data" (a file must be available in the data directory of the phpsysinfo installation

;          with the filename "bat_info.tmp" and "bat_state.tmp"; content is the output

;          from "cat /proc/acpi/battery/BAT0/info" and "cat /proc/acpi/battery/BAT0/state")

;

ACCESS="command"

; on Lunux try executing 'upower -d' command

; 

UPOWER=false

; Show battery serial number

;

SHOW_SERIAL=false

[raid]

; Raid Plugin configuration

; define how to access the raid statistic data

; - "command" - mdstat:            file "/proc/mdstat" is read (on Linux only)

;             - dmraid:            command "dmraid -s -vv 2>&1" is run (on Linux only)

;                                  If access error try execute first: chmod 4755 /sbin/dmraid

;                                  This method is not recommended for safety reasons!

;             - megactl:           command "megactl -vv" is run (on Linux only)

;                                  downloaded from http://sourceforge.net/projects/megactl/ or http://github.com/hmage/megactl or http://github.com/namiltd/megactl

;                                  If permission error try execute first: chmod 4755 /usr/sbin/megactl

;             - megasasctl:        command "megasasctl -vv" is run (on Linux only)

;                                  downloaded from http://sourceforge.net/projects/megactl/ or http://github.com/hmage/megactl or http://github.com/namiltd/megactl

;                                  If permission error try execute first: chmod 4755 /usr/sbin/megasasctl

;             - megaclisas-status: command "megaclisas-status" is run (or "megaclisas-status.py" on WinNT)

;                                  downloaded from http://hwraid.le-vert.net or https://github.com/eLvErDe/hwraid or https://github.com/ElCoyote27/hwraid 

;             - 3ware-status:      command "3ware-status" is run (or 3ware-status.py" on WinNT)

;                                  downloaded from http://hwraid.le-vert.net or https://github.com/eLvErDe/hwraid or https://github.com/ElCoyote27/hwraid

;             - graid:             command "graid list" is run (on FreeBSD only)

;             - zpool:             command "zpool status" is run

;             - storcli:           command "storcli /call show all" or "storcli /call show all" is run

;             - perccli:           command "perccli /call show all" or "perccli /call show all" is run

;             - idrac:             command "snmpwalk -Ona -c public -v 1 -r 0 -t 3 {device} .1.3.6.1.4.1.674.10892.5.5.1.20" is run

; - "php-snmp"- idrac:             execute php snmprealwalk function (php-snmp module must be installed)

;             - for others the option is inactive (uses "command" instead)

; - "data" (a file must be available in the data directory of the phpsysinfo installation

;         with the filename "raidmdstat.tmp" or "raiddmraid.tmp" or "raidmegactl.tmp" or "raidmegasasctl.tmp" 

;         or "raidmegaclisas-status.tmp" or "raidgraid.tmp" or "raidzpool.tmp" or "raidstorcli.tmp" or "raidperccli.tmp"

;         or "raididrac{device_number}.tmp")

;

ACCESS="command"

; define possible programs

PROGRAM="mdstat,dmraid,megactl,megasasctl,megaclisas-status,3ware-status,graid,zpool,storcli,perccli,idrac"

; Hide RAID devices

; Example : HIDE_DEVICES="md127"

;

HIDE_DEVICES=""

;

; string contains a list of IDRAC devices that are checked

; Example : IDRAC_DEVICES="192.168.0.120"

;

IDRAC_DEVICES=""

[ps]

; PS Plugin configuration

; define how to access the ps statistic data

; - "command" ps command is run everytime the block gets refreshed or build / on WinNT

;             information is retrieved everytime through WMI

; - "data" (a file must be available in the data directory of the phpsysinfo installation

;          with the filename "ps.tmp"; content is the output from "ps -axo pid,ppid,pmem,pcpu,args")

;

ACCESS="command"

; Memory Usage info

;

MEMORY_USAGE=true

; CPU Usage info

;

CPU_USAGE=true

; Show kthreadd child list expanded

;

