Rev 2815 | Rev 2825 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log
#!/bin/bash
# $Id: alcasar.sh 2818 2020-05-10 21:53:28Z rexy $
# alcasar.sh
# ALCASAR is a Free and open source NAC created by Franck BOUIJOUX (3abtux), Pascal LEVANT and Richard REY (Rexy)
# This script is distributed under the Gnu General Public License (GPL)
# team@alcasar.net
# ALCASAR Install script - CopyLeft ALCASAR Team [Rexy + 3abtux + Steweb + Crox + ...]
# Ce programme est un logiciel libre ; This software is free and open source
# elle que publiée par la Free Software Foundation ; soit la version 3 de la Licence.
# Ce programme est distribué dans l'espoir qu'il sera utile, mais SANS AUCUNE GARANTIE ;
# sans même une garantie implicite de COMMERCIABILITE ou DE CONFORMITE A UNE UTILISATION PARTICULIERE.
# Voir la Licence Publique Générale GNU pour plus de détails.
# Script d'installation d'ALCASAR (Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau)
# ALCASAR est architecturé autour d'une distribution Linux Mageia minimaliste et les logiciels libres suivants :
# Install script for ALCASAR (a secured and authenticated Internet access control captive portal)
# ALCASAR is based on a stripped Mageia (LSB) with the following open source softwares :
# Coovachilli, freeradius, mariaDB, lighttpd, netfilter, e2guardian, ntpd, openssl, dnsmasq, unbound, gammu, havp, libclamav, Ulog, fail2ban, tinyproxy, NFsen and NFdump
# Options :
# -i or --install
# -u or --uninstall
# Functions :
# testing : connectivity tests, free space test and mageia version test
# init : Installation of RPM and scripts
# network : Network parameters
# ACC : ALCASAR Control Center installation
# CA : Certification Authority initialization
# time_server : NTPd configuration
# init_db : Initilization of radius database managed with MariaDB
# freeradius : FreeRadius initialisation
# chilli : coovachilli initialisation (+authentication page)
# e2guardian : E2Guardian filtering HTTP proxy configuration
# antivirus : HAVP + libclamav configuration
# tinyproxy : little proxy for user filtered with "WL + antivirus" and "antivirus"
# ulogd : log system in userland (match NFLOG target of iptables)
# nfsen : Configuration of Netflow grapher (nfsen) & netflow collector (nfcapd)
# unbound : Name server configuration
# dnsmasq : Name server configuration (for whitelist ipset support)
# vnstat : little network stat daemon
# BL : Adaptation of Toulouse University BlackList : split into 3 BL (for unbound, for e2guardian and for Netfilter)
# cron : Logs export + watchdog + connexion statistics
# fail2ban : Fail2ban IDS installation and configuration
# gammu_smsd : Autoregister addon via SMS (gammu-smsd)
# msec : Mandriva security package configuration
# letsencrypt : Let's Encrypt client
# post_install : Security, log rotation, etc.
DEBUG_ALCASAR='off'; export DEBUG_ALCASAR # Debug mode = wait (hit key) after each function
DATE=`date '+%d %B %Y - %Hh%M'`
DATE_SHORT=`date '+%d/%m/%Y'`
Lang=`echo $LANG|cut -c 1-2`
mode="install"
# ******* Files parameters - paramètres fichiers *********
DIR_INSTALL=`pwd` # current directory
DIR_CONF="$DIR_INSTALL/conf" # install directory (with conf files)
DIR_SCRIPTS="$DIR_INSTALL/scripts" # install directory (with script files)
DIR_BLACKLIST="$DIR_INSTALL/blacklist" # install directory (with blacklist files)
DIR_SAVE="/var/Save" # backup directory (traceability_log, user_db, security_log)
DIR_WEB="/var/www/html" # directory of Lighttpd
DIR_DG="/etc/e2guardian" # directory of E2Guardian
DIR_ACC="$DIR_WEB/acc" # directory of the 'ALCASAR Control Center'
DIR_DEST_BIN="/usr/local/bin" # directory of ALCASAR scripts
DIR_DEST_ETC="/usr/local/etc" # directory of ALCASAR conf files
DIR_DEST_SHARE="/usr/local/share" # directory of share files used by ALCASAR (unbound for instance)
CONF_FILE="$DIR_DEST_ETC/alcasar.conf" # central ALCASAR conf file
PASSWD_FILE="/root/ALCASAR-passwords.txt" # text file with the passwords and shared secrets
# ******* DBMS parameters - paramètres SGBD ********
DB_RADIUS="radius" # database name used by FreeRadius server
DB_USER="radius" # user name allows to request the users database
DB_GAMMU="gammu" # database name used by Gammu-smsd
# ******* Network parameters - paramètres réseau *******
HOSTNAME="alcasar" # default hostname
DOMAIN="localdomain" # default local domain
EXTIF='' # EXTIF is connected to the ISP broadband modem/router (In France : Box-FAI)
INTIF='' # INTIF is connected to the consultation network
MTU="1500"
DEFAULT_PRIVATE_IP_MASK="192.168.182.1/24" # Default ALCASAR IP address
# ****** Paths - chemin des commandes *******
SED="/bin/sed -i"
# ****************** End of global parameters *********************
license()
{
if [ $Lang == "fr" ]
then
cat $DIR_INSTALL/gpl-warning.fr.txt | more
else
cat $DIR_INSTALL/gpl-warning.txt | more
fi
response=0
PTN='^[oOyYnN]?$'
until [[ "$response" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Acceptez-vous les termes de cette licence (O/n)? : "
else echo -n "Do you accept the terms of this license (Y/n)? : "
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
exit 1
fi
} # End of license()
header_install()
{
clear
echo "-----------------------------------------------------------------------------"
echo " ALCASAR V$VERSION Installation"
echo "Application Libre pour le Contrôle d'Accès Sécurisé et Authentifié au Réseau"
echo "-----------------------------------------------------------------------------"
} # End of header_install()
########################################################
## Function "testing" ##
## - Test Mageia version ##
## - Test ALCASAR version (if already installed) ##
## - Test free space on /var (>10G) ##
## - Test Internet access ##
########################################################
testing()
{
# Test of Mageia version
# extract the current Mageia version and hardware architecture (i586 ou X64)
fic=`cat /etc/product.id`
unknown_os=0
old="$IFS"
IFS=","
set $fic
for i in "$@"
do
if [ "`echo $i|grep distribution|cut -d'=' -f1`" == "distribution" ]
then
DISTRIBUTION=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
if [ "`echo $i|grep version|cut -d'=' -f1`" == "version" ]
then
CURRENT_VERSION=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
if [ "`echo $i|grep arch|cut -d'=' -f1`" == "arch" ]
then
ARCH=`echo $i|cut -d"=" -f2`
unknown_os=`expr $unknown_os + 1`
fi
done
if [ "$ARCH" != "x86_64" ]
then
if [ $Lang == "fr" ]
then echo "Votre architecture matérielle doit être en 64bits"
else echo "You hardware architecture must be 64bits"
fi
exit 1
fi
IFS="$old"
if [[ ( $unknown_os != 3 ) || ("$DISTRIBUTION" != "Mageia" ) || ( "$CURRENT_VERSION" != "7" ) ]]
then
if [ -e /var/tmp/alcasar-conf.tar.gz ] # update
then
echo
if [ $Lang == "fr" ]
then
echo "La mise à jour automatique d'ALCASAR ne peut pas être réalisée."
echo "1 - Effectuez une sauvegarde des fichiers de traçabilité et de la base des usagers via l'ACC"
echo "2 - Installez Linux-Mageia 7.1 (64bits) et ALCASAR (cf. doc d'installation)"
echo "3 - Importez votre base des usagers"
else
echo "The automatic update of ALCASAR can't be performed."
echo "1 - Save your traceability files and the user database"
echo "2 - Install Linux-Mageia 7.1 (64bits) & ALCASAR (cf. installation doc)"
echo "3 - Import your users database"
fi
else
if [ $Lang == "fr" ]
then echo "L'installation d'ALCASAR ne peut pas être réalisée."
else echo "The installation of ALCASAR can't be performed."
fi
fi
echo
if [ $Lang == "fr" ]
then echo "Le système d'exploitation doit être remplacé (Mageia7.1-64bits)"
else echo "The OS must be replaced (Mageia7.1-64bits)"
fi
exit 1
fi
# Test if ALCASAR is already installed
if [ -e $CONF_FILE ]
then
current_version=`grep ^VERSION= $CONF_FILE | cut -d"=" -f2`
if [ $Lang == "fr" ]
then echo "La version $current_version d'ALCASAR est déjà installée"
else echo "ALCASAR version $current_version is already installed"
fi
response=0
PTN='^[12]$'
until [[ "$response" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Tapez '1' pour une mise à jour; Tapez '2' pour une réinstallation : "
else echo -n "Hit '1' for an update; Hit '2' for a reinstallation : "
fi
read response
done
if [ "$response" = "2" ]
then
rm -f /var/tmp/alcasar-conf*
else
# Retrieve former NICname
EXTIF_saved=`grep ^EXTIF= $CONF_FILE | cut -d'=' -f2-` # EXTernal InterFace
INTIF_saved=`grep ^INTIF= $CONF_FILE | cut -d'=' -f2-` # INTernal InterFace
[ "$(/usr/sbin/ip link | grep -c " $EXTIF_saved:")" -ne 0 ] && EXTIF=$EXTIF_saved || echo "Warning: Network card \"$EXTIF_saved\" is not connected, so \"$EXTIF\" will be used for external network."
[ "$(/usr/sbin/ip link | grep -c " $INTIF_saved:")" -ne 0 ] && INTIF=$INTIF_saved || echo "Warning: Network card \"$INTIF_saved\" is not connected, so \"$INTIF\" will be used for internal network."
# Create the current conf file
$DIR_SCRIPTS/alcasar-conf.sh --create
mode="update"
fi
fi
# Test free space on /var
free_space=`df -BG --output=avail /var|tail -1|tr -d '[:space:]G'`
if [ $free_space -lt 10 ]
then
if [ $Lang == "fr" ]
then echo "place disponible sur /var insufisante ($free_space Go au lieu de 10 Go au minimum)"
else echo "not enough free space on /var ($free_space GB instead of at least 10 GB)"
fi
exit 0
fi
# Detect external/internal interfaces
if [ -z "$EXTIF" ]; then
EXTIF=$(/usr/sbin/ip route list | awk '/^default / {print $5}')
if [ -z "$EXTIF" ]; then
if [ "$Lang" == 'fr' ]
then echo "Aucune passerelle par défaut configurée"
else echo "No default gateway configured"
fi
exit 1
fi
fi
if [ "$Lang" == 'fr' ]
then echo "Interface externe (Internet) utilisée : $EXTIF"
else echo "External interface (Internet) used: $EXTIF"
fi
if [ -z "$INTIF" ]; then
interfacesList=$(/usr/sbin/ip -br link show | cut -d' ' -f1 | grep -v "^\(lo\|tun0\|$EXTIF\)\$")
interfacesCount=$(echo "$interfacesList" | wc -w)
if [ $interfacesCount -eq 0 ]; then
if [ "$Lang" == 'fr' ]
then echo "Aucune interface de disponible pour le réseau interne"
else echo "No interface available for the internal network"
fi
exit 1
elif [ $interfacesCount -eq 1 ]; then
INTIF="$interfacesList"
else
interfacesSorted=$(/usr/sbin/ip -br addr | grep -v "^\(lo\|tun0\|$EXTIF\) " | sort -b -k3n -k2r -k1)
interfacePreferred=$(echo "$interfacesSorted" | head -1 | cut -d' ' -f1)
if [ "$Lang" == 'fr' ]
then echo 'Liste des interfaces disponible :'
else echo 'List of available interfaces:'
fi
echo "$interfacesSorted"
response=''
while true; do
if [ "$Lang" == 'fr' ]
then echo -n "Choix de l'interface interne ? [$interfacePreferred] "
else echo -n "Choice of internal interface ? [$interfacePreferred] "
fi
read response
[ -z "$response" ] && response="$interfacePreferred"
# Check if interface exist
if [ "$(echo "$interfacesList" | grep -c "^$response\$")" -eq 1 ]; then
INTIF="$response"
break
else
if [ "$Lang" == 'fr' ]
then echo "Interface \"$response\" introuvable"
else echo "Interface \"$response\" not found"
fi
fi
done
fi
fi
if [ "$Lang" == 'fr' ]
then echo "Interface interne utilisée : $INTIF"
else echo "Internal interface used: $INTIF"
fi
if [ $Lang == "fr" ]
then echo -n "Tests des paramètres réseau : "
else echo -n "Network parameters tests: "
fi
# Remove conf file if NIC is not plugged (ie : GSM/WIFI/Bt dongles)
cd /etc/sysconfig/network-scripts/ || { echo "Unable to find /etc/sysconfig/network-scripts directory"; exit 1; }
IF_INTERFACES=`ls ifcfg-*|cut -d"-" -f2|grep -v "^lo"|cut -d"*" -f1`
for i in $IF_INTERFACES
do
if [ "$(/usr/sbin/ip link | grep -c " $i:")" -eq 0 ]; then
rm -f ifcfg-$i
if [ $Lang == "fr" ]
then echo "Suppression : ifcfg-$i"
else echo "Deleting: ifcfg-$i"
fi
fi
done
cd $DIR_INSTALL || { echo "Unable to find $DIR_INSTALL directory"; exit 1; }
echo -n "."
# Test Ethernet NIC links state
interfacesDown=$(/usr/sbin/ip -br link | grep "^\($EXTIF\|$INTIF\) " | grep 'NO-CARRIER' | cut -d' ' -f1)
if [ ! -z "$interfacesDown" ]; then
for i in $interfacesDown; do
if [ $Lang == "fr" ]
then
echo -e "\nÉchec"
echo "Le lien réseau de la carte $i n'est pas actif."
echo "Assurez-vous que cette carte est bien connectée à un équipement (commutateur, A.P., etc.)"
else
echo -e "\nFailed"
echo "The link state of $i interface is down."
echo "Make sure that this network card is connected to a switch or an A.P."
fi
done
exit 1
fi
echo -n "."
