Rev 1192 | Blame | Last modification | View Log
FAIL_CONF="/etc/fail2ban/fail2ban.conf"
JAIL_CONF="/etc/fail2ban/jail.conf"
DIR_FILTER="/etc/fail2ban/filter.d/"
ACTION_ALLPORTS="/etc/fail2ban/action.d/iptables-allports.conf"
if(test -f $FAIL_CONF)
then
mv $FAIL_CONF $FAIL_CONF.old
fi
if(test -f $JAIL_CONF)
then
mv $JAIL_CONF $JAIL_CONF.old
fi
#########################################################
## Mise à jour du fichier de configuration de fail2ban ##
#########################################################
cat << EOF > $FAIL_CONF
[Definition]
# Option: loglevel
# Notes.: Set the log level output.
# 1 = ERROR
# 2 = WARN
# 3 = INFO
# 4 = DEBUG
# Values: NUM Default: 3
#
loglevel = 3
# Option: logtarget
# Notes.: Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
# Only one log target can be specified.
# Values: STDOUT STDERR SYSLOG file Default: /var/log/fail2ban.log
#
logtarget = /var/log/fail2ban.log
# Option: socket
# Notes.: Set the socket file. This is used to communicate with the daemon. Do
# not remove this file when Fail2ban runs. It will not be possible to
# communicate with the server afterwards.
# Values: FILE Default: /var/run/fail2ban/fail2ban.sock
#
socket = /var/run/fail2ban/fail2ban.sock
EOF
#########################################################
## Mise à jour de la configuration de jail de fail2ban ##
#########################################################
cat << EOF > $JAIL_CONF
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
#
# $Revision$
#
# The DEFAULT allows a global definition of the options. They can be overridden
# in each jail afterwards.
[DEFAULT]
# "ignoreip" can be an IP address, a CIDR mask or a DNS host. Fail2ban will not
# ban a host which matches an address in this list. Several addresses can be
# defined using space separator.
ignoreip = 127.0.0.1/8
# "bantime" is the number of seconds that a host is banned.
bantime = 600
# A host is banned if it has generated "maxretry" during the last "findtime"
# seconds.
# Un client est banni dans le cas ou il genere "maxretry" pendant le temps
# findtime en seconds
# Ici 5 requetes remplissant les filtres en 60 secondes
findtime = 60
# "maxretry" is the number of failures before a host get banned.
maxretry = 5
# "backend" specifies the backend used to get files modification. Available
# options are "gamin", "polling" and "auto". This option can be overridden in
# each jail too (use "gamin" for a jail and "polling" for another).
#
# gamin: requires Gamin (a file alteration monitor) to be installed. If Gamin
# is not installed, Fail2ban will use polling.
# polling: uses a polling algorithm which does not require external libraries.
# auto: will choose Gamin if available and polling otherwise.
backend = auto
# This jail corresponds to the standard configuration in Fail2ban 0.6.
# The mail-whois action send a notification e-mail with a whois request
# in the body.
# Bannissement si Mod_evasive bannie un @IP après 2 interdit par Apache alors BAN sur tous les ports
[mod-evasive]
enabled = true
#enabled = false
filter = mod-evasive
action = iptables-allports[name=mod-evasive]
logpath = /var/log/httpd/error_log
maxretry = 2
# Bannissement pour SSH-Brute-Force
[ssh-iptables]
enabled = true
#enabled = false
filter = sshd
action = iptables-allports[name=SSH]
logpath = /var/log/auth.log
maxretry = 3
# Bannissement si 5 tentatives de connexion echouer en alcasar/acc
[htdigest]
enabled = true
#enabled = false
filter = htdigest
action = iptables-allports[name=htdigest]
logpath = /var/log/httpd/ssl_error_log
maxretry = 5
# Bannissement si 5 tentatives de connexion avec intercept.php avec reason=reject
[intercept]
enabled = true
#enabled = false
filter = intercept
action = iptables-allports[name=intercept]