SHOW_KTHREADD_EXPANDED=false

; Show PID 1 child list expanded

;

SHOW_PID1CHILD_EXPANDED=false

[psstatus]

; PSStatus Plugin configuration

; define how to access the psstatus statistic data

; - "command" pidof command is run everytime the block gets refreshed or build 

;             / on WinNT information is retrieved everytime through WMI

; - "data" a file must be available in the data directory of the phpsysinfo installation

;          with the filename "psstatus.tmp"; content is the output from

;   <code>for ps in "apache2" "mysqld" "sshd"; do echo $ps "|" `pidof -s -x "$ps"`; done</code>

;

ACCESS="command"

; Regular expression search in the process name (e.g. "ddclient.*") for non-WinNT systems 

; - true : Regular expression search (used pgrep command)

; - false : Normal search (used pidof command)

;

USE_REGEX=false

; controls which processes are checked if they are running

;

; string contains a list of process names that are checked, names are seperated by a comma (on WinNT names must end with '.exe')

;

PROCESSES="mysqld, sshd, explorer.exe"

[quotas]

; Quotas Plugin configuration

; define how to access the repquota statistic data

; - "command" repquota command is run everytime the block gets refreshed or build

; - "data" (a file must be available in the data directory of the phpsysinfo installation with the filename "quotas.tmp"; content is the output from "repquota -au")

;

ACCESS="command"

[smart]

; SMART Plugin configuration

; Smartctl program

; If the smartctl program is available we can read S.M.A.R.T informations

; - "command" smartctl command is run everytime the block gets refreshed or build

; if error: Smartctl open device: /dev/sda failed: Permission denied

;      Not recommended method:

;               execute: chmod 4755 /usr/sbin/smartctl

;      Second method:

;            try to set: SUDO_COMMANDS="smartctl" and add to file /etc/sudoers line: apache ALL = (ALL) NOPASSWD: /usr/sbin/smartctl

; - "data" (a file must be available in the data directory of the

;          phpsysinfo installation with the filename "smart{disk_number}.tmp";

;          content is the output from "smartctl --all device"

;          or on WinNT only from "wmic /namespace:\\root\wmi path MSStorageDriver_ATAPISmartData get VendorSpecific | more +{disk_number}")

; - "wmi" information is retrieved everytime through WMI (WinNT only)

;

ACCESS="command"

; Smartctl devices to monitor

; If the smartctl support is enabled, those disks information will be displayed

; - DEVICES="/dev/hda,/dev/hdb"  //Will display those two disks informations

; You also can specify --device option value  for smartctl command surrounded by parentheses eg:

; - DEVICES="(marvell)/dev/sda"

; or

; - DEVICES="(megaraid.0)/dev/sda" //comma in --device option value is replaced by a dot

;

DEVICES="/dev/sda, /dev/sdb"

; Smartctl ID# and column name from "Vendor Specific SMART Attributes with Thresholds" table

; If the smartctl support is enabled, enter the ID#-COLUMN_NAME from "Vendor Specific SMART Attributes with Thresholds" table from smartctl output.

; or for no SCSI devices: ID#-COLUMN_NAME-REPLACEMENT_ID# where REPLACEMENT_ID# is an alternative ID number.

; COLUMN_NAME of this ID# will be displayed in the phpsysinfo S.M.A.R.T table. If you want RAW_VALUE to be displayed for the temperature (ID# 194) enter 194-RAW_VALUE

; - IDS="194-VALUE,4-VALUE,009-RAW_VALUE"  //ID#-COLUMN_NAME, ID#-COLUMN_NAME, etc...