# Test EXTIF config files
PUBLIC_IP_MASK=`/usr/sbin/ip addr show $EXTIF | grep '^\s*inet\s' | awk '{ print $2 }'`
PUBLIC_IP=`echo $PUBLIC_IP_MASK | cut -d'/' -f1`
PUBLIC_GATEWAY=`/usr/sbin/ip route list | awk -v EXTIF="$EXTIF" '(/^default / && $5 == EXTIF) {print $3}'`
if [ "$(echo $PUBLIC_IP|wc -c)" -lt 7 ] || [ "$(echo $PUBLIC_GATEWAY|wc -c)" -lt 7 ]
then
if [ $Lang == "fr" ]
then
echo -e "\nÉchec"
echo "La carte réseau connectée à Internet ($EXTIF) n'est pas correctement configurée."
echo "Renseignez les champs suivants dans le fichier '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Appliquez les changements : 'systemctl restart network'"
else
echo -e "\nFailed"
echo "The Internet connected network card ($EXTIF) isn't well configured."
echo "The folowing parametres must be set in the file '/etc/sysconfig/network-scripts/ifcfg-$EXTIF' :"
echo "Apply the new configuration: 'systemctl restart network'"
fi
echo "DEVICE=$EXTIF"
echo "IPADDR="
echo "NETMASK="
echo "GATEWAY="
echo "DNS1="
echo "DNS2="
echo "ONBOOT=yes"
exit 1
fi
echo -n "."
# Test if default GW is set on EXTIF (router or ISP provider equipment)
if [ "$(/usr/sbin/ip route list|grep " $EXTIF "|grep -c '^default ')" -ne 1 ] ; then
if [ $Lang == "fr" ]
then
echo -e "\nÉchec"
echo "Vous n'avez pas configuré l'accès à Internet ou le câble réseau n'est pas sur la bonne carte."
echo "Réglez ce problème puis relancez ce script."
else
echo -e "\nFailed"
echo "You haven't configured Internet access or Internet link is on the wrong Ethernet card"
echo "Resolv this problem, then restart this script."
fi
exit 1
fi
echo -n "."
# Test if default GW is alive
arp_reply=`/usr/sbin/arping -b -I$EXTIF -c1 -w2 $PUBLIC_GATEWAY|grep response|cut -d" " -f2`
if [ "$(expr $arp_reply)" -eq 0 ]
then
if [ $Lang == "fr" ]
then
echo -e "\nÉchec"
echo "Le routeur de sortie ou la Box Internet ($PUBLIC_GATEWAY) ne répond pas."
echo "Réglez ce problème puis relancez ce script."
else
echo -e "\nFailed"
echo "The Internet gateway or the ISP equipment ($PUBLIC_GATEWAY) doesn't answered."
echo "Resolv this problem, then restart this script."
fi
exit 1
fi
echo -n "."
# Test Internet connectivity
domainTested='www.google.com'
/usr/bin/curl -s --head "$domainTested" &>/dev/null
if [ $? -ne 0 ]; then
if [ $Lang == "fr" ]
then
echo -e "\nLa tentative de connexion vers Internet a échoué ($domainTested)."
echo "Vérifiez que la carte $EXTIF est bien connectée au routeur du FAI."
echo "Vérifiez la validité des adresses IP des DNS."
else
echo -e "\nThe Internet connection try failed ($domainTested)."
echo "Please, verify that the $EXTIF card is connected with the Internet gateway."
echo "Verify the DNS IP addresses"
fi
exit 1
fi
echo ". : ok"
} # End of testing()
#######################################################################
## Function "init" ##
## - Creation of ALCASAR conf file "/usr/local/etc/alcasar.conf ##
## - Creation of random password for GRUB, mariadb (admin and user) ##
#######################################################################
init()
{
if [ "$mode" != "update" ]
then
# On affecte le nom d'organisme
header_install
ORGANISME=!
PTN='^[a-zA-Z0-9-]*$'
until [[ "$ORGANISME" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez le nom de votre organisme : "
else echo -n "Enter the name of your organism : "
fi
read ORGANISME
if [ "$ORGANISME" == "" ]
then
ORGANISME=!
fi
done
fi
# On crée aléatoirement les mots de passe et les secrets partagés
# We create random passwords and shared secrets
rm -f $PASSWD_FILE
echo "##### ALCASAR ($ORGANISME) security passwords #####" > $PASSWD_FILE
grub2pwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c8`
pbkdf2=`( echo $grub2pwd ; echo $grub2pwd ) | \
LC_ALL=C /usr/bin/grub2-mkpasswd-pbkdf2 | \
grep -v '[eE]nter password:' | \
sed -e "s/PBKDF2 hash of your password is //"`
echo "GRUB2_PASSWORD=$pbkdf2" > /boot/grub2/user.cfg
[ -e /root/grub.default ] || cp /etc/grub.d/10_linux /root/grub.default
cp -f $DIR_CONF/grub-10_linux /etc/grub.d/10_linux # Request password only on menu editing attempts (not when selecting an entry)
chmod 0600 /boot/grub2/user.cfg
echo "# Login name and password to protect GRUB2 boot menu (!!!qwerty keyboard) : " > $PASSWD_FILE
echo "GRUB2_user=root" >> $PASSWD_FILE
echo "GRUB2_password=$grub2pwd" >> $PASSWD_FILE
mysqlpwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
echo "# Login name and Password of MariaDB administrator:" >> $PASSWD_FILE
echo "db_root=$mysqlpwd" >> $PASSWD_FILE
radiuspwd=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
echo "# Login name and password of MariaDB user:" >> $PASSWD_FILE
echo "db_user=$DB_USER" >> $PASSWD_FILE
echo "db_password=$radiuspwd" >> $PASSWD_FILE
secretuam=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
echo "# Shared secret between the script 'intercept.php' and coova-chilli:" >> $PASSWD_FILE
echo "secret_uam=$secretuam" >> $PASSWD_FILE
secretradius=`cat /dev/urandom | tr -dc '[:alnum:]' | head -c16`
echo "# Shared secret between coova-chilli and FreeRadius:" >> $PASSWD_FILE
echo "secret_radius=$secretradius" >> $PASSWD_FILE
chmod 640 $PASSWD_FILE
# copy scripts in in /usr/local/bin
cp -fr $DIR_SCRIPTS/alcasar* $DIR_DEST_BIN/. ; chown -R root:root $DIR_DEST_BIN/alcasar* ; chmod -R 740 $DIR_DEST_BIN/alcasar*
# copy conf files in /usr/local/etc
cp -f $DIR_CONF/etc/alcasar* $DIR_DEST_ETC/. ; chown -R root:apache $DIR_DEST_ETC ; chmod 770 $DIR_DEST_ETC ; chmod 660 $DIR_DEST_ETC/alcasar*
$SED "s?^DB_RADIUS=.*?DB_RADIUS=\"$DB_RADIUS\"?g" $DIR_DEST_BIN/alcasar-mysql.sh
# generate central conf file
cat <<EOF > $CONF_FILE
##########################################
## ##
## ALCASAR Parameters ##
## ##
##########################################
INSTALL_DATE=$DATE
VERSION=$VERSION
ORGANISM=$ORGANISME
EOF
chmod o-rwx $CONF_FILE
} # End of init()
#########################################################
## Function "network" ##
## - Define the several network address ##
## - Define the DNS naming ##
## - INTIF parameters (consultation network) ##
## - Write "/etc/hosts" file ##
## - write "hosts.allow" & "hosts.deny" files ##
#########################################################
network()
{
header_install
if [ "$mode" != "update" ]
then
if [ $Lang == "fr" ]
then echo "Par défaut, l'adresse IP d'ALCASAR sur le réseau de consultation est : $DEFAULT_PRIVATE_IP_MASK"
else echo "The default ALCASAR IP address on consultation network is : $DEFAULT_PRIVATE_IP_MASK"
fi
response=0
PTN='^[oOyYnN]?$'
until [[ "$response" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous utiliser cette adresse et ce plan d'adressage (recommandé) (O/n)? : "
else echo -n "Do you want to use this IP address and this IP addressing plan (recommanded) (Y/n)? : "
fi
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
PRIVATE_IP_MASK="0"
PTN='^\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\).\([01]\?[[:digit:]][[:digit:]]\?\|2[0-4][[:digit:]]\|25[0-5]\)/[012]\?[[:digit:]]$'
until [[ $(expr "$PRIVATE_IP_MASK" : $PTN) -gt 0 ]]
do
if [ $Lang == "fr" ]
then echo -n "Entrez l'adresse IP d'ALCASAR au format CIDR (a.b.c.d/xx) : "
else echo -n "Enter ALCASAR IP address in CIDR format (a.b.c.d/xx) : "
fi
read PRIVATE_IP_MASK
done
else
PRIVATE_IP_MASK=$DEFAULT_PRIVATE_IP_MASK
fi
else
PRIVATE_IP_MASK=`grep ^PRIVATE_IP= conf/etc/alcasar.conf|cut -d"=" -f2`
rm -f conf/etc/alcasar.conf
fi
# Define LAN side global parameters
hostnamectl set-hostname $HOSTNAME.$DOMAIN
PRIVATE_NETWORK=`/bin/ipcalc -n $PRIVATE_IP_MASK | cut -d"=" -f2` # private network address (ie.: 192.168.182.0)
private_network_ending=`echo $PRIVATE_NETWORK | cut -d"." -f4` # last octet of LAN address
PRIVATE_NETMASK=`/bin/ipcalc -m $PRIVATE_IP_MASK | cut -d"=" -f2` # private network mask (ie.: 255.255.255.0)
PRIVATE_PREFIX=`/bin/ipcalc -p $PRIVATE_IP_MASK |cut -d"=" -f2` # network prefix (ie. 24)
PRIVATE_IP=`echo $PRIVATE_IP_MASK | cut -d"/" -f1` # ALCASAR private ip address (consultation LAN side)
if [ $PRIVATE_IP == $PRIVATE_NETWORK ] # when entering network address instead of ip address
then
PRIVATE_IP=`echo $PRIVATE_NETWORK | cut -d"." -f1-3`"."`expr $private_network_ending + 1`
PRIVATE_IP_MASK=`echo $PRIVATE_IP/$PRIVATE_PREFIX`
fi
private_ip_ending=`echo $PRIVATE_IP | cut -d"." -f4` # last octet of LAN address
PRIVATE_SECOND_IP=`echo $PRIVATE_IP | cut -d"." -f1-3`"."`expr $private_ip_ending + 1` # second network address (ex.: 192.168.182.2)
PRIVATE_NETWORK_MASK=$PRIVATE_NETWORK/$PRIVATE_PREFIX # ie.: 192.168.182.0/24
classe=$((PRIVATE_PREFIX/8)) # ie.: 2=classe B, 3=classe C
PRIVATE_NETWORK_SHORT=`echo $PRIVATE_NETWORK | cut -d"." -f1-$classe`. # compatibility with hosts.allow et hosts.deny (ie.: 192.168.182.)
PRIVATE_MAC=`/usr/sbin/ip link show $INTIF | grep ether | cut -d" " -f6| sed 's/:/-/g'| awk '{print toupper($0)}'` # MAC address of INTIF
# Define Internet parameters
DNS1=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS1='| cut -d"=" -f2` # 1st DNS server
DNS2=`cat /etc/sysconfig/network-scripts/ifcfg-$EXTIF | grep '^DNS2=' | cut -d"=" -f2` # 2nd DNS server
DNS1=${DNS1:=208.67.220.220}
DNS2=${DNS2:=208.67.222.222}
# if [ "$DNS1" == "" ]
# then
# if [ $Lang == "fr" ]
# then
# echo "L'adresse IP des serveurs DNS ne sont pas corrects"
# echo "Vérifiez la configuration de la carte réseau externe ($EXTIF)"
# else
# echo "The IP address of DNS servers are not set correctly"
# echo "Check the extern network card configuration ($EXTIF)"
# fi
# exit 0
# fi
PUBLIC_NETMASK=`/bin/ipcalc -m $PUBLIC_IP_MASK | cut -d"=" -f2`
PUBLIC_PREFIX=`/bin/ipcalc -p $PUBLIC_IP $PUBLIC_NETMASK|cut -d"=" -f2`
PUBLIC_NETWORK=`/bin/ipcalc -n $PUBLIC_IP/$PUBLIC_PREFIX|cut -d"=" -f2`
# Write network parameters in the conf file
echo "HOSTNAME=$HOSTNAME" >> $CONF_FILE
echo "DOMAIN=$DOMAIN" >> $CONF_FILE
echo "EXTIF=$EXTIF" >> $CONF_FILE
echo "INTIF=$INTIF" >> $CONF_FILE
# Retrieve NIC name of other consultation LAN
INTERFACES=`/usr/sbin/ip link|grep '^[[:digit:]]:'|grep -v "^lo\|$EXTIF\|tun0"|cut -d " " -f2|tr -d ":"`
for i in $INTERFACES
do
SUB=`echo ${i:0:2}`
if [ $SUB = "wl" ]
then WIFIF=$i
elif [ "$i" != "$INTIF" ] && [ $SUB != "ww" ]
then LANIF=$i
fi
done
if [ -n "$WIFIF" ]
then echo "WIFIF=$WIFIF" >> $CONF_FILE
elif [ -n "$LANIF" ]
then echo "LANIF=$LANIF" >> $CONF_FILE
fi
IP_SETTING=`grep BOOTPROTO /etc/sysconfig/network-scripts/ifcfg-$EXTIF|cut -d"=" -f2` # test static or dynamic
if [ $IP_SETTING == "dhcp" ]
then
echo "PUBLIC_IP=dhcp" >> $CONF_FILE
echo "GW=dhcp" >> $CONF_FILE
else
echo "PUBLIC_IP=$PUBLIC_IP/$PUBLIC_PREFIX" >> $CONF_FILE
echo "GW=$PUBLIC_GATEWAY" >> $CONF_FILE
fi
echo "DNS1=$DNS1" >> $CONF_FILE
echo "DNS2=$DNS2" >> $CONF_FILE
echo "PUBLIC_MTU=$MTU" >> $CONF_FILE
echo "PRIVATE_IP=$PRIVATE_IP_MASK" >> $CONF_FILE
echo "DHCP=on" >> $CONF_FILE
echo "EXT_DHCP_IP=" >> $CONF_FILE
echo "RELAY_DHCP_IP=" >> $CONF_FILE
echo "RELAY_DHCP_PORT=" >> $CONF_FILE
echo "INT_DNS_DOMAIN=" >> $CONF_FILE
echo "INT_DNS_IP=" >> $CONF_FILE
echo "INT_DNS_ACTIVE=off" >> $CONF_FILE
# network default
[ -e /etc/sysconfig/network.default ] || cp /etc/sysconfig/network /etc/sysconfig/network.default
cat <<EOF > /etc/sysconfig/network
NETWORKING=yes
FORWARD_IPV4=true
EOF
# write "/etc/hosts"
[ -e /etc/hosts.default ] || cp /etc/hosts /etc/hosts.default
cat <<EOF > /etc/hosts
127.0.0.1 localhost
$PRIVATE_IP $HOSTNAME
EOF
# write EXTIF (Internet) config
[ -e /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF ] || cp /etc/sysconfig/network-scripts/ifcfg-$EXTIF /etc/sysconfig/network-scripts/default-ifcfg-$EXTIF
if [ $IP_SETTING == "dhcp" ]
then
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=dhcp
DNS1=127.0.0.1
PEERDNS=no
RESOLV_MODS=yes
ONBOOT=yes
NOZEROCONF=yes
METRIC=10
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
else
