Rev 3170 | Rev 3200 | Go to most recent revision | Blame | Compare with Previous | Last modification | View Log
#!/bin/bash
# alcasar-rpm.sh
# by 3abtux and Rexy
# This script is distributed under the Gnu General Public License (GPL)
# script de mise en place des dépots RPM + installation des RPM complémentaires
# configure the RPM repository + complementary RPM installation
Lang=`echo $LANG|cut -c 1-2`
SED="/bin/sed -i"
VERSION="9"
ARCH="x86_64"
# The kernel version we compile netflow for
KERNEL="kernel-server-6.6.22-1.mga9"
# ****** Alcasar needed RPMS - paquetages nécessaires au fonctionnement d'Alcasar ******
# (old) perl-Socket6 : needed by nfsen
# "fonts-dejavu-common" & "fonts-ttf-dejavu" : fonts needed by wkhtmltopdf
# "lsscsi" & nvme-cli" & "php-dom" : needed by phpsysinfo
# "socat" : avoid a warning when run the install script of letsencrypt ("acme.sh")
# "sudo" : needed after a reinstallation (to be investigated)
# "postfix" + "cyrus-sasl" + "lib64sasl2-plug-plain" : email registration method
PACKAGES="vim-enhanced freeradius freeradius-mysql freeradius-ldap lighttpd lighttpd-mod_auth php-fpm php-gd php-ldap php-mysqli php-mbstring php-sockets php-curl php-pdo_sqlite php-cli php-dom php-filter unbound e2guardian postfix mariadb ntpsec bind-utils openssh-server rng-utils rsync fail2ban gnupg2 ulogd ipset usb_modeswitch vnstat dos2unix p7zip msec kernel-userspace-headers kernel-firmware kernel-firmware-nonfree dhcp-server tcpdump fonts-dejavu-common fonts-ttf-dejavu lsscsi nvme-cli sudo socat postfix cyrus-sasl lib64sasl2-plug-plain iftop"
rpm_repository_sync ()
{
cat <<EOF > /etc/urpmi/urpmi.cfg
{
downloader: wget
}
EOF
echo ${!MIRRORLIST}
urpmi.addmedia core --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/release
urpmi.addmedia core-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/core/updates
urpmi.addmedia nonfree --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/release
urpmi.addmedia nonfree-updates --update --probe-synthesis --mirrorlist ${!MIRRORLIST} /media/nonfree/updates
}
rpm_error ()
{
# restore previous rpm conf file & removed RPMs
[ -e /etc/urpmi/urpmi.cfg.old ] && mv /etc/urpmi/urpmi.cfg.old /etc/urpmi/urpmi.cfg
urpmi --no-verify-rpm --auto rpms/$ARCH/wkhtmltopdf*.rpm
echo
if [ $Lang == "fr" ]
then
echo "Relancez l'installation ultérieurement."
echo "Si vous rencontrez à nouveau ce problème, modifier les variables MIRRORLIST[1&2] du fichier 'scripts/alcasar-rpm.sh'"
else
echo "Try an other install later."
echo "If this problem occurs again, change the MIRRORLIST[1&2] variables in the file 'scripts/alcasar-rpm.sh'"
fi
}
# We prefer wget than curl
urpmi --no-verify-rpm --auto rpms/$ARCH/wget*.rpm
# Set the RPM repository (if not already set)
cp /etc/urpmi/urpmi.cfg /etc/urpmi/urpmi.cfg.old
ACTIVE_REPO=`cat /etc/urpmi/urpmi.cfg|grep "mageia.org"|wc -l`
MIRROR_NBR=3
# For French
MIRRORLIST1="http://ftp.free.fr/mirrors/mageia.org/distrib/$VERSION/$ARCH"
# For Europeans
MIRRORLIST2="https://www.mirrorservice.org/pub/mageia/distrib/$VERSION/$ARCH"
# For everybody
MIRRORLIST3="https://mirrors.mageia.org/api/mageia.$VERSION.$ARCH.list"
try_nb="0"; nb_repository="0"
while [ "$nb_repository" != "4" ]
do
try_nb=`expr $try_nb + 1`
MIRRORLIST="MIRRORLIST$try_nb"
rpm_repository_sync
nb_repository=`cat /etc/urpmi/urpmi.cfg|grep mirrorlist|wc -l`
if [ "$nb_repository" != "4" ]
then
if [ $Lang == "fr" ]
then
echo "Une erreur a été détectée lors de la synchronisation avec le dépot N°$try_nb."