; The additional attributes:

; ATA Error Count is marked as 0-RAW_VALUE

; Non-medium Error Count is marked as 255-RAW_VALUE

;

IDS="005-RAW_VALUE,194-RAW_VALUE,009-RAW_VALUE,012-RAW_VALUE,193-RAW_VALUE-225,001-RAW_VALUE,007-RAW_VALUE,200-RAW_VALUE,197-RAW_VALUE,198-RAW_VALUE,0-RAW_VALUE"

[snmppinfo]

; SNMPPInfo Plugin configuration

; define how to access the SNMP Printer Info statistic data

; - "php-snmp" execute php snmprealwalk function (php-snmp module must be installed)

; - "command" execute snmpwalk command

; - "data" a file must be available in the data directory of the

;          phpsysinfo installation with the filename "snmppinfo{printer_number}.tmp";

; content is the output from:

;    LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.1.5 > snmppinfo{printer_number}.tmp

;    LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.4.1.367.3.2.1.2.24.1.1 >> snmppinfo{printer_number}.tmp

;    LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.43.11.1.1 >> snmppinfo{printer_number}.tmp

;    LANG=C LC_ALL=C snmpwalk -On -c public -v 1 -r 0 -t 3 {printer_address} .1.3.6.1.2.1.43.18.1.1 >> snmppinfo{printer_number}.tmp

;

ACCESS="php-snmp"

;define the Printer devices

;

; string contains a list of printer addresses that are checked

;

DEVICES="192.168.0.5, 192.168.0.9"

[updatenotifier]

; Update Notifier Plugin configuration

; define how to access the updatenotifier statistic data

; - "command" execute command /usr/lib/update-notifier/apt-check

; - "data" reads data from file defined in FILE parameter

;

ACCESS="data"

; define the update info file format

; - true: Ubuntu Landscape format (file: /var/lib/update-notifier/updates-available)

; - false: universal format   (format: A;B)

;          A: total packages to update

;          B: security packages to update

;

UBUNTU_LANDSCAPE_FORMAT=true

; define the update info file. The default is: /var/lib/update-notifier/updates-available

;

FILE="/var/lib/update-notifier/updates-available"

[uprecords]

; Uprecords Plugin configuration

; define how to access the uprecords statistic data

; - "command" uprecords command is run everytime the block gets refreshed or build

;             if access error try execute first: chmod 4755 /usr/bin/uprecords

;             This method is not recommended for safety reasons!

; - "data" (a file must be available in the data directory of the phpsysinfo installation

;          with the filename "uprecords.tmp"; content is the output from "TZ=GMT uprecords -a -w")

;

ACCESS="command"

; define the maximum number of entries to show (for command access)

; default is 10

;

MAX_ENTRIES = 10

; define the short mode (do not print extra statistics)

; default is false

;

SHORT_MODE = false

; denote current system session by asterisk (* at the end) instead  by the arrow (-> at the beginning)

; default is false

;

DENOTE_BY_ASTERISK = false

[viewer]

; Viewer Plugin configuration

; define how to access the data

; - "command" COMMAND command is run everytime the block gets refreshed or build

; - "data" (a file must be available in the data directory of the phpsysinfo installation with the filename "viewer.tmp")

;

ACCESS="command"

; define COMMAND name (for command access)

; eg:

; - "iptables-save" iptables-save command is run everytime the block gets refreshed or build (Linux)

;                   if access error try to set: SUDO_COMMANDS="iptables-save" and add to file /etc/sudoers line: apache ALL = (ALL) NOPASSWD: /sbin/iptables-save

; - "systeminfo"    systeminfo command is run everytime the block gets refreshed or build (WinNT)

;

COMMAND=""

; define COMMAND parameters (for command access)

;

PARAMS=""

[pingtest]

; PingTest Plugin configuration

; define how to access the psstatus statistic data

; - "command" ping command is run everytime the block gets refreshed or build 

; - "data" (a file must be available in the data directory of the phpsysinfo installation

;          with the filename "pingtest.tmp")

;

ACCESS="command"

;define the Addresses

;

; string contains a list of addresses that are checked

; Example : ADDRESSES="127.0.0.1,8.8.8.8"

;

ADDRESSES=""

; Define ping timeout in seconds

; - 0 : default ping command timeout

; - 3 : 3 seconds

; Default is 2 seconds

;

TIMEOUT=2

[stablebit]

; StableBit Plugin configuration

; Show or hide disks serial number

;

SHOW_SERIAL=false