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$EXTIF
DEVICE=$EXTIF
BOOTPROTO=static
IPADDR=$PUBLIC_IP
NETMASK=$PUBLIC_NETMASK
GATEWAY=$PUBLIC_GATEWAY
DNS1=127.0.0.1
RESOLV_MODS=yes
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
MTU=$MTU
EOF
fi
# write INTIF (consultation LAN) in normal mode
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
cp -f /etc/sysconfig/network-scripts/ifcfg-$INTIF /etc/sysconfig/network-scripts/default-ifcfg-$INTIF
# write INTIF in bypass mode (see "alcasar-bypass.sh")
cat <<EOF > /etc/sysconfig/network-scripts/bypass-ifcfg-$INTIF
DEVICE=$INTIF
BOOTPROTO=static
IPADDR=$PRIVATE_IP
NETMASK=$PRIVATE_NETMASK
ONBOOT=yes
METRIC=10
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
######### Config WIFIF (consultation WIFI) ou LANIF (consultation LAN) in normal mode #################
if [ -n "$WIFIF" ] && [ "$WIFIF" != "$INTIF" ]
then
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$WIFIF
DEVICE=$WIFIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
elif [ -n "$LANIF" ]
then
cat <<EOF > /etc/sysconfig/network-scripts/ifcfg-$LANIF
DEVICE=$LANIF
BOOTPROTO=static
ONBOOT=yes
NOZEROCONF=yes
MII_NOT_SUPPORTED=yes
IPV6INIT=no
IPV6TO4INIT=no
ACCOUNTING=no
USERCTL=no
EOF
fi
# write hosts.allow & hosts.deny
[ -e /etc/hosts.allow.default ] || cp /etc/hosts.allow /etc/hosts.allow.default
cat <<EOF > /etc/hosts.allow
ALL: LOCAL, 127.0.0.1, localhost, $PRIVATE_IP
sshd: ALL
ntpd: $PRIVATE_NETWORK_SHORT
EOF
[ -e /etc/host.deny.default ] || cp /etc/hosts.deny /etc/hosts.deny.default
cat <<EOF > /etc/hosts.deny
ALL: ALL: spawn ( /bin/echo "service %d demandé par %c" | /bin/mail -s "Tentative d'accès au service %d par %c REFUSE !!!" security ) &
EOF
chmod o+r $DIR_DEST_BIN/alcasar-iptables.sh #lecture possible pour apache (interface php du filtrage réseau)
# create the ip_blocked file with a first line (LAN between ALCASAR and the Internet GW)
echo "#$PUBLIC_NETWORK/$PUBLIC_PREFIX LAN-ALCASAR-BOX" > $DIR_DEST_ETC/alcasar-ip-blocked
# load conntrack ftp module
[ -e /etc/modprobe.preload.default ] || cp /etc/modprobe.preload /etc/modprobe.preload.default
echo "nf_conntrack_ftp" >> /etc/modprobe.preload
# load ipt_NETFLOW module
echo "ipt_NETFLOW" >> /etc/modprobe.preload
# modify iptables service files (start with "alcasar-iptables.sh" and stop with flush)
[ -e /lib/systemd/system/iptables.service.default ] || cp /lib/systemd/system/iptables.service /lib/systemd/system/iptables.service.default
$SED 's/ExecStart=\/usr\/libexec\/iptables.init start/ExecStart=\/usr\/local\/bin\/alcasar-iptables.sh/' /lib/systemd/system/iptables.service
[ -e /usr/libexec/iptables.init.default ] || cp /usr/libexec/iptables.init /usr/libexec/iptables.init.default
$SED "s?\[ -f \$IPTABLES_CONFIG \] .*?#&?" /usr/libexec/iptables.init # comment the test (flush all rules & policies)
#
# the script "$DIR_DEST_BIN/alcasar-iptables.sh" is launched at the end in order to allow update via ssh
} # End of network()
##################################################################
## Fonction "CA" ##
## - Creating the CA and the server certificate (lighttpd) ##
##################################################################
CA()
{
$DIR_DEST_BIN/alcasar-CA.sh
chmod 755 /etc/pki/
chown root:apache /etc/pki/CA; chmod 750 /etc/pki/CA
chmod 640 /etc/pki/CA/*
chown root:root /etc/pki/CA/private; chmod 700 /etc/pki/CA/private
chmod 600 /etc/pki/CA/private/*
chown -R root:apache /etc/pki/tls/private; chmod 750 /etc/pki/tls/private
chmod 640 /etc/pki/tls/private/*
chmod 644 /etc/pki/tls/certs/* # "freshclam" need to access to that bundle
} # End of CA()
###################################################
## Function "ACC" ##
## - copy ALCASAR Control Center (ACC) files ##
## - configuration of the web server (Lighttpd) ##
## - creation of the first ACC admin account ##
## - secure the ACC access ##
###################################################
ACC()
{
[ -d $DIR_WEB ] && rm -rf $DIR_WEB
mkdir $DIR_WEB
# Copy & adapt ACC files
cp -rf $DIR_INSTALL/web/* $DIR_WEB/
$SED "s?99/99/9999?$DATE_SHORT?g" $DIR_ACC/menu.php
$SED "s?\$DB_RADIUS = .*?\$DB_RADIUS = \"$DB_RADIUS\"\;?g" $DIR_ACC/welcome.php
$SED "s?\$DB_USER = .*?\$DB_USER = \"$DB_USER\"\;?g" $DIR_ACC/welcome.php
$SED "s?\$radiuspwd = .*?\$radiuspwd = \"$radiuspwd\"\;?g" $DIR_ACC/welcome.php
chown -R apache:apache $DIR_WEB/*
# copy & adapt "freeradius-web" files
cp -rf $DIR_CONF/freeradius-web/ /etc/
[ -e /etc/freeradius-web/admin.conf.default ] || cp /etc/freeradius-web/admin.conf /etc/freeradius-web/admin.conf.default
$SED "s?^general_domain:.*?general_domain: $DOMAIN?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_username:.*?sql_username: $DB_USER?g" /etc/freeradius-web/admin.conf
$SED "s?^sql_password:.*?sql_password: $radiuspwd?g" /etc/freeradius-web/admin.conf
cat <<EOF > /etc/freeradius-web/naslist.conf
nas1_name: alcasar-$ORGANISME
nas1_model: Network Access Controler
nas1_ip: $PRIVATE_IP
nas1_port_num: 0
nas1_community: public
EOF
chown -R apache:apache /etc/freeradius-web/
# create the log & backup structure :
# - base = users database
# - archive = tarball of "base + http firewall + netflow"
# - security = watchdog log
for i in base archive security activity_report;
do
[ -d $DIR_SAVE/$i ] || mkdir -p $DIR_SAVE/$i
done
chown -R root:apache $DIR_SAVE
# Configuring & securing php
[ -e /etc/php.ini.default ] || cp /etc/php.ini /etc/php.ini.default
timezone=`cat /etc/sysconfig/clock|grep ZONE|cut -d"=" -f2`
$SED "s?^;date.timezone =.*?date.timezone = $timezone?g" /etc/php.ini
$SED "s?^upload_max_filesize.*?upload_max_filesize = 100M?g" /etc/php.ini
$SED "s?^post_max_size.*?post_max_size = 100M?g" /etc/php.ini
$SED "s?^display_errors.*?display_errors = Off?" /etc/php.ini
$SED "s?^display_startup_errors.*?display_startup_errors = Off?" /etc/php.ini
$SED "s?^html_errors.*?html_errors = Off?g" /etc/php.ini
$SED "s?^expose_php.*?expose_php = Off?g" /etc/php.ini
$SED "s?^allow_url_fopen.*?allow_url_fopen = Off?" /etc/php.ini
# Configuring & securing Lighttpd
rm -rf /var/www/cgi-bin/* /var/www/perl/* /var/www/icons/README* /var/www/error/README*
[ -e /etc/lighttpd/lighttpd.conf.default ] || cp /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.default
$SED "s?^server\.use-ipv6.*?server\.use-ipv6 = \"disable\"?g" /etc/lighttpd/lighttpd.conf
$SED "s?^#server\.bind.*?server\.bind = \"$PRIVATE_IP\"?g" /etc/lighttpd/lighttpd.conf
$SED "s?^server\.bind.*?server\.bind = \"$PRIVATE_IP\"?g" /etc/lighttpd/lighttpd.conf
$SED "s?^#server\.tag.*?server\.tag = \"\"?g" /etc/lighttpd/lighttpd.conf
echo "include \"vhosts.d/alcasar.conf\"" >> /etc/lighttpd/lighttpd.conf
[ -e /etc/lighttpd/modules.conf.default ] || cp /etc/lighttpd/modules.conf /etc/lighttpd/modules.conf.default
$SED "s?^#[ ]*\"mod_auth\",.*?\"mod_auth\",?g" /etc/lighttpd/modules.conf
$SED "s?^#[ ]*\"mod_alias\",.*?\"mod_alias\",?g" /etc/lighttpd/modules.conf
$SED "s?^#[ ]*\"mod_redirect\",.*?\"mod_redirect\",?g" /etc/lighttpd/modules.conf
$SED "/^[ ]*\"mod_redirect\",/a\"mod_openssl\"," /etc/lighttpd/modules.conf
$SED "s?^#include \"conf.d/fastcgi.conf\".*?include \"conf.d/fastcgi.conf\"?g" /etc/lighttpd/modules.conf
[ -e /etc/lighttpd/conf.d/fastcgi.conf.default ] || cp /etc/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf.default
cp $DIR_CONF/lighttpd/conf.d/fastcgi.conf /etc/lighttpd/conf.d/fastcgi.conf
[ -e /etc/php-fpm.conf.default ] || cp /etc/php-fpm.conf /etc/php-fpm.conf.default
$SED "s?^;listen\.owner.*?listen\.owner = apache?g" /etc/php-fpm.conf
$SED "s?^;listen\.group.*?listen\.group = apache?g" /etc/php-fpm.conf
$SED "s?^;listen\.mode.*?listen\.mode = 0660?g" /etc/php-fpm.conf
[ -d /etc/lighttpd/vhosts.d ] || mkdir /etc/lighttpd/vhosts.d
cp $DIR_CONF/lighttpd/vhosts.d/* /etc/lighttpd/vhosts.d/
$SED 's/^$SERVER\["socket"\] == ".*:443.*/$SERVER\["socket"\] == "'"$PRIVATE_IP"':443" {/g' /etc/lighttpd/vhosts.d/alcasar-with-ssl.conf
$SED 's/^$SERVER\["socket"\] == ".*:443.*/$SERVER\["socket"\] == "'"$PRIVATE_IP"':443" {/g' /etc/lighttpd/vhosts.d/alcasar-without-ssl.conf
$SED "s/^\([\t ]*\)var.server_name.*/\1var.server_name = \"$PRIVATE_IP\"/g" /etc/lighttpd/vhosts.d/alcasar-with-ssl.conf
$SED "s/^\([\t ]*\)var.server_name.*/\1var.server_name = \"$PRIVATE_IP\"/g" /etc/lighttpd/vhosts.d/alcasar-without-ssl.conf
ln -s /etc/lighttpd/vhosts.d/alcasar-without-ssl.conf /etc/lighttpd/vhosts.d/alcasar.conf
[ -d /var/log/lighttpd ] || mkdir /var/log/lighttpd
[ -e /var/log/lighttpd/access.log ] || touch /var/log/lighttpd/access.log
[ -e /var/log/lighttpd/error.log ] || touch /var/log/lighttpd/error.log
chown -R apache:apache /var/log/lighttpd
# Creation of the first account (in 'admin' profile)
if [ "$mode" = "install" ]
then
header_install
# Creation of keys file for the admin account ("admin")
[ -d $DIR_DEST_ETC/digest ] && rm -rf $DIR_DEST_ETC/digest
mkdir -p $DIR_DEST_ETC/digest
chmod 755 $DIR_DEST_ETC/digest
if [ $Lang == "fr" ]
then echo "Création du premier compte administrateur : "
else echo "Creation of the first admin account : "
fi
until [ -s $DIR_DEST_ETC/digest/key_admin ]
do
$DIR_DEST_BIN/alcasar-profil.sh --add admin
done
fi
# Creation of ACC certs links
[ -d /var/www/html/certs ] || mkdir /var/www/html/certs
ln -s /etc/pki/CA/alcasar-ca.crt /var/www/html/certs/certificat_alcasar_ca.crt
# Run lighttpd after coova (in order waiting tun0 to be up)
$SED "s?^After=.*?After=network.target remote-fs.target nss-lookup.target chilli.service?g" /lib/systemd/system/lighttpd.service
# Log file for ACC access imputability
[ -e /var/Save/security/acc_access.log ] || touch /var/Save/security/acc_access.log
chown root:apache /var/Save/security/acc_access.log
chmod 664 /var/Save/security/acc_access.log
} # End of ACC()
#############################################################
## Function "time_server" ##
## - Configuring NTP server ##
#############################################################
time_server()
{
# Set the Internet time server
[ -e /etc/ntp/step-tickers.default ] || cp /etc/ntp/step-tickers /etc/ntp/step-tickers.default
cat <<EOF > /etc/ntp/step-tickers
0.fr.pool.ntp.org # adapt to your country
1.fr.pool.ntp.org
2.fr.pool.ntp.org
EOF
[ -e /etc/ntp.conf.default ] || cp /etc/ntp.conf /etc/ntp.conf.default
cat <<EOF > /etc/ntp.conf
server 0.fr.pool.ntp.org # adapt to your country
server 1.fr.pool.ntp.org
server 2.fr.pool.ntp.org
server 127.127.1.0 # local clock si NTP internet indisponible ...
fudge 127.127.1.0 stratum 10
restrict $PRIVATE_NETWORK mask $PRIVATE_NETMASK nomodify notrap
restrict 127.0.0.1
driftfile /var/lib/ntp/drift
logfile /var/log/ntp.log
disable monitor
EOF
chown -R ntp:ntp /var/lib/ntp
# Synchronize now
ntpd -4 -q -g &
} # End of time_server()
#####################################################################
## Function "init_db" ##
## - Mysql initialization ##
## - Set admin (root) password ##
## - Remove unused users & databases ##
## - Radius database creation ##
## - Copy of accounting tables (mtotacct, totacct) & userinfo ##
#####################################################################
init_db()
{
if [ "`systemctl is-active mysqld`" == "active" ]
then
systemctl stop mysqld
fi
rm -rf /var/lib/mysql # to be sure that there is no former installation
[ -e /etc/my.cnf.default ] || cp /etc/my.cnf /etc/my.cnf.default
$SED "s?^tmpdir.*?tmpdir=/tmp?g" /etc/my.cnf
$SED "s?^port.*?#&?g" /etc/my.cnf # we use unix socket only
$SED "s?^;collation_server =.*?collation_server = utf8_unicode_ci?g" /etc/my.cnf
$SED "s?^;character_set_server =.*?character_set_server = utf8?g" /etc/my.cnf # accentuated user names are allowed
[ -e /etc/my.cnf.d/feedback.cnf ] && $SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/feedback.cnf # remove the feedback plugin (ALCASAR doesn't report anything !)