logpath = /var/log/httpd/ssl_request_log
maxretry = 5
# Bannissement si 5 tentatives de changement de mot de passe en moins de 1 min
# 5 POST pour changer le mot de passe que le POST soit ok ou non.
[mot_de_passe]
enabled = true
#enabled = false
filter = mot_de_passe
action = iptables-allports[name=Mot_de_Passe]
logpath = /var/log/httpd/ssl_request_log
maxretry = 5
[proftpd-iptables]
enabled = false
filter = proftpd
action = iptables[name=ProFTPD, port=ftp, protocol=tcp]
sendmail-whois[name=ProFTPD, dest=you@example.com]
logpath = /var/log/proftpd/proftpd.log
maxretry = 6
# This jail forces the backend to "polling".
[sasl-iptables]
enabled = false
filter = sasl
backend = polling
action = iptables[name=sasl, port=smtp, protocol=tcp]
sendmail-whois[name=sasl, dest=you@example.com]
logpath = /var/log/mail.log
# Here we use TCP-Wrappers instead of Netfilter/Iptables. "ignoreregex" is
# used to avoid banning the user "myuser".
[ssh-tcpwrapper]
enabled = false
filter = sshd
action = hostsdeny
sendmail-whois[name=SSH, dest=you@example.com]
ignoreregex = for myuser from
logpath = /var/log/auth.log
# This jail demonstrates the use of wildcards in "logpath".
# Moreover, it is possible to give other files on a new line.
[apache-tcpwrapper]
enabled = false
filter = apache-auth
action = hostsdeny
logpath = /var/log/apache*/*error.log
/home/www/myhomepage/error.log
maxretry = 6
# The hosts.deny path can be defined with the "file" argument if it is
# not in /etc.
[postfix-tcpwrapper]
enabled = false
filter = postfix
action = hostsdeny[file=/not/a/standard/path/hosts.deny]
sendmail[name=Postfix, dest=you@example.com]
logpath = /var/log/postfix.log
bantime = 300
# Do not ban anybody. Just report information about the remote host.
# A notification is sent at most every 600 seconds (bantime).
[vsftpd-notification]
enabled = false
filter = vsftpd
action = sendmail-whois[name=VSFTPD, dest=you@example.com]
logpath = /var/log/vsftpd.log
maxretry = 5
bantime = 1800
# Same as above but with banning the IP address.
[vsftpd-iptables]
enabled = false
filter = vsftpd
action = iptables[name=VSFTPD, port=ftp, protocol=tcp]
sendmail-whois[name=VSFTPD, dest=you@example.com]
logpath = /var/log/vsftpd.log
maxretry = 5
bantime = 1800
# Ban hosts which agent identifies spammer robots crawling the web
# for email addresses. The mail outputs are buffered.
[apache-badbots]
enabled = false
filter = apache-badbots
action = iptables-multiport[name=BadBots, port="http,https"]
sendmail-buffered[name=BadBots, lines=5, dest=you@example.com]
logpath = /var/www/*/logs/access_log
bantime = 172800
maxretry = 1
# Use shorewall instead of iptables.
[apache-shorewall]
enabled = false
filter = apache-noscript
action = shorewall
sendmail[name=Postfix, dest=you@example.com]
logpath = /var/log/apache2/error_log
# Ban attackers that try to use PHP's URL-fopen() functionality
# through GET/POST variables. - Experimental, with more than a year
# of usage in production environments.
[php-url-fopen]