else
echo "An error occurs when synchronising the repositories N°$try_nb"
fi
if [ $(expr $try_nb) -eq $MIRROR_NBR ]
then
rpm_error
exit 1
fi
if [ $Lang == "fr" ]
then
echo "Voulez-vous tenter une synchronisation avec un autre dépôt ? (O/n)"
else
echo "Do you want to try a synchronisation with an other repository? (Y/n)"
fi
response=0
PTN='^[oOnNyY]?$'
until [[ "$response" =~ $PTN ]]
do
read response
done
if [ "$response" = "n" ] || [ "$response" = "N" ]
then
[ -e /etc/urpmi/urpmi.cfg.old ] && mv /etc/urpmi/urpmi.cfg.old /etc/urpmi/urpmi.cfg # restore previous rpm conf file
exit 1
fi
fi
done
# At this time, we only skip Kernel update
echo "/^kernel/" > /etc/urpmi/skip.list
if [ `grep -E '^exclude=' /etc/dnf/dnf.conf |wc -l` -eq "1" ]; then
$SED "s?^exclude=.*?exclude=kernel\*?g" /etc/dnf/dnf.conf
else
echo "exclude=kernel*" >> /etc/dnf/dnf.conf
fi
# download the kernel used by ALCASAR
if [ $Lang == "fr" ]
then
echo "Récupération du noyau Linux exploité par ALCASAR. Veuillez patienter ..."
else
echo "Download the Linux kernel used by ALCASAR. Please wait ..."
fi
urpmi --auto --quiet $KERNEL
# download updated RPM in cache
if [ $Lang == "fr" ]
then
echo "Récupération des paquetages de mise à jour. Veuillez patienter ..."
echo "Il est temps d'aller prendre un café (ou une bonne bière) ;-)"
else
echo "Updated RPM download. Please wait ..."
echo "You should now take a coffe (or a good beer) ;-)"
fi
urpmi --auto --auto-update --quiet --test --retry 2
if [ "$?" != "0" ]
then
echo
if [ $Lang == "fr" ]
then
echo "Une erreur a été détectée lors de la récupération des paquetages."
else
echo "An error occurs when downloading RPMS"
fi
rpm_error
exit 1
fi
# update with cached RPM
urpmi --auto --auto-update
if [ "$?" != "0" ]
then
echo
if [ $Lang == "fr" ]
then
echo "Une erreur a été détectée lors de la mise à jour des paquetages."
else
echo "An error occurs when updating packages"
fi
rpm_error
exit 1
fi
# Clean the RPM cache
urpmi --clean
# Download of ALCASAR specifics RPM in cache (and test)
if [ $Lang == "fr" ]
then
echo "Récupération des paquetages complémentaires. Veuillez patienter ..."
else
echo "Download of complementary packages. Please wait ..."
fi
urpmi --auto --no-recommends $PACKAGES --quiet --test --retry 2
if [ "$?" != "0" ]
then
echo
if [ $Lang == "fr" ]
then
echo "Une erreur a été détectée lors de la récupération des paquetages complémentaires."
else
echo "An error occurs when downloading complementary packages"
fi
rpm_error
exit 1
fi
# update with cached RPM
urpmi --auto --no-recommends $PACKAGES
if [ "$?" != "0" ]
then
echo
if [ $Lang == "fr" ]
then
echo "Une erreur a été détectée lors de l'installation des paquetages complémentaires."