[ -e /etc/my.cnf.d/auth_gssapi.cnf ] && $SED "s?^plugin-load.*?#&?g" /etc/my.cnf.d/auth_gssapi.cnf # remove GSS plugin (ALCASAR doesn't use Kerberos)
/usr/sbin/mysqld-prepare-db-dir > /dev/null 2>&1
/usr/bin/systemctl set-environment MYSQLD_OPTS="--skip-grant-tables --skip-networking"
/usr/bin/systemctl start mysqld
nb_round=1
while [ ! -S /var/lib/mysql/mysql.sock ] && [ $nb_round -lt 10 ] # we wait until mariadb is on
do
nb_round=`expr $nb_round + 1`
sleep 2
done
if [ ! -S /var/lib/mysql/mysql.sock ]
then
echo "Problème : la base données 'MariaDB' ne s'est pas lancée !"
exit
fi
# Secure the server
/usr/bin/mysql --execute "GRANT ALL PRIVILEGES ON *.* TO root@'localhost' IDENTIFIED BY '$mysqlpwd';"
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
$MYSQL "DROP DATABASE IF EXISTS test;DROP DATABASE IF EXISTS tmp;"
$MYSQL "CONNECT mysql;DELETE from user where User='';DELETE FROM user WHERE User='root' AND Host NOT IN ('localhost','127.0.0.1','::1');FLUSH PRIVILEGES;"
# Create 'radius' database
$MYSQL "CREATE DATABASE IF NOT EXISTS $DB_RADIUS;GRANT ALL ON $DB_RADIUS.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd';FLUSH PRIVILEGES;"
# Add an empty radius database structure
/usr/bin/mysql -u$DB_USER -p$radiuspwd $DB_RADIUS < $DIR_CONF/empty-radiusd-db.sql
# modify the start script in order to close accounting connexion when the system is comming down or up
[ -e /lib/systemd/system/mysqld.service.default ] || cp /lib/systemd/system/mysqld.service /lib/systemd/system/mysqld.service.default
$SED "/^ExecStart=/a ExecStop=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /usr/lib/systemd/system/mysqld.service
$SED "/^ExecStop=/a ExecStartPost=$DIR_DEST_BIN/alcasar-mysql.sh -acct_stop" /lib/systemd/system/mysqld.service
/usr/bin/systemctl unset-environment MYSQLD_OPTS
/usr/bin/systemctl daemon-reload
} # End of init_db()
###################################################################
## Function "freeradius" ##
## - Set the configuration files ##
## - Set the shared secret between coova-chilli and freeradius ##
## - Adapt the Mysql conf file and counters ##
###################################################################
freeradius()
{
cp -f $DIR_CONF/empty-radiusd-db.sql /etc/raddb/
chown -R radius:radius /etc/raddb
[ -e /etc/raddb/radiusd.conf.default ] || cp /etc/raddb/radiusd.conf /etc/raddb/radiusd.conf.default
# Set radius global parameters (radius.conf)
$SED "s?^[\t ]*#[\t ]*user =.*?user = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*#[\t ]*group =.*?group = radius?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*status_server =.*?status_server = no?g" /etc/raddb/radiusd.conf
$SED "s?^[\t ]*proxy_requests.*?proxy_requests = no?g" /etc/raddb/radiusd.conf # remove the proxy function
$SED "s?^[\t ]*\$INCLUDE proxy.conf.*?#\$INCLUDE proxy.conf?g" /etc/raddb/radiusd.conf # remove the proxy function
# Add ALCASAR & Coovachilli dictionaries
[ -e /etc/raddb/dictionary.default ] || cp /etc/raddb/dictionary /etc/raddb/dictionary.default
cp $DIR_CONF/radius/dictionary.alcasar /etc/raddb/
echo '$INCLUDE dictionary.alcasar' > /etc/raddb/dictionary
cp /usr/share/doc/coova-chilli/dictionary.coovachilli /etc/raddb/
echo '$INCLUDE dictionary.coovachilli' >> /etc/raddb/dictionary
# Set "client.conf" to describe radius clients (coova on 127.0.0.1)
[ -e /etc/raddb/clients.conf.default ] || cp -f /etc/raddb/clients.conf /etc/raddb/clients.conf.default
cat << EOF > /etc/raddb/clients.conf
client localhost {
ipaddr = 127.0.0.1
secret = $secretradius
shortname = chilli
nas_type = other
}
EOF
# Set Virtual server
# Remvoveing all except "alcasar virtual site")
# INFO : To enable 802.1X, add the "innser-tunnel" virtual server (link in sites-enabled) Change the firewall rules to allow "radius" extern connections.
cp $DIR_CONF/radius/alcasar /etc/raddb/sites-available/alcasar
cp $DIR_CONF/radius/alcasar-with-ldap /etc/raddb/sites-available/alcasar-with-ldap
chown radius:apache /etc/raddb/sites-available/alcasar*
chmod 660 /etc/raddb/sites-available/alcasar*
rm -f /etc/raddb/sites-enabled/*
ln -s /etc/raddb/sites-available/alcasar /etc/raddb/sites-enabled/alcasar
# Set modules
# Add custom LDAP "available module"
# INFO : To enable 802.1X, add the "eap" module and verify access to the keys (/etc/pki/tls/private/radius.pem). Change the firewall rules to allow "radius" extern connections.
cp -f $DIR_CONF/radius/ldap-alcasar /etc/raddb/mods-available/
chown -R radius:radius /etc/raddb/mods-available/ldap-alcasar
# Set only usefull modules for ALCASAR (! the module 'ldap-alcasar' is enabled only via ACC)
rm -rf /etc/raddb/mods-enabled/*
for mods in sql sqlcounter attr_filter expiration logintime pap expr always
do
ln -s /etc/raddb/mods-available/$mods /etc/raddb/mods-enabled/$mods
done
# Configure SQL module
[ -e /etc/raddb/mods-available/sql.default ] || cp /etc/raddb/mods-available/sql /etc/raddb/mods-available/sql.default
$SED "s?^[\t ]*driver =.*?driver = \"rlm_sql_mysql\"?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*dialect =.*?dialect = \"mysql\"?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*radius_db =.*?radius_db = \"$DB_RADIUS\"?g" /etc/raddb/mods-available/sql
$SED "s?^#[\t ]*server =.*?server = \"localhost\"?g" /etc/raddb/mods-available/sql
$SED "s?^#[\t ]*port =.*?port = \"3306\"?g" /etc/raddb/mods-available/sql
$SED "s?^#[\t ]*login =.*?login = \"$DB_USER\"?g" /etc/raddb/mods-available/sql
$SED "s?^#[\t ]*password =.*?password = \"$radiuspwd\"?g" /etc/raddb/mods-available/sql
# no TLS encryption on 127.0.0.1
$SED "s?^[\t ]*ca_file =.*?#&?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*ca_path =.*?#&?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*certificate_file =.*?#&?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*private_key_file =.*?#&?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*cipher =.*?#&?g" /etc/raddb/mods-available/sql
$SED "s?^[\t ]*tls_required =.*?tls_required = no?g" /etc/raddb/mods-available/sql
# queries.conf modifications : case sensitive for username, check simultaneous use, patch on 'postauth' table, etc.
[ -e /etc/raddb/mods-config/sql/main/mysql/queries.conf.default ] || cp /etc/raddb/mods-config/sql/main/mysql/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf.default
cp -f $DIR_CONF/radius/queries.conf /etc/raddb/mods-config/sql/main/mysql/queries.conf
chown -R radius:radius /etc/raddb/mods-config/sql/main/mysql/queries.conf
# sqlcounter modifications
[ -e /etc/raddb/mods-available/sqlcounter.default ] || cp /etc/raddb/mods-available/sqlcounter /etc/raddb/mods-available/sqlcounter.default
cp -f $DIR_CONF/radius/sqlcounter /etc/raddb/mods-available/sqlcounter
chown -R radius:radius /etc/raddb/mods-available/sqlcounter
# make certain that mysql is up before freeradius start
[ -e /lib/systemd/system/radiusd.service.default ] || cp /lib/systemd/system/radiusd.service /lib/systemd/system/radiusd.service.default
$SED "s?^After=.*?After=syslog.target network.target mysqld.service?g" /lib/systemd/system/radiusd.service
/usr/bin/systemctl daemon-reload
# Allow apache to change some conf files (ie : ldap on/off)
chgrp apache /etc/raddb /etc/raddb/sites-available /etc/raddb/mods-available
chmod 750 /etc/raddb /etc/raddb/sites-available /etc/raddb/mods-available
} # End of freeradius()
#############################################################################
## Function "chilli" ##
## - Creation of the conf file and init file (systemd) for coova-chilli ##
## - Adapt the authentication web page (intercept.php) ##
#############################################################################
chilli()
{
# chilli unit for systemd
cat << EOF > /lib/systemd/system/chilli.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit launches coova-chilli a captive portal
[Unit]
Description=chilli is a captive portal daemon
After=network.target
[Service]
Type=forking
ExecStart=/usr/libexec/chilli start
ExecStop=/usr/libexec/chilli stop
ExecReload=/usr/libexec/chilli reload
PIDFile=/run/chilli.pid
[Install]
WantedBy=multi-user.target
EOF
# init file creation
[ -e /etc/init.d/chilli.default ] || mv /etc/init.d/chilli /etc/init.d/chilli.default
cat <<EOF > /etc/init.d/chilli
#!/bin/sh
#
# chilli CoovaChilli init
#
# chkconfig: 2345 65 35
# description: CoovaChilli
### BEGIN INIT INFO
# Provides: chilli
# Required-Start: network
# Should-Start:
# Required-Stop: network
# Should-Stop:
# Default-Start: 2 3 5
# Default-Stop:
# Description: CoovaChilli access controller
### END INIT INFO
[ -f /usr/sbin/chilli ] || exit 0
. /etc/init.d/functions
CONFIG=/etc/chilli.conf
pidfile=/run/chilli.pid
[ -f \$CONFIG ] || {
echo "\$CONFIG Not found"
exit 0
}
current_users_file="/var/tmp/havp/current_users.txt" # file containing active users
RETVAL=0
prog="chilli"
case \$1 in
start)
if [ -f \$pidfile ] ; then
gprintf "chilli is already running"
else
gprintf "Starting \$prog: "
echo '' > \$current_users_file && chown apache:apache \$current_users_file
rm -f /run/chilli* # cleaning
/usr/sbin/modprobe tun >/dev/null 2>&1
echo 1 > /proc/sys/net/ipv4/ip_forward
[ -e /dev/net/tun ] || {
(cd /dev;
mkdir net;
cd net;
mknod tun c 10 200)
}
ifconfig $INTIF 0.0.0.0
/usr/sbin/ethtool -K $INTIF gro off
daemon /usr/sbin/chilli -c \$CONFIG --pidfile=\$pidfile &
RETVAL=\$?
fi
;;
reload)
killall -HUP chilli
;;
restart)
\$0 stop
sleep 2
\$0 start
;;
status)
status chilli
RETVAL=0
;;
stop)
if [ -f \$pidfile ] ; then
gprintf "Shutting down \$prog: "
killproc /usr/sbin/chilli
RETVAL=\$?
[ \$RETVAL = 0 ] && rm -f \$pidfile
[ -e \$current_users_file ] && rm -f \$current_users_file
else
gprintf "chilli is not running"
fi
;;
*)
echo "Usage: \$0 {start|stop|restart|reload|status}"
exit 1
esac
echo
EOF
chmod a+x /etc/init.d/chilli
ln -s /etc/init.d/chilli /usr/libexec/chilli
# conf file creation
[ -e /etc/chilli.conf.default ] || cp /etc/chilli.conf /etc/chilli.conf.default
#NTP Option configuration for DHCP
#DHCP Options : rfc2132
#dhcp option value will be convert in hexa.
#NTP option (or 'option 42') is like :