enabled = false
port = http,https
filter = php-url-fopen
logpath = /var/www/*/logs/access_log
maxretry = 1
# A simple PHP-fastcgi jail which works with lighttpd.
# If you run a lighttpd server, then you probably will
# find these kinds of messages in your error_log:
# ALERT – tried to register forbidden variable ‘GLOBALS’
# through GET variables (attacker '1.2.3.4', file '/var/www/default/htdocs/index.php')
# This jail would block the IP 1.2.3.4.
[lighttpd-fastcgi]
enabled = false
port = http,https
filter = lighttpd-fastcgi
# adapt the following two items as needed
logpath = /var/log/lighttpd/error.log
maxretry = 2
# This jail uses ipfw, the standard firewall on FreeBSD. The "ignoreip"
# option is overridden in this jail. Moreover, the action "mail-whois" defines
# the variable "name" which contains a comma using "". The characters '' are
# valid too.
[ssh-ipfw]
enabled = false
filter = sshd
action = ipfw[localhost=192.168.0.1]
sendmail-whois[name="SSH,IPFW", dest=you@example.com]
logpath = /var/log/auth.log
ignoreip = 168.192.0.1
# These jails block attacks against named (bind9). By default, logging is off
# with bind9 installation. You will need something like this:
#
# logging {
# channel security_file {
# file "/var/log/named/security.log" versions 3 size 30m;
# severity dynamic;
# print-time yes;
# };
# category security {
# security_file;
# };
# };
#
# in your named.conf to provide proper logging.
# This jail blocks UDP traffic for DNS requests.
# !!! WARNING !!!
# Since UDP is connection-less protocol, spoofing of IP and imitation
# of illegal actions is way too simple. Thus enabling of this filter
# might provide an easy way for implementing a DoS against a chosen
# victim. See
# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html
# Please DO NOT USE this jail unless you know what you are doing.
#
# [named-refused-udp]
#
# enabled = false
# filter = named-refused
# action = iptables-multiport[name=Named, port="domain,953", protocol=udp]
# sendmail-whois[name=Named, dest=you@example.com]
# logpath = /var/log/named/security.log
# ignoreip = 168.192.0.1
# This jail blocks TCP traffic for DNS requests.
[named-refused-tcp]
enabled = false
filter = named-refused
action = iptables-multiport[name=Named, port="domain,953", protocol=tcp]
sendmail-whois[name=Named, dest=you@example.com]
logpath = /var/log/named/security.log
ignoreip = 168.192.0.1
EOF
###########################################
## Mise en place des filters spécifiques ##
## - Mod_evasive.conf ##
## - htdigest.conf ##
## -
## -
###########################################
######################
## MOD-EVASIVE.CONF ##
######################
if (test -f $DIR_FILTER/mod-evasive.conf)
then
mv $DIR_FILTER/mod-evasive.conf $DIR_FILTER/mod-evasive.conf.old
fi
cat << EOF > $DIR_FILTER/mod-evasive.conf
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
#
# $Revision$
#
[Definition]
# Option: failregex
# Notes.: regex to match the password failure messages in the logfile. The
# host must be matched by a group named "host". The tag "<HOST>" can
# be used for standard IP/hostname matching and is only an alias for
# (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
# Values: TEXT
#
failregex = [[]client <HOST>[]] client denied by server configuration
# Option: ignoreregex
# Notes.: regex to ignore. If this regex matches, the line is ignored.
# Values: TEXT
#
ignoreregex =
EOF
###################
## HTDIGEST.CONF ##
###################
if ( test -f $DIR_FILTER/htdigest.conf)
then
mv $DIR_FILTER/htdigest.conf $DIR_FILTER/htdigest.conf.old
fi
cat << EOF > $DIR_FILTER/htdigest.conf
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
#
# $Revision$
#
[Definition]
# Option: failregex
# Notes.: regex to match the password failure messages in the logfile. The
# host must be matched by a group named "host". The tag "<HOST>" can
# be used for standard IP/hostname matching and is only an alias for
# (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
# Values: TEXT
#
failregex = [[]error[]] [[]client <HOST>[]] Digest:
# Option: ignoreregex
# Notes.: regex to ignore. If this regex matches, the line is ignored.
# Values: TEXT
#
ignoreregex =
EOF
####################
## INTERCEPT.CONF ##
####################
if ( test -f $DIR_FILTER/intercept.conf)
then
mv $DIR_FILTER/intercept.conf $DIR_FILTER/intercept.conf.old
fi
cat << EOF > $DIR_FILTER/intercept.conf
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
#
# $Revision$
#
[Definition]
# Option: failregex
# Notes.: regex to match the password failure messages in the logfile. The
# host must be matched by a group named "host". The tag "<HOST>" can
# be used for standard IP/hostname matching and is only an alias for
# (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
# Values: TEXT
#
failregex = <HOST> TLSv1 DHE-RSA-AES256-SHA ["]GET \/intercept\.php\?res=failed[&]reason=reject
# Option: ignoreregex
# Notes.: regex to ignore. If this regex matches, the line is ignored.
# Values: TEXT
#
ignoreregex =
EOF
#######################
## MOT_DE_PASSE.CONF ##
#######################
if ( test -f $DIR_FILTER/mot_de_passe.conf )
then
mv $DIR_FILTER/mot_de_passe.conf $DIR_FILTER/mot_de_passe.conf.old
fi
cat << EOF > $DIR_FILTER/mot_de_passe.conf
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
#
# $Revision$
#
[Definition]
# Option: failregex
# Notes.: regex to match the password failure messages in the logfile. The
# host must be matched by a group named "host". The tag "<HOST>" can
# be used for standard IP/hostname matching and is only an alias for
# (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
# Values: TEXT
#
failregex = <HOST> TLSv1 DHE-RSA-AES256-SHA ["]POST \/pass\/index\.php HTTP
# Option: ignoreregex
# Notes.: regex to ignore. If this regex matches, the line is ignored.
# Values: TEXT
#
ignoreregex =
EOF
##############################################
## Log sur Iptables quand iptables-allports ##
##############################################
if ( test -f $ACTION_ALLPORTS )
then
mv $ACTION_ALLPORTS $ACTION_ALLPORTS.old
fi
cat << EOF > $ACTION_ALLPORTS
# Fail2Ban configuration file
#
# Author: Cyril Jaquier
# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
# made active on all ports from original iptables.conf
#
# $Revision$
#
[Definition]
# Option: actionstart
# Notes.: command executed once at the start of Fail2Ban.
# Values: CMD
#
actionstart = iptables -N fail2ban-<name>
iptables -A fail2ban-<name> -j RETURN
iptables -I <chain> -p <protocol> -j fail2ban-<name>
# Option: actionstop
# Notes.: command executed once at the end of Fail2Ban
# Values: CMD
#
actionstop = iptables -D <chain> -p <protocol> -j fail2ban-<name>
iptables -F fail2ban-<name>
iptables -X fail2ban-<name>
# Option: actioncheck
# Notes.: command executed once before each actionban command
# Values: CMD
#
actioncheck = iptables -n -L <chain> | grep -q fail2ban-<name>
# Option: actionban
# Notes.: command executed when banning an IP. Take care that the
# command is executed with Fail2Ban user rights.
# Tags: <ip> IP address
# <failures> number of failures
# <time> unix timestamp of the ban time
# Values: CMD
actionban = iptables -I fail2ban-<name> 1 -s <ip> -j ULOG --ulog-prefix "Fail2Ban -- DROP"
iptables -I fail2ban-<name> 1 -s <ip> -j DROP
# Option: actionunban
# Notes.: command executed when unbanning an IP. Take care that the
# command is executed with Fail2Ban user rights.
# Tags: <ip> IP address
# <failures> number of failures
# <time> unix timestamp of the ban time
# Values: CMD
#
actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
iptables -D fail2ban-<name> -s <ip> -j ULOG --ulog-prefix "Fail2Ban -- DROP"
[Init]
# Defaut name of the chain
#
name = default
# Option: protocol
# Notes.: internally used by config reader for interpolations.
# Values: [ tcp | udp | icmp | all ] Default: tcp
#
protocol = tcp
# Option: chain
# Notes specifies the iptables chain to which the fail2ban rules should be
# added
# Values: STRING Default: INPUT
chain = INPUT
EOF
#Activation de l'unité
systemctl enable fail2ban.service