else
echo "An error occurs when installing complementary packages"
fi
rpm_error
exit 1
fi
# Keep only the kernel version we compil netflow with, and remove all others
kernelVersion=$(rpm -qa | grep -e ^kernel-server -e ^kernel-desktop)
for i in $kernelVersion
do
if [ $i != $KERNEL ];then
urpme --auto $i
fi
done
# delete unused RPMs
if [ $Lang == "fr" ]
then
echo "Cleaning the system : "
else
echo "Nettoyage du système : "
fi
unused_rpm="shorewall mandi plymouth squid polkit pm-utils dnsmasq clamav clamd clamav-db"
/usr/sbin/urpme --auto -a $unused_rpm
for rpm in `rpm -qa|grep mga7`; do urpme --auto $rpm; done
/usr/sbin/urpme --auto --auto-orphans
# Save chilli launch script (erase with new rpm one)
[ -e /etc/chilli.conf ] && cp /etc/chilli.conf /tmp/
# Install home made RPMs
for pkg in `ls rpms/$ARCH/*.rpm`
do
urpmi --no-verify --auto $pkg
done
# restore chilli launch script
[ -e /tmp/chilli.conf ] && mv /tmp/chilli.conf /etc/
# Clean the RPM cache
urpmi --clean
# the ipt-netflow RPM add the kernel module ipt_NETFLOW (the modules dependance tree need to be updated). "2>/dev/null" in order not to display a error (the running kernel is not the ALCASAR one during the installation process)
/sbin/depmod -a 2>/dev/null
# test if all needed rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in $PACKAGES
do
nb_pkg=`expr $nb_pkg + 1`
if rpm -q --quiet $pkg ; then
count_pkg=`expr $count_pkg + 1`
else
echo "error installing $pkg"
fi
done
if [ $count_pkg -ne $nb_pkg ]
then
exit 1
fi
# test if all custom rpms are correctly installed
count_pkg=0; nb_pkg=0;
for pkg in `ls rpms/$ARCH/|sed 's/.x86_64.rpm//'`
do
nb_pkg=`expr $nb_pkg + 1`
if rpm -q --quiet $pkg ; then
count_pkg=`expr $count_pkg + 1`
else
echo "error installing $pkg"
fi
done
if [ $count_pkg -ne $nb_pkg ]
then
exit 1
fi
# .rpmnew handling (unused with ALCASAR)
[ -e /etc/shadow.rpmnew ] && rm -f /etc/shadow.rpmnew
[ -e /etc/sysconfig/system.rpmnew ] && rm -f /etc/sysconfig/system.rpmnew
[ -e /etc/rpm/macros.rpmnew ] && rm -f /etc/rpm/macros.rpmnew
[ -e /etc/fstab.rpmnew ] && rm -f /etc/fstab.rpmnew
[ -e /etc/shells.rpmnew ] && rm -f /etc/shells.rpmnew
[ -e /etc/hosts.rpmnew ] && rm -f /etc/hosts.rpmnew
[ -e /etc/systemd/journald.conf.rpmnew ] && rm -f /etc/systemd/journald.conf.rpmnew
[ -e /etc/raddb/certs/dh.rpmnew ] && rm -f /etc/raddb/certs/dh.rpmnew
# .rpmnew handling (used with ALCASAR)
[ -e /etc/php.ini.rpmnew ] && mv -f /etc/php.ini.rpmnew /etc/php.ini.default
[ -e /etc/lighttpd/lighttpd.conf.rpmnew ] && mv -f /etc/lighttpd/lighttpd.conf.rpmnew /etc/lighttpd/lighttpd.conf.default
[ -e /etc/lighttpd/modules.conf.rpmnew ] && mv -f /etc/lighttpd/modules.conf.rpmnew /etc/lighttpd/modules.conf.default
[ -e /etc/e2guardian/e2guardian.conf.rpmnew ] && mv -f /etc/e2guardian/e2guardian.conf.rpmnew /etc/e2guardian/e2guardian.conf.default
[ -e /etc/e2guardian/e2guardianf1.conf.rpmnew ] && mv -f /etc/e2guardian/e2guardianf1.conf.rpmnew /etc/e2guardian/e2guardianf1.conf.default
[ -e /etc/e2guardian/lists/urlregexplist.rpmnew ] && mv -f /etc/e2guardian/lists/urlregexplist.rpmnew /etc/e2guardian/lists/urlregexplist.default
[ -e /etc/e2guardian/lists/bannedregexpurllist.rpmnew ] && mv -f /etc/e2guardian/lists/bannedregexpurllist.rpmnew /etc/e2guardian/lists/bannedregexpurllist.default
[ -e /etc/vnstat.conf.rpmnew ] && mv -f /etc/vnstat.conf.rpmnew /etc/vnstat.conf.default
[ -e /etc/fail2ban/jail.conf.rpmnew ] && mv -f /etc/fail2ban/jail.conf.rpmnew /etc/fail2ban/jail.conf.default
[ -e /etc/ssh/sshd_config.rpmnew ] && mv -f /etc/ssh/sshd_config.rpmnew /etc/ssh/sshd_config.default
exit 0