#
# Code Len Address 1 Address 2
# +-----+-----+-----+-----+-----+-----+-----+-----+--
# | 42 | n | a1 | a2 | a3 | a4 | a1 | a2 | ...
# +-----+-----+-----+-----+-----+-----+-----+-----+--
#
#Code : 42 => 2a
#Len : 4 => 04
PRIVATE_IP_HEXA=$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f1)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f2)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f3)")$(printf "%02x\n" "$(echo $PRIVATE_IP | cut -d'.' -f4)")
cat <<EOF > /etc/chilli.conf
# coova config for ALCASAR
cmdsocket /run/chilli.sock
unixipc chilli.$INTIF.ipc
pidfile /run/chilli.pid
net $PRIVATE_NETWORK_MASK
dhcpif $INTIF
ethers $DIR_DEST_ETC/alcasar-ethers
#nodynip
#statip
dynip $PRIVATE_NETWORK_MASK
domain $DOMAIN
dns1 $PRIVATE_IP
dns2 $PRIVATE_IP
uamlisten $PRIVATE_IP
uamport 3990
uamuiport 3991
macauth
macpasswd password
strictmacauth
locationname $HOSTNAME.$DOMAIN
radiusserver1 127.0.0.1
radiusserver2 127.0.0.1
radiussecret $secretradius
radiusauthport 1812
radiusacctport 1813
uamserver http://$HOSTNAME.$DOMAIN/intercept.php
redirurl
radiusnasid $HOSTNAME.$DOMAIN
uamsecret $secretuam
uamallowed $HOSTNAME,$HOSTNAME.$DOMAIN
coaport 3799
conup $DIR_DEST_BIN/alcasar-conup.sh
condown $DIR_DEST_BIN/alcasar-condown.sh
macup $DIR_DEST_BIN/alcasar-macup.sh
include $DIR_DEST_ETC/alcasar-uamallowed
include $DIR_DEST_ETC/alcasar-uamdomain
dhcpopt 2a04$PRIVATE_IP_HEXA
#dhcpgateway none
#dhcprelayagent none
#dhcpgatewayport none
sslkeyfile /etc/pki/tls/private/alcasar.key
sslcertfile /etc/pki/tls/certs/alcasar.crt
#redirssl
#uamuissl
EOF
# create files for "DHCP static ip" and "DHCP static ip info". Reserve the second IP address for INTIF (the first one is for tun0)
echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers
echo "$PRIVATE_MAC $PRIVATE_SECOND_IP" > $DIR_DEST_ETC/alcasar-ethers-info
# create files for trusted domains and urls
touch $DIR_DEST_ETC/alcasar-uamallowed $DIR_DEST_ETC/alcasar-uamdomain
chown root:apache $DIR_DEST_ETC/alcasar-*
chmod 660 $DIR_DEST_ETC/alcasar-*
# Configuration des fichier WEB d'interception (secret partagé avec coova-chilli)
$SED "s?^\$uamsecret =.*?\$uamsecret = \"$secretuam\";?g" $DIR_WEB/intercept.php
# user 'chilli' creation (in order to run conup/off and up/down scripts
chilli_exist=`grep -c ^chilli: /etc/passwd`
if [ "$chilli_exist" == "1" ]
then
userdel -r chilli 2>/dev/null
fi
groupadd -f chilli
useradd -r -g chilli -s /bin/false -c "system user for coova-chilli" chilli
} # End of chilli()
################################################################
## Function "e2guardian" ##
## - Set the parameters of this HTML proxy (as controler) ##
################################################################
e2guardian()
{
# Adapt systemd unit
[ -e /lib/systemd/system/e2guardian.service.default ] || cp /lib/systemd/system/e2guardian.service /lib/systemd/system/e2guardian.service.default
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/e2guardian -c /etc/e2guardian/e2guardian.conf?g" /lib/systemd/system/e2guardian.service
$SED "s?^After=.*?After=network.target chilli.service?g" /lib/systemd/system/e2guardian.service
[ -e $DIR_DG/e2guardian.conf.default ] || cp $DIR_DG/e2guardian.conf $DIR_DG/e2guardian.conf.default
# Adapt the main conf file
# French deny HTML page
$SED "s?^language =.*?language = 'french'?g" $DIR_DG/e2guardian.conf
# Listen only on LAN side
$SED "s?^filterip.*?filterip = $PRIVATE_IP?g" $DIR_DG/e2guardian.conf
# E2guardian listens on 8080 (HTTP)
$SED "s?^filterports =.*?filterports = 8080?g" $DIR_DG/e2guardian.conf
# E2guardian listens transparently on 8443 (HTTPS)
$SED "s?^transparenthttpsport =.*?transparenthttpsport = 8443?g" $DIR_DG/e2guardian.conf
# DG send its flow to HAVP (127.0.0.1:8090)
$SED "s?^#proxyip.*?proxyip = 127.0.0.1?g" $DIR_DG/e2guardian.conf
$SED "s?^#proxyport.*?proxyport = 8090?g" $DIR_DG/e2guardian.conf
# Don't log
$SED "s?^loglevel =.*?loglevel = 0?g" $DIR_DG/e2guardian.conf
# Disable HTML content control (weighted & banned)
$SED "s?^weightedphrasemode =.*?weightedphrasemode = 0?g" $DIR_DG/e2guardian.conf
cp $DIR_DG/lists/bannedphraselist $DIR_DG/lists/bannedphraselist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedphraselist # (comment what is not)
# Disable URL control with regex
cp $DIR_DG/lists/bannedregexpurllist $DIR_DG/lists/bannedregexpurllist.default
$SED "s?^[^#]?#&?g" $DIR_DG/lists/bannedregexpurllist # (comment what is not)
# Adapt the first group file (only one for instance)
[ -e $DIR_DG/e2guardianf1.conf.default ] || cp $DIR_DG/e2guardianf1.conf $DIR_DG/e2guardianf1.conf.default
# Reporting (deny page) in HTML
$SED "s/^reportinglevel =.*/reportinglevel = 3/g" $DIR_DG/e2guardianf1.conf
# Replace the default deny HTML page (only fr & uk) --> !!! search why our pages make the server crash...
# [ -e /usr/share/e2guardian/languages/french/template.html.default ] || mv /usr/share/e2guardian/languages/french/template.html /usr/share/e2guardian/languages/french/template.html.default
# cp -f $DIR_CONF/template-fr.html /usr/share/e2guardian/languages/french/template.html
# [ -e /usr/share/e2guardian/languages/ukenglish/template.html.default ] || mv /usr/share/e2guardian/languages/ukenglish/template.html /usr/share/e2guardian/languages/ukenglish/template.html.default
# cp -f $DIR_CONF/template.html /usr/share/e2guardian/languages/ukenglish/template.html
# Dont filtering files by extension or mime-type (empty list)
[ -e $DIR_DG/lists/bannedextensionlist.default ] || mv $DIR_DG/lists/bannedextensionlist $DIR_DG/lists/bannedextensionlist.default
touch $DIR_DG/lists/bannedextensionlist
[ -e $DIR_DG/lists/bannedmimetypelist.default ] || mv $DIR_DG/lists/bannedmimetypelist $DIR_DG/lists/bannedmimetypelist.default
touch $DIR_DG/lists/bannedmimetypelist
# Empty LAN IP list that won't be WEB filtered
[ -e $DIR_DG/lists/exceptioniplist.default ] || mv $DIR_DG/lists/exceptioniplist $DIR_DG/lists/exceptioniplist.default
touch $DIR_DG/lists/exceptioniplist
# Creation of ALCASAR banned site list
[ -e $DIR_DG/lists/bannedsitelist.default ] || mv $DIR_DG/lists/bannedsitelist $DIR_DG/lists/bannedsitelist.default
cat <<EOF > $DIR_DG/lists/bannedsitelist
# E2guardian filter config for ALCASAR
# In ALCASAR E2guardian filters only URLs (domains are filtered with unbound)
# block all sites except those in the exceptionsitelist --> liste blanche (désactivée)
#**
# block all SSL and CONNECT tunnels
**s
# block all SSL and CONNECT tunnels specified only as an IP
*ips
# block all sites specified only by an IP
*ip
EOF
# Creation of ALCASAR empty banned URLs list (filled later with Toulouse BL --> see BL function)
[ -e $DIR_DG/lists/bannedurllist.default ] || mv $DIR_DG/lists/bannedurllist $DIR_DG/lists/bannedurllist.default
cat <<EOF > $DIR_DG/lists/bannedurllist
# E2guardian filter config for ALCASAR
EOF
# Creation of files for rehabilited domains and urls
[ -e $DIR_DG/lists/exceptionsitelist.default ] || mv $DIR_DG/lists/exceptionsitelist $DIR_DG/lists/exceptionsitelist.default
[ -e $DIR_DG/lists/exceptionurllist.default ] || mv $DIR_DG/lists/exceptionurllist $DIR_DG/lists/exceptionurllist.default
touch $DIR_DG/lists/exceptionsitelist
touch $DIR_DG/lists/exceptionurllist
# Add Bing to the safesearch url regext list (parental control)
[ -e $DIR_DG/lists/urlregexplist.default ] || cp $DIR_DG/lists/urlregexplist $DIR_DG/lists/urlregexplist.default
cat <<EOF >> $DIR_DG/lists/urlregexplist
# Bing - add 'adlt=strict'
#"(^http://[0-9a-z]+\.bing\.[a-z]+[-/%.0-9a-z]*\?)(.*)"->"\1\2&adlt=strict"
EOF
# 'Safesearch' regex actualisation
$SED "s?images?search?g" $DIR_DG/lists/urlregexplist
# change the google safesearch ("safe=strict" instead of "safe=vss")
$SED "s?safe=vss?safe=strict?g" $DIR_DG/lists/urlregexplist
# create log folder
mkdir -p /var/log/e2guardian
chown -R e2guardian /etc/e2guardian /var/log/e2guardian
} # End of e2guardian()
##################################################################
## Function "antivirus" ##
## - Set the parameters of havp, libclamav and freshclam ##
##################################################################
antivirus()
{
# create 'havp' user
havp_exist=`grep -c ^havp: /etc/passwd`
if [ "$havp_exist" == "1" ]
then
userdel -r havp 2>/dev/null
groupdel havp 2>/dev/null
fi
groupadd -f havp
useradd -r -g havp -s /bin/false -c "system user for havp (antivirus proxy)" havp
mkdir -p /var/tmp/havp /var/log/havp /run/havp /var/log/clamav /var/lib/clamav
chown -R havp:havp /var/tmp/havp /var/log/havp /run/havp
chown -R clamav:clamav /var/log/clamav /var/lib/clamav
[ -e /etc/havp/havp.config.default ] || cp /etc/havp/havp.config /etc/havp/havp.config.default
$SED "/^REMOVETHISLINE/d" /etc/havp/havp.config
$SED "s?^# PIDFILE.*?PIDFILE /run/havp/havp.pid?g" /etc/havp/havp.config # pidfile
$SED "s?^# TRANSPARENT.*?TRANSPARENT false?g" /etc/havp/havp.config # transparent mode
$SED "s?^# BIND_ADDRESS.*?BIND_ADDRESS 127.0.0.1?g" /etc/havp/havp.config # we listen only on loopback
$SED "s?^# PORT.*?PORT 8090?g" /etc/havp/havp.config # datas come on port 8090 (on loopback)
$SED "s?^# TIMEFORMAT.*?TIMEFORMAT %Y %b %d %H:%M:%S?g" /etc/havp/havp.config # Log format
$SED "s?^ENABLECLAMLIB.*?ENABLECLAMLIB true?g" /etc/havp/havp.config # active libclamav AV
$SED "s?^# LOG_OKS.*?LOG_OKS false?g" /etc/havp/havp.config # log only when malware matches
$SED "s?^# SERVERNUMBER.*?SERVERNUMBER 10?g" /etc/havp/havp.config # 10 daemons are started simultaneously
$SED "s?^# SCANIMAGES.*?SCANIMAGES false?g" /etc/havp/havp.config # doesn't scan image files
$SED "s?^# SKIPMIME.*?SKIPMIME image\/\* video\/\* audio\/\*?g" /etc/havp/havp.config # doesn't scan some multimedia files
$SED "s?^# SCANTEMPFILE.*?SCANTEMPFILE /var/tmp/havp/havp-XXXXXX?g" /etc/havp/havp.config # Use our special tmp FS (memfs)
$SED "s?^# TEMPDIR.*?TEMPDIR /var/tmp/havp?g" /etc/havp/havp.config # Use our special tmp FS (memfs)
# skip checking of youtube flow (too heavy load / risk too low)
[ -e /etc/havp/whitelist.default ] || cp /etc/havp/whitelist /etc/havp/whitelist.default
echo "# Whitelist youtube flow" >> /etc/havp/whitelist
echo "*.youtube.com/*" >> /etc/havp/whitelist
# adapt init script and systemd unit
[ -e /etc/init.d/havp.default ] || cp /etc/init.d/havp /etc/init.d/havp.default
cp -f $DIR_CONF/havp-init /etc/init.d/havp
cp -f $DIR_CONF/havp.service /lib/systemd/system/
# replace of the intercept page (template)
cp -f $DIR_CONF/virus-fr.html /etc/havp/templates/fr/virus.html
cp -f $DIR_CONF/virus-en.html /etc/havp/templates/en/virus.html
# update virus database every 4 hours (24h/6)
[ -e /etc/freshclam.conf.default ] || cp /etc/freshclam.conf /etc/freshclam.conf.default
$SED "s?^Checks.*?Checks 6?g" /etc/freshclam.conf
$SED "s?^NotifyClamd.*?# NotifyClamd /etc/clamd.conf?g" /etc/freshclam.conf
$SED "/^DatabaseMirror/a DatabaseMirror db.fr.clamav.net" /etc/freshclam.conf
$SED "s?MaxAttempts.*?MaxAttempts 3?g" /etc/freshclam.conf
# update now
/usr/bin/freshclam --no-warnings --quiet
} # End of antivirus()
################################################################################
## Function "tinyproxy" ##
## - Set the parameters of tinyproxy (proxy between filtered users and havp) ##
################################################################################
tinyproxy()
{
tinyproxy_exist=`grep -c ^tinyproxy: /etc/passwd`
if [ "$tinyproxy_exist" == "1" ]
then
userdel -r tinyproxy 2>/dev/null
groupdel tinyproxy 2>/dev/null
fi
groupadd -f tinyproxy
useradd -r -g tinyproxy -s /bin/false -c "system user for tinyproxy" tinyproxy
mkdir -p /run/tinyproxy /var/log/tinyproxy
chown -R tinyproxy.tinyproxy /run/tinyproxy /var/log/tinyproxy
[ -e /etc/tinyproxy/tinyproxy.conf.default ] || cp /etc/tinyproxy/tinyproxy.conf /etc/tinyproxy/tinyproxy.conf.default
$SED "s?^User.*?User tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^Group.*?Group tinyproxy?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^Port.*?Port 8090?g" /etc/tinyproxy/tinyproxy.conf # Listen Port
$SED "s?^#Listen.*?Listen $PRIVATE_IP?g" /etc/tinyproxy/tinyproxy.conf # Listen NIC (only intif)
$SED "s?^#LogFile.*?LogFile \"/var/log/tinyproxy/tinyproxy.log\"?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^#PidFile.*?PidFile \"/run/tinyproxy/tinyproxy.pid\"?g" /etc/tinyproxy/tinyproxy.conf
$SED "s?^LogLevel.*?LogLevel Error?g" /etc/tinyproxy/tinyproxy.conf # Only errors are logged
$SED "s?^#Upstream.*?Upstream http 127.0.0.1:8090?g" /etc/tinyproxy/tinyproxy.conf # forward to HAVP
$SED "s?^#DisableViaHeader.*?DisableViaHeader Yes?g" /etc/tinyproxy/tinyproxy.conf # Stealth mode
$SED "s?^Allow.*?Allow $PRIVATE_NETWORK_MASK?g" /etc/tinyproxy/tinyproxy.conf # Allow from LAN
# Create the systemd unit
cat << EOF > /lib/systemd/system/tinyproxy.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit launches tinyproxy (a very light proxy).
# The "sleep 2" is needed because the pid file isn't ready for systemd
[Unit]
Description=Tinyproxy Web Proxy Server
After=network-online.target iptables.service
[Service]
Type=forking
ExecStartPre=/bin/chown -R tinyproxy.tinyproxy /run/tinyproxy /var/log/tinyproxy
ExecStartPre=/bin/sleep 2
PIDFile=/run/tinyproxy/tinyproxy.pid
ExecStart=/usr/sbin/tinyproxy -c /etc/tinyproxy/tinyproxy.conf
ExecStop=/usr/bin/killall -9 tinyproxy
[Install]
WantedBy=multi-user.target
EOF
} # end of tinyproxy()
##############################################################
## function "ulogd" ##
## - Ulog config for multi-log files ##
##############################################################
ulogd()
{
# Three instances of ulogd (three different logfiles)
[ -d /var/log/firewall ] || mkdir -p /var/log/firewall
nl=1
for log_type in traceability ssh ext-access
do
[ -e /lib/systemd/system/ulogd-$log_type.service ] || cp -f /lib/systemd/system/ulogd.service /lib/systemd/system/ulogd-$log_type.service
[ -e /var/log/firewall/$log_type.log ] || echo "" > /var/log/firewall/$log_type.log
cp -f $DIR_CONF/ulogd-sample.conf /etc/ulogd-$log_type.conf
$SED "s?^group=.*?group=$nl?g" /etc/ulogd-$log_type.conf
cat << EOF >> /etc/ulogd-$log_type.conf
[emu1]
file="/var/log/firewall/$log_type.log"
sync=1
EOF
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/ulogd -u ulogd -c /etc/ulogd-$log_type.conf $ULOGD_OPTIONS?g" /lib/systemd/system/ulogd-$log_type.service
nl=`expr $nl + 1`
done
chown -R root:apache /var/log/firewall
chmod 750 /var/log/firewall
chmod 640 /var/log/firewall/*
} # End of ulogd()
##########################################################
## Function "nfsen" ##
## - configure NetFlow collector (nfcapd) ##
## - configure NetFlow grapher (nfsen-ng) ##
##########################################################
nfsen()
{
groupadd -f nfcapd
useradd -r -g nfcapd -s /bin/false -c "system user for nfcapd" nfcapd
# nfcapd unit for systemd
cat << EOF > /lib/systemd/system/nfcapd.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit launches nfcapd (a Netflow collector).
[Unit]
Description=Netflow Capture Daemon
After=network-online.target iptables.service
[Service]
Type=exec
ExecStartPre=/bin/mkdir -p /run/nfcapd
ExecStartPre=/bin/chown nfcapd:nfcapd /run/nfcapd
PIDFile=/run/nfcapd/nfcapd.pid
ExecStart=/usr/bin/nfcapd -w -D -b 127.0.0.1 -p 2055 -u nfcapd -g nfcapd -B 200000 -t 300 -S 7 -z -P /run/nfcapd/nfcapd.pid -I alcasar_netflow -l /var/log/nfsen/profile-data/live/alcasar_netflow
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
EOF
[ -d /var/log/nfsen/profile-data/live/alcasar_netflow ] || mkdir -p /var/log/nfsen/profile-data/live/alcasar_netflow
[ -d /run/nfcapd ] || mkdir -p /run/nfcapd
chown -R nfcapd:nfcapd /var/log/nfsen /run/nfcapd
} # End of nfsen()
###########################################################
## Function "vnstat" ##
## - Initialization of vnstat and vnstat-dashboard ##
###########################################################
vnstat()
{
# vnstat
[ -e /etc/vnstat.conf.default ] || cp /etc/vnstat.conf /etc/vnstat.conf.default
$SED "s?^Interface.*?Interface \"$EXTIF\"?g" /etc/vnstat.conf
$SED "s?^DatabaseDir.*?DatabaseDir /var/log/vnstat?g" /etc/vnstat.conf
# vnstat-dashboard
$SED "s?^\$thisInterface.*?\$thisInterface = \"$EXTIF\";?" $DIR_ACC/manager/vnstat/index.php
} # End of vnstat()
###################################################################
## Function "dnsmasq" ##
## - creation of the conf files of dnsmasq (whitelist for ipset )##
###################################################################
dnsmasq()
{
[ -d /var/log/dnsmasq ] || mkdir /var/log/dnsmasq
[ -e /etc/dnsmasq.conf.default ] || mv /etc/dnsmasq.conf /etc/dnsmasq.conf.default
# dnsmasq listen on udp 55 ("dnsmasq with whitelist")
cat << EOF > /etc/dnsmasq-whitelist.conf
# Configuration file for "dnsmasq with whitelist"
# ADD Toulouse university whitelist domains
pid-file=/run/dnsmasq-whitelist.pid
listen-address=127.0.0.1
port=55
no-dhcp-interface=lo
bind-interfaces
cache-size=1024
domain-needed
expand-hosts
bogus-priv
filterwin2k
ipset=/#/wl_ip_allowed # dynamically add the resolv IP address in the Firewall rules
server=$DNS1
server=$DNS2
EOF
# Create dnsmasq-whitelist unit
mv /lib/systemd/system/dnsmasq.service /lib/systemd/system/dnsmasq.service.default
cp /lib/systemd/system/dnsmasq.service.default /lib/systemd/system/dnsmasq-whitelist.service
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/dnsmasq -C /etc/dnsmasq-whitelist.conf?g" /lib/systemd/system/dnsmasq-whitelist.service
$SED "s?^PIDFile=.*?PIDFile=/run/dnsmasq-whitelist.pid?g" /lib/systemd/system/dnsmasq-whitelist.service
} # End of dnsmasq()
#########################################################
## Function "unbound" ##
## - create the conf files for 4 unbound services ##
## - create the systemd files for 4 unbound services ##
#########################################################
unbound ()
{
[ -d /etc/unbound/conf.d ] || mkdir -p /etc/unbound/conf.d
[ -d /etc/unbound/conf.d/common ] || mkdir /etc/unbound/conf.d/common
[ -d /etc/unbound/conf.d/common/local-forward ] || mkdir /etc/unbound/conf.d/common/local-forward
[ -d /etc/unbound/conf.d/common/local-dns ] || mkdir /etc/unbound/conf.d/common/local-dns
[ -d /etc/unbound/conf.d/forward ] || mkdir /etc/unbound/conf.d/forward
[ -d /etc/unbound/conf.d/blacklist ] || mkdir /etc/unbound/conf.d/blacklist
[ -d /etc/unbound/conf.d/whitelist ] || mkdir /etc/unbound/conf.d/whitelist
[ -d /etc/unbound/conf.d/blackhole ] || mkdir /etc/unbound/conf.d/blackhole
[ -d /var/log/unbound ] || { mkdir /var/log/unbound; chown unbound:unbound /var/log/unbound; }
[ -e /etc/unbound/unbound.conf.default ] || cp /etc/unbound/unbound.conf /etc/unbound/unbound.conf.default
# Local static DNS configuration
[ -e /etc/unbound/conf.d/common/local-dns/global.conf ] || touch /etc/unbound/conf.d/common/local-dns/global.conf
# Forward zone configuration file for all unbound dns servers
cat << EOF > /etc/unbound/conf.d/common/forward-zone.conf
forward-zone:
name: "."
forward-addr: $DNS1
forward-addr: $DNS2
EOF
# Custom configuration file for manual DNS configuration
cat << EOF > /etc/unbound/conf.d/common/local-forward/custom.conf
## Ajouter un bloc pour chaque nom de domaine géré par un autre seveur DNS
## Add one block for each domain name managed by an other DNS server
##
## Example:
##
## server:
## local-zone: "<your_domain>." transparent
## forward-zone:
## name: "<your_domain>."
## forward-addr: <@IP_domain_server>
##
## INFO : local hostnames are resolved in /etc/hosts file
EOF
# Configuration file of ALCASAR main domains for $INTIF
cat << EOF > /etc/unbound/conf.d/common/local-dns/${INTIF}.conf
server:
local-zone: "$HOSTNAME.$DOMAIN" static
local-data: "$HOSTNAME.$DOMAIN A $PRIVATE_IP"
local-zone: "$HOSTNAME" static
local-data: "$HOSTNAME A $PRIVATE_IP"
local-zone: "$DOMAIN." static
local-data: "$DOMAIN. A"
EOF
# Configuration file for lo of forward unbound
cat << EOF > /etc/unbound/conf.d/forward/iface.lo.conf
server:
interface: 127.0.0.1@53
access-control-view: 127.0.0.1/8 lo
view:
name: "lo"
local-zone: "$HOSTNAME.$DOMAIN" static
local-data: "$HOSTNAME.$DOMAIN A 127.0.0.1"
local-zone: "$HOSTNAME" static
local-data: "$HOSTNAME A 127.0.0.1"
view-first: yes
EOF
# Configuration file for $INTIF of forward unbound
cat << EOF > /etc/unbound/conf.d/forward/iface.${INTIF}.conf
server:
interface: ${PRIVATE_IP}@53
access-control-view: $PRIVATE_NETWORK_MASK $INTIF
view:
name: "$INTIF"
local-zone: "$HOSTNAME.$DOMAIN" static
local-data: "$HOSTNAME.$DOMAIN A $PRIVATE_IP"
local-zone: "$HOSTNAME" static
local-data: "$HOSTNAME A $PRIVATE_IP"
view-first: yes
EOF
# Configuration file for forward unbound
cat << EOF > /etc/unbound/unbound.conf
server:
verbosity: 1
hide-version: yes
hide-identity: yes
do-ip6: no
include: /etc/unbound/conf.d/common/forward-zone.conf
include: /etc/unbound/conf.d/common/local-forward/*
include: /etc/unbound/conf.d/common/local-dns/*
include: /etc/unbound/conf.d/forward/*
EOF
# Configuration file for $INTIF of blacklist unbound
cat << EOF > /etc/unbound/conf.d/blacklist/iface.${INTIF}.conf
server:
interface: ${PRIVATE_IP}@54
access-control: $PRIVATE_IP_MASK allow
access-control-tag: $PRIVATE_IP_MASK "blacklist"
access-control-tag-action: $PRIVATE_IP_MASK "blacklist" redirect
access-control-tag-data: $PRIVATE_IP_MASK "blacklist" "A $PRIVATE_IP"
EOF
# Configuration file for blacklist unbound
cat << EOF > /etc/unbound/unbound-blacklist.conf
server:
verbosity: 1
hide-version: yes
hide-identity: yes
do-ip6: no
logfile: "/var/log/unbound/unbound-blacklist.log"
chroot: ""
define-tag: "blacklist"
log-local-actions: yes
include: /etc/unbound/conf.d/common/forward-zone.conf
include: /etc/unbound/conf.d/common/local-forward/*
include: /etc/unbound/conf.d/common/local-dns/*
include: /etc/unbound/conf.d/blacklist/*
include: /usr/local/share/unbound-bl-enabled/*
EOF
# Configuration file for $INTIF of whitelist unbound
cat << EOF > /etc/unbound/conf.d/whitelist/iface.${INTIF}.conf
server:
interface: ${PRIVATE_IP}@55
access-control: $PRIVATE_IP_MASK allow
access-control-tag: $PRIVATE_IP_MASK "whitelist"
access-control-tag-action: $PRIVATE_IP_MASK "whitelist" redirect
access-control-tag-data: $PRIVATE_IP_MASK "whitelist" "A $PRIVATE_IP"
EOF
# Configuration file for whitelist unbound
cat << EOF > /etc/unbound/unbound-whitelist.conf
server:
verbosity: 1
hide-version: yes
hide-identity: yes
do-ip6: no
do-not-query-localhost: no
define-tag: "whitelist"
local-zone: "." transparent
local-zone-tag: "." "whitelist"
include: /usr/local/share/unbound-wl-enabled/*
include: /etc/unbound/conf.d/whitelist/*
include: /etc/unbound/conf.d/common/local-dns/*
include: /etc/unbound/conf.d/common/local-forward/*
forward-zone:
name: "."
forward-addr: 127.0.0.1@55
EOF
# Configuration file for $INTIF of blackhole unbound
cat << EOF > /etc/unbound/conf.d/blackhole/iface.${INTIF}.conf
server:
interface: ${PRIVATE_IP}@56
access-control-view: $PRIVATE_NETWORK_MASK $INTIF
view:
name: "$INTIF"
local-zone: "." redirect
local-data: ". A $PRIVATE_IP"
EOF
# Configuration file for blackhole unbound
cat << EOF > /etc/unbound/unbound-blackhole.conf
server:
verbosity: 1
hide-version: yes
hide-identity: yes
do-ip6: no
include: /etc/unbound/conf.d/blackhole/*
include: /etc/unbound/conf.d/common/local-dns/*
include: /etc/unbound/conf.d/common/local-forward/*
EOF
if [ ! -e /lib/systemd/system/unbound.service.default ]
then
cp -f /lib/systemd/system/unbound.service /lib/systemd/system/unbound.service.default
fi
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/unbound -d -c /etc/unbound/unbound.conf?g" /lib/systemd/system/unbound.service
$SED "s?^After=.*?After=syslog.target network-online.target chilli.service?g" /lib/systemd/system/unbound.service
for list in blacklist blackhole whitelist
do
cp -f /lib/systemd/system/unbound.service /lib/systemd/system/unbound-$list.service
$SED "s?^ExecStart=.*?ExecStart=/usr/sbin/unbound -d -c /etc/unbound/unbound-$list.conf?g" /lib/systemd/system/unbound-$list.service
$SED "s?^PIDFile=.*?PIDFile=/run/unbound-$list.pid?g" /lib/systemd/system/unbound-$list.service
done
$SED "s?^After=.*?After=syslog.target network-online.target chilli.service dnsmasq-whitelist.service?g" /lib/systemd/system/unbound-whitelist.service
} # End of unbound()
##################################################
## Function "dhcpd" ##
##################################################
dhcpd()
{
[ -e /etc/dhcpd.conf.default ] || cp /etc/dhcpd.conf /etc/dhcpd.conf.default
cat <<EOF > /etc/dhcpd.conf
ddns-update-style none;
subnet $PRIVATE_NETWORK netmask $PRIVATE_NETMASK {
option routers $PRIVATE_IP;
option subnet-mask $PRIVATE_NETMASK;
option domain-name-servers $PRIVATE_IP;
range dynamic-bootp $PRIVATE_SECOND_IP $PRIVATE_LAST_IP;
default-lease-time 21600;
max-lease-time 43200;
}
EOF
} # End of dhcpd()
##########################################################
## Function "BL" ##
## - copy & adapt Toulouse BL to ALCASAR architecture ##
## - domain names for unbound-bl & unbound-wl ##
## - URLs for E²guardian ##
## - IPs for NetFilter ##
## - copy additional BLs (TOR + Ultrasurf + C&C) ##
##########################################################
BL()
{
# copy the Toulouse university BL in order to be adapted to ALCASAR architecture (alcasar-bl.sh -adapt)
rm -rf $DIR_DG/lists/blacklists
mkdir -p /tmp/blacklists
cp $DIR_BLACKLIST/blacklists.tar.gz /tmp/blacklists/
# creation of the additional BL and WL categorie named "ossi" (for domain names & ip only)
mkdir -p $DIR_DG/lists/blacklists/ossi-bl
touch $DIR_DG/lists/blacklists/ossi-bl/domains
echo "ossi-bl" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
mkdir -p $DIR_DG/lists/blacklists/ossi-wl
touch $DIR_DG/lists/blacklists/ossi-wl/domains
echo "ossi-wl" >> $DIR_DEST_ETC/alcasar-wl-categories-enabled
# add additional BL files
for x in $(ls $DIR_BLACKLIST | grep -v "^blacklists")
do
mkdir $DIR_DG/lists/blacklists/ossi-bl-$x
cp $DIR_BLACKLIST/$x $DIR_DG/lists/blacklists/ossi-bl-$x/domains
echo "ossi-bl-$x" >> $DIR_DEST_ETC/alcasar-bl-categories-enabled
done
chown -R e2guardian:apache $DIR_DG
chown -R root:apache $DIR_DEST_SHARE
chmod -R g+rw $DIR_DG $DIR_DEST_SHARE
# adapt the Toulouse BL to ALCASAR architecture
$DIR_DEST_BIN/alcasar-bl.sh --adapt
# enable the default categories
$DIR_DEST_BIN/alcasar-bl.sh --cat_choice
rm -rf /tmp/blacklists
} # End of BL()
#######################################################
## Function "cron" ##
## - write all cron & anacron files ##
#######################################################
cron()
{
# 'crontab' with standard cron at midnight instead of 4:0 am (default)
[ -e /etc/crontab.default ] || cp /etc/crontab /etc/crontab.default
cat <<EOF > /etc/crontab
SHELL=/usr/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/
# run-parts
01 * * * * root nice -n 19 run-parts --report /etc/cron.hourly
02 0 * * * root nice -n 19 run-parts --report /etc/cron.daily
22 0 * * 0 root nice -n 19 run-parts --report /etc/cron.weekly
42 0 1 * * root nice -n 19 run-parts --report /etc/cron.monthly
EOF
[ -e /etc/anacrontab.default ] || cp /etc/anacrontab /etc/anacrontab.default
cat <<EOF >> /etc/anacrontab
7 8 cron.MysqlDump nice /etc/cron.d/alcasar-mysql
7 10 cron.logExport nice /etc/cron.d/alcasar-archive
EOF
cat <<EOF > /etc/cron.d/alcasar-mysql
# Verify, repair and export users database (every monday at 4:45 am)
45 4 * * 1 root $DIR_DEST_BIN/alcasar-mysql.sh --dump
# Remove users whose expiration date is exceeded for more more than 7 days (every Monday at 4:40 am)
40 4 * * * root $DIR_DEST_BIN/alcasar-mysql.sh --expire_user 2>&1 >/dev/null
EOF
cat <<EOF > /etc/cron.d/alcasar-archive
# Archiving logs (traceability & users database) (every Monday at 5:35 am)
35 5 * * 1 root $DIR_DEST_BIN/alcasar-archive.sh --now
EOF
cat <<EOF > /etc/cron.d/alcasar-ticket-clean
# Remove password files (created when importing users by CSV files) and user's PDF voucher (every hours at 30')
30 * * * * root $DIR_DEST_BIN/alcasar-ticket-clean.sh
EOF
cat <<EOF > /etc/cron.d/alcasar-distrib-updates
# Update the system (everyday at 3:30 am)
30 3 * * * root /usr/sbin/urpmi --auto-update --auto 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-connections-stats
# Connection stats update (accounting). These Perl scripts are from "dialup_admin" (cf. wiki.freeradius.org/Dialup_admin).
# 'alcasar-tot_stats' : aggregate the daily connections of users and write it in the table 'totacct' (everyday at 1:01 pm)
# 'alcasar-monthly_tot_stat' : aggregate the monthly connections of users and write it in table 'mtotacct' (everyday at 1h05 pm)
# 'alcasar-truncate_raddact' : remove the user' session log older than 365 days (applying French law : "LCEN") (every month, the first at 01:10 pm)
# 'alcasar-clean_radacct' : close the sessions openned for more than 30 days (every month, the first at 01:15 pm)
# 'alcasar-activity_report.sh' : generate an activity report in PDF (every sunday at 5:35 pm)
1 1 * * * root $DIR_DEST_BIN/alcasar-tot_stats > /dev/null 2>&1
5 1 * * * root $DIR_DEST_BIN/alcasar-monthly_tot_stats > /dev/null 2>&1
10 1 1 * * root $DIR_DEST_BIN/alcasar-truncate_radacct > /dev/null 2>&1
15 1 1 * * root $DIR_DEST_BIN/alcasar-clean_radacct > /dev/null 2>&1
35 5 * * 0 root $DIR_DEST_BIN/alcasar-activity_report.sh > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-watchdog
# 'alcasar-watchdog.sh' : run the "watchdog" (every 10')
# 'alcasar-flush_ipset_wl.sh' : empty the IPSET of the whitelisted IP loaded dynamically with dnsmasq-whitelist hook (every sunday at 0:05 am)
# 'alcasar-watchdog-hl.sh' : (optionnaly) remove the IP 0.0.0.0 from chilli cache memory
*/10 * * * * root $DIR_DEST_BIN/alcasar-watchdog.sh > /dev/null 2>&1
0 5 * * 0 root $DIR_DEST_BIN/alcasar-flush_ipset_wl.sh > /dev/null 2>&1
#* * * * * root $DIR_DEST_BIN/alcasar-watchdog-hl.sh > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-daemon-watchdog
# start dead daemons (after boot process and every 18')
@reboot root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
*/18 * * * * root $DIR_DEST_BIN/alcasar-daemon.sh > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-rsync-bl
# Automatic update the BL (every 12 hours). The enabled categories are listed in '/usr/local/etc/update_cat.conf' (no sync if empty).
0 */12 * * * root $DIR_DEST_BIN/alcasar-bl-autoupdate.sh --update_cat > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-rsync-ossi_bl
# Automatic update the OSSI BLs (every 12 hours) by running the custom update scripts specified in '/usr/local/etc/update_ossi_cat.conf'.
0 */12 * * * root /bin/bash /usr/local/etc/update_ossi_cat.conf > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-letsencrypt
# Automatic renew the Let's Encrypt certificate (daily --> see "cron.daily")
@daily root $DIR_DEST_BIN/alcasar-letsencrypt.sh --cron > /dev/null 2>&1
EOF
cat <<EOF > /etc/cron.d/alcasar-nfcapd-expire
# Remove netflow files older than one year
@daily root /usr/bin/nfexpire -e /var/log/nfsen/profile-data/live/alcasar_netflow -t 365d
EOF
# removing the users crons
rm -f /var/spool/cron/*
} # End of cron()
######################################################################
## Fonction "Fail2Ban" ##
##- Adapt conf file to ALCASAR ##
##- Secure items : DDOS, SSH-Brute-Force, Intercept.php Brute-Force ##
######################################################################
fail2ban()
{
/usr/bin/sh $DIR_CONF/fail2ban.sh
# allow reading of 2 log files (fail2ban & watchdog). HAVP is treated in its section
[ -e /var/log/fail2ban.log ] || /usr/bin/touch /var/log/fail2ban.log
[ -e /var/Save/security/watchdog.log ] || /usr/bin/touch /var/Save/security/watchdog.log
chmod 644 /var/log/fail2ban.log
chmod 644 /var/Save/security/watchdog.log
/usr/bin/touch /var/log/auth.log
# fail2ban unit
[ -e /lib/systemd/system/fail2ban.service.default ] || cp /lib/systemd/system/fail2ban.service /lib/systemd/system/fail2ban.service.default
$SED '/ExecStart=/a\ExecStop=/usr/bin/fail2ban-client stop' /usr/lib/systemd/system/fail2ban.service
$SED '/Type=/a\PIDFile=/run/fail2ban/fail2ban.pid' /usr/lib/systemd/system/fail2ban.service
$SED '/After=*/c After=syslog.target network.target lighttpd.service' /usr/lib/systemd/system/fail2ban.service
} # End of fail2ban()
#########################################################
## Fonction "gammu_smsd" ##
## - Creating of SMS management database ##
## - Write the gammu a gammu_smsd conf files ##
#########################################################
gammu_smsd()
{
# Create 'gammu' system user
groupadd -f gammu_smsd
useradd --system -g gammu_smsd -s /bin/false -c "system user for gammu_smsd" gammu_smsd
usermod -a -G dialout gammu_smsd
# Create 'gammu' database
MYSQL="/usr/bin/mysql -uroot -p$mysqlpwd --execute"
$MYSQL "CREATE DATABASE IF NOT EXISTS $DB_GAMMU; GRANT ALL ON $DB_GAMMU.* TO $DB_USER@localhost IDENTIFIED BY '$radiuspwd'; FLUSH PRIVILEGES;"
# Add a gammu database structure
/usr/bin/mysql -u$DB_USER -p$radiuspwd $DB_GAMMU < $DIR_CONF/empty-gammu-smsd-db.sql
# Config file for the gammu_smsd daemon & gammu (ttyUSB0 as default com port)
cat << EOF > /etc/gammurc
[gammu]
device = /dev/ttyUSB0
connection = at115200
EOF
cat << EOF > /etc/gammu_smsd_conf
[gammu]
port = /dev/ttyUSB0
connection = at115200
[smsd]
PIN = 1234
logfile = /var/log/gammu-smsd/gammu-smsd.log
logformat = textall
debuglevel = 0
service = sql
driver = native_mysql
user = $DB_USER
password = $radiuspwd
pc = localhost
database = $DB_GAMMU
RunOnReceive = sudo $DIR_DEST_BIN/alcasar-sms.sh --new_sms
StatusFrequency = 30
;LoopSleep = 2
;ResetFrequency = 300
;HardResetFrequency = 120
CheckSecurity = 1
CheckSignal = 1
CheckBattery = 0
EOF
chmod 755 /etc/gammu_smsd_conf /etc/gammurc
# Create the systemd unit
cat << EOF > /lib/systemd/system/gammu-smsd.service
[Unit]
Description=SMS daemon for Gammu
Documentation=man:gammu-smsd(1)
After=network.target mysql.service
[Service]
Type=forking
ExecStart=/usr/bin/gammu-smsd --config /etc/gammu_smsd_conf --user=gammu_smsd --group=gammu_smsd --pid=/run/gammu-smsd.pid --daemon
ExecReload=/bin/kill -HUP $MAINPID
ExecStopPost=/bin/rm -f /run/gammu-smsd.pid
PIDFile=/run/gammu-smsd.pid
[Install]
WantedBy=multi-user.target
EOF
# Log folder for gammu-smsd
[ -d /var/log/gammu-smsd ] || mkdir /var/log/gammu-smsd
chmod 755 /var/log/gammu-smsd
# Udev rule for Modeswitch (switch from "mass_storage" mode to "ttyUSB" modem) needed with some Huawei MODEM (idVendor: 12d1)
# normally not needed now since modeswitch is managed by udev (see Mageia RPM)
#cat << EOF > /lib/udev/rules.d/66-huawei.rules
#KERNEL=="ttyUSB0",ATTRS{idVendor}=="12d1",RUN+="$DIR_DEST_BIN/alcasar-sms.sh --mode"
#EOF
# Udev rule for fixing the enumeration of ttyUSB port on some MODEM (when they switch randomly the order of their ports at boot time)
# example : http://hintshop.ludvig.co.nz/show/persistent-names-usb-serial-devices/
} # End of gammu_smsd()
############################################################
## Fonction "msec" ##
## - Apply the "fileserver" security level ##
## - remove the "system request" for rebboting ##
## - Fix several file permissions ##
############################################################
msec()
{
# Apply fileserver security level
[ -e /etc/security/msec/security.conf.default ] || cp /etc/security/msec/security.conf /etc/security/msec/security.conf.default
echo "BASE_LEVEL=fileserver" > /etc/security/msec/security.conf
# Set permissions monitoring and enforcement
cat <<EOF > /etc/security/msec/perm.local
/var/log/firewall/ root.apache 750
/var/log/firewall/* root.apache 640
/etc/security/msec/perm.local root.root 640
/etc/security/msec/level.local root.root 640
/etc/freeradius-web root.apache 750
/etc/freeradius-web/admin.conf root.apache 640
/etc/raddb/client.conf radius.radius 640
/etc/raddb/radius.conf radius.radius 640
/etc/raddb/mods-available/ldap radius.apache 660
/etc/raddb/sites-available/alcasar radius.apache 660
/etc/pki/CA/ root.apache 750
/etc/pki/CA/* root.apache 640
/etc/pki/CA/private/ root.root 700
/etc/pki/CA/private/* root.root 600
/etc/pki/tls/private/ root.apache 750
/etc/pki/tls/private/* root.apache 640
/var/log/netflow/porttracker root.apache 770
/var/log/netflow/porttracker/* root.apache 660
EOF
# apply now hourly & daily checks
/usr/sbin/msec
/etc/cron.weekly/msec
} # End of msec()
##################################################################
## Fonction "letsencrypt" ##
## - Install Let's Encrypt client ##
## - Prepare Let's Encrypt ALCASAR configuration file ##
##################################################################
letsencrypt()
{
echo "Installing Let's Encrypt client..."
# Remove potential old installers
rm -rf /tmp/acme.sh-*
# Extract acme.sh
tar xzf ./conf/letsencrypt-client/acme.sh-*.tar.gz -C /tmp/
pwdInstall=$(pwd)
cd /tmp/acme.sh-* || { echo "Unable to find ACME directory"; exit 1; }
acmesh_installDir="/opt/acme.sh"
acmesh_confDir="/usr/local/etc/letsencrypt"
acmesh_userAgent="ALCASAR"
# Install acme.sh
./acme.sh --install \
--home $acmesh_installDir \
--config-home $acmesh_confDir/data \
--certhome $acmesh_confDir/certs \
--accountkey $acmesh_confDir/ca/account.key \
--accountconf $acmesh_confDir/data/account.conf \
--useragent $acmesh_userAgent \
--nocron \
> /dev/null
if [ $? -ne 0 ]; then
echo "Error during installation of Let's Encrypt client (acme.sh)."
fi
# Create configuration file
cat <<EOF > /usr/local/etc/alcasar-letsencrypt
email=
dateIssueRequest=
domainRequest=
challenge=
dateIssued=
dnsapi=
dateNextRenewal=
EOF
cd $pwdInstall || { echo "Unable to find $pwdInstall directory"; exit 1; }
rm -rf /tmp/acme.sh-*
} # End of letsencrypt()
##################################################################
## Fonction "post_install" ##
## - Modifying banners (locals et ssh) & prompts ##
## - SSH config ##
## - sudoers config & files security ##
## - log rotate & ANSSI security parameters ##
## - Apply former conf in case of an update ##
##################################################################
post_install()
{
# change the SSH banner
cp -f $DIR_CONF/banner /etc/ssh/alcasar-banner-ssh
echo " V$VERSION" >> /etc/ssh/alcasar-banner-ssh
chmod 644 /etc/ssh/alcasar-banner-ssh ; chown root:root /etc/ssh/alcasar-banner-ssh
[ -e /etc/ssh/sshd_config.default ] || cp /etc/ssh/sshd_config /etc/ssh/sshd_config.default
$SED "s?^Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
$SED "s?^#Banner.*?Banner /etc/ssh/alcasar-banner-ssh?g" /etc/ssh/sshd_config
# postfix banner anonymisation
$SED "s?^smtpd_banner =.*?smtpd_banner = \$myhostname ESMTP?g" /etc/postfix/main.cf
chown -R postfix:postfix /var/lib/postfix
# sshd liste on EXTIF & INTIF
$SED "s?^#ListenAddress 0\.0\.0\.0.*?ListenAddress 0\.0\.0\.0?g" /etc/ssh/sshd_config
# sshd authorized certificate for root login
$SED "s?^PermitRootLogin.*?PermitRootLogin without-password?g" /etc/ssh/sshd_config
# ALCASAR conf file
echo "HTTPS_LOGIN=off" >> $CONF_FILE
echo "HTTPS_CHILLI=off" >> $CONF_FILE
echo "SSH=on" >> $CONF_FILE
echo "SSH_ADMIN_FROM=0.0.0.0/0.0.0.0" >> $CONF_FILE
echo "LDAP=off" >> $CONF_FILE
echo "LDAP_SERVER=127.0.0.1" >> $CONF_FILE
echo "LDAP_BASE=cn=Users;dc=serverad;dc=localdomain" >> $CONF_FILE
echo "LDAP_UID=sAMAccountName" >> $CONF_FILE
echo "LDAP_FILTER=" >> $CONF_FILE
echo "LDAP_USER=alcasar" >> $CONF_FILE
echo "LDAP_PASSWORD=" >> $CONF_FILE
echo "LDAP_SSL=on" >> $CONF_FILE
echo "LDAP_CERT_REQUIRED=" >> $CONF_FILE
echo "SMS=off" >> $CONF_FILE
echo "SMS_NUM=" >> $CONF_FILE
echo "MULTIWAN=off" >> $CONF_FILE
echo "FAILOVER=30" >> $CONF_FILE
echo "## WANx=active,@IPx/mask,GWx,Weight,MTUx" >> $CONF_FILE
echo "#WAN1=\"1,$EXTIF:1,192.168.2.20/24,192.168.2.6,1,1500\"" >> $CONF_FILE
echo "#WAN2=\"1,$EXTIF:2,192.168.3.20/24,192.168.3.1,2,1500\"" >> $CONF_FILE
echo "BL_PUREIP=on" >> $CONF_FILE
echo "BL_SAFESEARCH=off" >> $CONF_FILE
echo "WL_SAFESEARCH=off" >> $CONF_FILE
echo "IOT_CAPTURE=off" >> $CONF_FILE
# Prompt customisation (colors)
[ -e /etc/bashrc.default ] || cp /etc/bashrc /etc/bashrc.default
cp -f $DIR_CONF/bashrc /etc/. ; chmod 644 /etc/bashrc ; chown root:root /etc/bashrc
$SED "s?^ORGANISME.*?ORGANISME=$ORGANISME?g" /etc/bashrc
# sudoers configuration for "apache" & "sysadmin"
[ -e /etc/sudoers.default ] || cp /etc/sudoers /etc/sudoers.default
cp -f $DIR_CONF/sudoers /etc/. ; chmod 440 /etc/sudoers ; chown root:root /etc/sudoers
$SED "s?^Host_Alias.*?Host_Alias LAN_ORG=$PRIVATE_NETWORK/$PRIVATE_NETMASK,localhost #réseau de l'organisme?g" /etc/sudoers
# Modify some logrotate files (gammu, ulogd)
cp -f $DIR_CONF/logrotate.d/* /etc/logrotate.d/
chmod 644 /etc/logrotate.d/*
# Log compression
$SED "s?^delaycompress.*?#&?g" /etc/logrotate.conf
# actualisation des fichiers logs compressés
for dir in firewall e2guardian lighttpd
do
find /var/log/$dir -type f -name "*.log-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]" -exec gzip {} \;
done
# create the alcasar-load_balancing unit
cat << EOF > /lib/systemd/system/alcasar-load_balancing.service
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This unit lauches alcasar-load-balancing.sh script.
[Unit]
Description=alcasar-load_balancing.sh execution
After=network.target iptables.service
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=$DIR_DEST_BIN/alcasar-load_balancing.sh start
ExecStop=$DIR_DEST_BIN/alcasar-load_balancing.sh stop
TimeoutSec=0
SysVStartPriority=99
[Install]
WantedBy=multi-user.target
EOF
/usr/bin/systemctl daemon-reload
# processes launched at boot time (Systemctl)
for i in alcasar-load_balancing mysqld lighttpd php-fpm ntpd iptables unbound unbound-blacklist unbound-whitelist dnsmasq-whitelist unbound-blackhole radiusd nfcapd e2guardian clamav-freshclam ulogd-ssh ulogd-traceability ulogd-ext-access chilli fail2ban havp tinyproxy vnstat sshd
do
/usr/bin/systemctl -q enable $i.service
done
# disable processes at boot time (Systemctl)
for i in ulogd gpm dhcpd
do
/usr/bin/systemctl -q disable $i.service
done
# Apply French Security Agency (ANSSI) rules
# ignore ICMP broadcast (smurf attack)
echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" > /etc/sysctl.d/alcasar.conf
# ignore ICMP errors bogus
echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.d/alcasar.conf
# remove ICMP redirects responces
echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.d/alcasar.conf
# enable SYN Cookies (Syn flood attacks)
echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.d/alcasar.conf
# enable kernel antispoofing
echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.d/alcasar.conf
# ignore source routing
echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.d/alcasar.conf
# set conntrack timer to 1h (3600s) instead of 5 weeks
echo "net.netfilter.nf_conntrack_tcp_timeout_established = 3600" >> /etc/sysctl.d/alcasar.conf
# disable log_martians (ALCASAR is often installed between two private network addresses)
echo "net.ipv4.conf.all.log_martians = 0" >> /etc/sysctl.d/alcasar.conf
# disable iptables_helpers
echo "net.netfilter.nf_conntrack_helper = 0" >> /etc/sysctl.d/alcasar.conf
# Switch to the router mode
echo "net.ipv4.ip_forward = 1" >> /etc/sysctl.d/alcasar.conf
# Remove unused service ipv6
echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.all.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.default.disable_ipv6 = 1" >> /etc/sysctl.d/alcasar.conf
echo "net.ipv6.conf.default.autoconf = 0" >> /etc/sysctl.d/alcasar.conf
# switch to multi-users runlevel (instead of x11)
ln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
# GRUB2 modifications (Wait time : 3s - ALCASAR entry - VGA=791 - Change the default banner
[ -e /etc/default/grub.default ] || cp /etc/default/grub /etc/default/grub.default
$SED "s?^GRUB_TIMEOUT=.*?GRUB_TIMEOUT=3?g" /etc/default/grub
$SED "s?^GRUB_DISTRIBUTOR=.*?GRUB_DISTRIBUTOR=ALCASAR?g" /etc/default/grub
[ -e /etc/mageia-release.default ] || cp /etc/mageia-release /etc/mageia-release.default
vm_vga=`lsmod | egrep -c "virtio|vmwgfx"` # test if in VM
if [ $vm_vga == 0 ] # is not a VM
then
cp -f $DIR_CONF/banner /etc/mageia-release # ALCASAR ASCII-Art
echo >> /etc/mageia-release
$SED "s?^GRUB_CMDLINE_LINUX_DEFAULT=\"?&vga=791 ?" /etc/default/grub
fi
if [ $Lang == "fr" ]
then
echo "Bienvenue sur ALCASAR V$VERSION" >> /etc/mageia-release
echo "Connectez-vous à l'URL 'https://$HOSTNAME.$DOMAIN/acc'" >> /etc/mageia-release
else
echo "Welcome on ALCASAR V$VERSION" >> /etc/mageia-release
echo "Connect to 'https://$HOSTNAME.$DOMAIN/acc'" >> /etc/mageia-release
fi
/usr/bin/update-grub2
# Load and apply the previous conf file
if [ "$mode" = "update" ]
then
$DIR_DEST_BIN/alcasar-archive.sh --now # exports current logs in /var/Save/archive
$DIR_DEST_BIN/alcasar-conf.sh --load
PARENT_SCRIPT=`basename $0`
export PARENT_SCRIPT # to avoid stop&start process during the installation process
$DIR_DEST_BIN/alcasar-conf.sh --apply
$DIR_DEST_BIN/alcasar-file-clean.sh # Clean & sort conf files. Add uamallowed domains to the dns-blackhole conf
$SED "s?^INSTALL_DATE=.*?INSTALL_DATE=$DATE?g" $CONF_FILE
$SED "s?^VERSION=.*?VERSION=$VERSION?g" $CONF_FILE
fi
rm -f /var/tmp/alcasar-conf*
chown -R root:apache $DIR_DEST_ETC/*
chmod -R 660 $DIR_DEST_ETC/*
chmod ug+x $DIR_DEST_ETC/digest
cd $DIR_INSTALL || { echo "Unable to find $DIR_INSTALL directory"; exit 1; }
echo ""
echo "#############################################################################"
if [ $Lang == "fr" ]
then
echo "# Fin d'installation d'ALCASAR #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- ALCASAR sera fonctionnel après redémarrage du système"
echo
echo "- Lisez attentivement la documentation d'exploitation"
echo
echo "- Le centre de controle d'ALCASAR (ACC) est à l'adresse http://$HOSTNAME.$DOMAIN"
echo
echo " Appuyez sur 'Entrée' pour continuer"
else
echo "# End of ALCASAR install process #"
echo "# #"
echo "# Application Libre pour le Contrôle Authentifié et Sécurisé #"
echo "# des Accès au Réseau ( ALCASAR ) #"
echo "# #"
echo "#############################################################################"
echo
echo "- The system will be rebooted in order to operate ALCASAR"
echo
echo "- Read the exploitation documentation"
echo
echo "- The ALCASAR Control Center (ACC) is at http://$HOSTNAME.$DOMAIN"
echo
echo " Hit 'Enter' to continue"
fi
sleep 2
if [ "$mode" == "install" ] || [ "$DEBUG_ALCASAR" == "on" ]
then
read
fi
clear
reboot
} # End of post_install()
#####################################################################################
# Main Install loop #
#####################################################################################
dir_exec=`dirname "$0"`
if [ $dir_exec != "." ]
then
echo "Lancez ce programme depuis le répertoire de l'archive d'ALCASAR"
echo "Launch this program from the ALCASAR archive directory"
exit 0
fi
if [ $EUID -gt 0 ]
then
echo "Vous devez être \"root\" pour installer ALCASAR (commande 'su')"
echo "You must be \"root\" to install ALCASAR ('su' command)"
exit 0
fi
VERSION=`cat $DIR_INSTALL/VERSION`
usage="Usage: alcasar.sh {-i or --install} | {-u or --uninstall}"
nb_args=$#
args=$1
if [ $nb_args -eq 0 ]
then
nb_args=1
args="-h"
fi
chmod -R u+x $DIR_SCRIPTS/*
case $args in
-\? | -h* | --h*)
echo "$usage"
exit 0
;;
-i | --install)
for func in license testing
do
header_install
$func
if [ $DEBUG_ALCASAR == "on" ]
then
echo "*** 'debug' : end of install '$func' ***"
read
fi
done
# RPMs install
$DIR_SCRIPTS/alcasar-urpmi.sh
if [ "$?" != "0" ]
then
exit 0
fi
if [ -e $CONF_FILE ]
then
# Uninstall or update the running version
if [ "$mode" == "update" ]
then
$DIR_DEST_BIN/alcasar-uninstall.sh -update
else
$DIR_DEST_BIN/alcasar-uninstall.sh -full
fi
fi
if [ $DEBUG_ALCASAR == "on" ]
then
echo "*** 'debug' : end of cleaning ***"
read
fi
# Test if manual update
if [ -e /var/tmp/alcasar-conf*.tar.gz ] && [ "$mode" == "install" ]
then
header_install
if [ $Lang == "fr" ]
then echo "Le fichier de configuration d'une ancienne version a été trouvé";
else echo "The configuration file of an old version has been found";
fi
response=0
PTN='^[oOnNyY]?$'
until [[ "$response" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous l'utiliser (O/n)? ";
else echo -n "Do you want to use it (Y/n)?";
fi
read response
if [ "$response" = "n" ] || [ "$response" = "N" ]
then rm -f /var/tmp/alcasar-conf*
fi
done
fi
# Test if update
if [ -e /var/tmp/alcasar-conf* ]
then
if [ $Lang == "fr" ]
then echo "#### Installation avec mise à jour ####";
else echo "#### Installation with update ####";
fi
# Extract some info from the previous configuration file
tar -xf /var/tmp/alcasar-conf* conf/etc/alcasar.conf
ORGANISME=`grep ^ORGANISM= conf/etc/alcasar.conf|cut -d"=" -f2`
PREVIOUS_VERSION=`grep ^VERSION= conf/etc/alcasar.conf|cut -d"=" -f2`
MAJ_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f1`
MIN_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f2`
UPD_PREVIOUS_VERSION=`echo $PREVIOUS_VERSION|cut -d"." -f3|cut -c1`
mode="update"
fi
for func in init network CA ACC time_server init_db freeradius chilli e2guardian antivirus tinyproxy ulogd nfsen vnstat dnsmasq unbound dhcpd BL cron fail2ban gammu_smsd msec letsencrypt post_install
do
$func
if [ $DEBUG_ALCASAR == "on" ]
then
echo "*** 'debug' : end of install '$func' ***"
read
fi
done
;;
-u | --uninstall)
if [ ! -e $DIR_DEST_BIN/alcasar-uninstall.sh ]
then
if [ $Lang == "fr" ]
then echo "ALCASAR n'est pas installé!";
else echo "ALCASAR isn't installed!";
fi
exit 0
fi
response=0
PTN='^[oOyYnN]?$'
until [[ "$response" =~ $PTN ]]
do
if [ $Lang == "fr" ]
then echo -n "Voulez-vous créer le fichier de configuration de la version actuelle (O/n)? ";
else echo -n "Do you want to create the running version configuration file (Y/n)? ";
fi
read response
done
if [ "$response" = "o" ] || [ "$response" = "O" ] || [ "$response" = "Y" ] || [ "$response" = "y" ]
then
$DIR_SCRIPTS/alcasar-conf.sh --create
else
rm -f /var/tmp/alcasar-conf*
fi
# Uninstall the running version
$DIR_DEST_BIN/alcasar-uninstall.sh -full
;;
*)
echo "Argument inconnu :$1";
echo "Unknown argument :$1";
echo "$usage"
exit 1
;;
esac
# end of script
Generated by GNU Enscript 1.6.6.